Hello, and let's start off with the basics. I have owned a soft modded xbox for quiet some time, it has been ruffly 6 or more years in the running. What can i say you grow attached. I had the hair brained idea for my birthday to install boulders gate and play it with my dad. Long story short during one of my 2 a.m. FTP transfers I managed to corrupt my dash. So it was stuck at booting the Xbox logo to go completely black. No more UnleashX, just sadness. After many hours of tracking down the files, and getting the correct configuration was I able to finally get back into unleashX from NURDE. Here is the process that Involved restoring my xbox:
Materials
*Older computer with a working disc drive (Has to have 2 IDE ports on the motherboard for xboxHDM)
*NURDE 3.0
*XboxHDM
*Copy of MS Dash 5960
*Blank CD's
*Torx BIt
*Eeprom
*Time
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ok before I being this will only work if you have made a eeprom back up or have your HDpassword
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Lets begin, with system prep:
First you need to take apart the the system to begin "hotswapping"
Once you have the top lid of the system off you need to unplug the IDE cable AND power cable to the dvd drive.
Next I recommend that you loosen the hard drive from the tray, as it will allow for easier access.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DO NOT REMOVE THE TRAY, PUT THAT PLASTIC BACK IN THE SYSTEM YOU WILL GROUND OUT THE PSU
WITH ONE HARD DRIVE SLIP, IT WILL BE A BAD DAY FOR SURE.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Turn on the Xbox and let it boot. If you get error code: 11, or 12 you are golden (07, 16)-google it.
Just let that xbox chill, off for the next step.
Computer Prep:
Ok you now need to obtain the above listed files to be able to build a working boot-able xboxhdm iso
The base program really being xboxHDM as it is NURDE3.0 will be installing to.
You need to point the nurde installer at the "linux" folder inside the xboxHDM folder and allow the program to finish.
and extract the contents of the "MS dash" to the "C" folder under linux in xbox HDM as well
Dont forget to add the eeprom to the "eeprom" folder in " Linux"
Aft this has been done you can double click the make win ISO and should end up with a "Linux.ISO" about 669MB big.
Burn it using image burn or nero.....
now reboot your computer.
At P.O.S.T as soon as you PC turns on press pause\Break.
OK PC is done for now
Turn on the xbox to get error 12\11
Wait just a bit
Now you can hot swap IDE cables from xbox to IDE of your Motherboard
press backspace and boot to your CD
Booting that CD go a head and select the Linux locking and unlocking tools
Give the device the command to unlock the HD, CTRL,ALT,DEL when done to reboot the pc(only)
Now select option 2 for setting up your HD
it will have you verify that you are using an xbox HDD
Now set that bad boy up from scratch in using the first option runing xboxhd, CRTL ALT DEL reboot after you finish
Finally you back into the linux locking and lock your HD using the other command.
Turn off xbox when done.
Rebuild your xbox screws and all you are done. Enjoy having you xbox debricked from a bad
FTP.
*Edit*
So what i had managed to do was corrupt my entire C partition playing around with NURDE as a dashboard. I for some stupid reason deiced try and restore my C parition with the custom dash E partition by moving the file. During this time before the brick for some reason had a G drive that was gone after this operation failed. my dash that i had copied as well, My C partition was at about 21MB free. I thought an FTP of my dash back would fix it. After the system powered down is when the world of hurt started. !!!!!!!!!If you don't have a stock drive do not try to install or restore your C drive unless you have a back up!!!!!
Materials
*Older computer with a working disc drive (Has to have 2 IDE ports on the motherboard for xboxHDM)
*NURDE 3.0
*XboxHDM
*Copy of MS Dash 5960
*Blank CD's
*Torx BIt
*Eeprom
*Time
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ok before I being this will only work if you have made a eeprom back up or have your HDpassword
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Lets begin, with system prep:
First you need to take apart the the system to begin "hotswapping"
Once you have the top lid of the system off you need to unplug the IDE cable AND power cable to the dvd drive.
Next I recommend that you loosen the hard drive from the tray, as it will allow for easier access.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DO NOT REMOVE THE TRAY, PUT THAT PLASTIC BACK IN THE SYSTEM YOU WILL GROUND OUT THE PSU
WITH ONE HARD DRIVE SLIP, IT WILL BE A BAD DAY FOR SURE.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Turn on the Xbox and let it boot. If you get error code: 11, or 12 you are golden (07, 16)-google it.
Just let that xbox chill, off for the next step.
Computer Prep:
Ok you now need to obtain the above listed files to be able to build a working boot-able xboxhdm iso
The base program really being xboxHDM as it is NURDE3.0 will be installing to.
You need to point the nurde installer at the "linux" folder inside the xboxHDM folder and allow the program to finish.
and extract the contents of the "MS dash" to the "C" folder under linux in xbox HDM as well
Dont forget to add the eeprom to the "eeprom" folder in " Linux"
Aft this has been done you can double click the make win ISO and should end up with a "Linux.ISO" about 669MB big.
Burn it using image burn or nero.....
now reboot your computer.
At P.O.S.T as soon as you PC turns on press pause\Break.
OK PC is done for now
Turn on the xbox to get error 12\11
Wait just a bit
Now you can hot swap IDE cables from xbox to IDE of your Motherboard
press backspace and boot to your CD
Booting that CD go a head and select the Linux locking and unlocking tools
Give the device the command to unlock the HD, CTRL,ALT,DEL when done to reboot the pc(only)
Now select option 2 for setting up your HD
it will have you verify that you are using an xbox HDD
Now set that bad boy up from scratch in using the first option runing xboxhd, CRTL ALT DEL reboot after you finish
Finally you back into the linux locking and lock your HD using the other command.
Turn off xbox when done.
Rebuild your xbox screws and all you are done. Enjoy having you xbox debricked from a bad
FTP.
*Edit*
So what i had managed to do was corrupt my entire C partition playing around with NURDE as a dashboard. I for some stupid reason deiced try and restore my C parition with the custom dash E partition by moving the file. During this time before the brick for some reason had a G drive that was gone after this operation failed. my dash that i had copied as well, My C partition was at about 21MB free. I thought an FTP of my dash back would fix it. After the system powered down is when the world of hurt started. !!!!!!!!!If you don't have a stock drive do not try to install or restore your C drive unless you have a back up!!!!!
Last edited by phant0mg33k,