Tutorial Simple Guide to Downgrading your 3DS
- Thread starter Deleted member 370283
- Start date
- Views 1,347,812
- Replies 5,902
- Likes 69
- Status
Yes. There is a tutorial here on GBAtemp on how to install Rxtools. Emunand is part of the process.
Why do you say that?
You made the stickys much simpler. I can't concentrate on stuff long enoughYes. There is a tutorial here on GBAtemp on how to install Rxtools. Emunand is part of the process.
Why do you say that?
Its installing now. Hope it works! I can't breathe hahaha!
--------------------- MERGED ---------------------------
And it worked like a charm!
--------------------- MERGED ---------------------------
And it worked like a charm!
No you don't need to upgrade it works on all FW versions up to 10.3, just dont update the emunand past 9.5 on n3ds.
ok i got this extremely weird downgrade.
I just bought a new N3DS US today, it cames with 9.6 firmware.
I followed the instruction TheStoneBanana and used menuhax with ftBRONY trick, got into sysupdater in the first try, pressed Y. It ran for about 2-3 mins then "An error has occurred screen" appeared.
To my horror i tried to reboot, nothing happen, so i guess i bricked.
I went to recovery mode, tried to update to the latest firmware. However, again when the progess bar filled about 1/8 way, it failed to update and reboot.
So i take out the microsd card then for some reason was able to boot normally and saw this
So is it a fake downgrade or my lady luck helped me? Should i redo the downgrade process again?
edit: booting with microsd card inserted doesn't work.
The reason that this is occuring is that you had Menuhax installed and it's attempting to load it, the problem being that you are now on 9.2 and it doesn't like the newer hax. To fix this boot your 3ds without the sd card in it, then insert it, change the theme to clear the old Menuhax data and your set.
You haven't done anything wrong, it can take many attempts for the program to successfully grab the process it needs. Here is a few things you can try, attempt it using a different hax [Ironhax, Menuhax etc] I have seen a lot of people succeed with Menuhax. Try opening another homebrew app first, then close it with [L + R + Down + B], this works for some people. Other than that as long as nothing else appears on screen for 30 seconds, you should be ok to restart or close the program with the shortcut and try again. It took me 20 attempts before it worked properly.
Last edited by Santaros,
- Joined
- Sep 26, 2015
- Messages
- 71
- Trophies
- 0
- Age
- 25
- Location
- Floating through ecchi romance anime
- XP
- 101
- Country
just a little questions before going any further, the SysUpdater here in the OP is the latest/safest one to do the process?
also, I'm planning to downgrade a system that came with 10.1 right out of the box, it never had 9.2, is is safe to downgrade in this situation even if it never was on 9.2?
also, I'm planning to downgrade a system that came with 10.1 right out of the box, it never had 9.2, is is safe to downgrade in this situation even if it never was on 9.2?
Welp, turns out I didn't actually downgrade or something I guess... tried to run Pasta and just got a black screen. Some text flashed, but it was too fast to read. What should I do from here?
EDIT: False alarm... again? I don't know how, but I ran FTBrony for a few seconds, and this time (after a bit of a black screen), the system rebooted back to the Home screen. So.... it worked?
EDIT: False alarm... again? I don't know how, but I ran FTBrony for a few seconds, and this time (after a bit of a black screen), the system rebooted back to the Home screen. So.... it worked?
Last edited by zephor,
Yes it's fine to attempt to downgrade it, appears this is the latest: http://gbatemp.net/threads/simple-guide-to-downgrading-your-3ds.407888/page-95#post-5923820 unsure if it's the same in OP. FW wise the only problems I have heard of is 2 bricks attempting to downgrade to 4.5 from 9.2 [don't do this unless you have a hardmod, a 2nd hand PSP would be a much cheaper option for portable GBA than a brick], a 2ds shouldn't ever be taken below 6.0 [FW assumed a slider, which it doesn't have]. You also shouldn't update the emunand on a n3ds past 9.5, other than that you're fine.
.
You mean Pasta worked? I'm having trouble getting Homebrew working properly in emunand, but it works fine in Menuhax on Sysnand if that's any use to you. You could try installing a cia or something of the like, if it works your firmware is patched.
Last edited by Santaros,
Took a few tries, but the FBI.cia did install. I attribute the problems to the browserhax, though. Have always had problems using it for some reason. So I guess I'm in the clear then.
downloaded the cia files 6 times with different browsers and got this checksum everytime:
File Name: 9.2.0-20E-O3DS.ttp
MD5: 977CE39D70F6EA34172CCACA51813D7A
SH1: 9FEEE8D420759FFED3A34922739F6A526ACB26C8
doesnt match with the tutorial one. why??
File Name: 9.2.0-20E-O3DS.ttp
MD5: 977CE39D70F6EA34172CCACA51813D7A
SH1: 9FEEE8D420759FFED3A34922739F6A526ACB26C8
doesnt match with the tutorial one. why??
There in the ktm thread. There for ktm only look in the other threads on that site
--------------------- MERGED ---------------------------
The one that has 4x 6x mset in title
- Status
Similar threads
-
-
-
-
@
Xdqwerty:
@SylverReZ, do you mean when microsoft either fires hundreds of people from their subsidiaries or when they close them?+1 -
@
Psionic Roshambo:
The only Xbox I ever modded was the OG one soft mod larger hard drive and all that+1
-
-
-
-
@
BigOnYa:
Only Xbox I don't have is the OG, and One X model specifically, I regret giving my chipped OG model to one of my kids years ago, after later hearing he sold it to pawn shop, damn kids!+2 -
-
@
BigOnYa:
They have they own kids now that will pay them back for all the things they did to me, that's how it works, Karma.+2
-
-
-
@
BigOnYa:
I just recently picked up a n64 from a garage sell, and looking to mod it and add a HDMI port to it. https://www.ebay.com/itm/3548173115...044&customid=4f3038da73b61afddf7e5e90f4153856
-
-
@
BigOnYa:
I'd like to find a power strip and HDMI selector built in 1 unit, so I can select which game system I want, and will switch to that hdmi, and power on that plug/power supply only, so don't have all game systems powered all the time, but can't find anything like. May just have to make something myself.
-
@
BigOnYa:
Maybe start a kick starter page and sell them, yea right. Big N would prob C&D me, not anything Big N related, but just because that's what they do nowdays. Then come out with they own in a year or so.
-
-
-
-
-
-
-
-
@
SylverReZ:
@Xdqwerty, No. Whenever you use the internet on Windows, Microsoft collects personal data and installs bloatware that isn't necessarily needed, such as Edge.