Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

[joalex79]

Sorry for the wait. The lack of a public dump of 10.2 and the fact that BiggestDump has some issue with a pending update of 10.2 killed a lot of time. Thankfully new patches check out. As stated before, only FS was updated so only new FS/Loader patches are necessary. ES has not changed thus the existing ES patches still work. This means the only change was the patches.ini file which GBATemp won't let me upload due to its .ini extension filename. So whether you grab it from my zip file or the one in the OP, that is all you need to update for the time being. Next time, please hold off on updating. There are usually little to no advantages updating early.

fantastic it worked ty so much

 

[LeyendaV]

So these still work with 014.3/10.2.0, meaning we only need to update the fusee-primary patches?

 

[NoxiousNinja]

So these still work with 014.3/10.2.0, meaning we only need to update the fusee-primary patches?

If you're using fusee-secondary, you need the patches from this post for now, since the OP hasn't been updated yet: https://gbatemp.net/threads/sigpatc...see-secondary-only.571543/page-7#post-9199712

 

[crazycrash_hum]

Sorry for the wait. The lack of a public dump of 10.2 and the fact that BiggestDump has some issue with a pending update of 10.2 killed a lot of time. Thankfully new patches check out. As stated before, only FS was updated so only new FS/Loader patches are necessary. ES has not changed thus the existing ES patches still work. This means the only change was the patches.ini file which GBATemp won't let me upload due to its .ini extension filename. So whether you grab it from my zip file or the one in the OP, that is all you need to update for the time being. Next time, please hold off on updating. There are usually little to no advantages updating early.

Thank you but when i want to lauch atmosphère via hekate in cfw emummc there is an error :
Failed to aply 'emummc'!
and then when i press vol to go back on home screnn hekate other one error :
Failed to launch HOS !

maybe you have an answer to this problem ?

 

[Frost-Y]

I have the same problem keeps saying Failed to apply "emuMMC"

 

[Rickyman]

Thank you but when i want to lauch atmosphère via hekate in cfw emummc there is an error :
Failed to aply 'emummc'!
and then when i press vol to go back on home screnn hekate other one error :
Failed to launch HOS !

maybe you have an answer to this problem ?

I have the same problem keeps saying Failed to apply "emuMMC"

You probably need to update Hekate to version 5.3.3

 

[8BitWonder]

Sorry for the wait. The lack of a public dump of 10.2 and the fact that BiggestDump has some issue with a pending update of 10.2 killed a lot of time. ...

This tool can grab HOS updates if you don't want to wait on public dumps.
Note that it requires a cert, but you should definitely use one that is already dead.
Using a live cert with this will likely get it banned.
https://github.com/give-me-chocolate/ssu

 

[Ibcap]

This tool can grab HOS updates if you don't want to wait on public dumps.
Note that it requires a cert, but Nintendo's servers will still serve HOS updates to a dead certificate.
No need to burn a live cert if you have a dead one lying around.
https://github.com/give-me-chocolate/ssu

Please do not use a live cert for this, a friend of mine made it and we are not sure that it is safe. He actually didnt intend to publish it at all, seems the github was probably set public by accident.

 

[8BitWonder]

Please do not use a live cert for this, a friend of mine made it and we are not sure that it is safe. He actually didnt intend to publish it at all, seems the github was probably set public by accident.

Removed my comment.
I wasn't aware it being public was a mistake.

 

[Ibcap]

Removed my comment.
I wasn't aware it being public was a mistake.

Nah its fine, you can restore the post he doesnt care. He was more impressed that anyone actually managed to find it! Just be careful with using a cert, itll likely be banned.

 

[Draxzelex]

Its fine guys. I just dumped the system update from my sysMMC which I usually update to the latest firmware sooner or later. I was just a bit upset that BiggestDump was having issues grabbing the update while it was pending. Even the manual method didn't work.

 

[capsleepyy]

Sorry for the wait. The lack of a public dump of 10.2 and the fact that BiggestDump has some issue with a pending update of 10.2 killed a lot of time. Thankfully new patches check out. As stated before, only FS was updated so only new FS/Loader patches are necessary. ES has not changed thus the existing ES patches still work. This means the only change was the patches.ini file which GBATemp won't let me upload due to its .ini extension filename. So whether you grab it from my zip file or the one in the OP, that is all you need to update for the time being. Next time, please hold off on updating. There are usually little to no advantages updating early.

Patches work perfectly, thanks!

 

[catlady77]

Sorry for the wait. The lack of a public dump of 10.2 and the fact that BiggestDump has some issue with a pending update of 10.2 killed a lot of time. Thankfully new patches check out. As stated before, only FS was updated so only new FS/Loader patches are necessary. ES has not changed thus the existing ES patches still work. This means the only change was the patches.ini file which GBATemp won't let me upload due to its .ini extension filename. So whether you grab it from my zip file or the one in the OP, that is all you need to update for the time being. Next time, please hold off on updating. There are usually little to no advantages updating early.

ok sorry, im just double checking, these are sigpatches for 10.2?

 

[Ibcap]

ok sorry, im just double checking, these are sigpatches for 10.2?

Yes drax' post works for 10.2.0 and 0.14.3

 

[DestinySky]

Yes drax' post works for 10.2.0 and 0.14.3

Not really.
I got atmos error when installing game.

Update:
Error only when installing to internal memory.
Installing to SD no problem
I'm using Awoo-nior

Update2:
After installing game to SD, I used the HOS Data Management to move the game to internal memory, Atmos panic error.

I'm on Atmos 14.3, Hekate 5.3.3, using FSS
My emunand is file based.

 

[proffk]

Atmosphere 0.14.4 just got released which means new sigpatches may be required.

 

[NoxiousNinja]

I have only a vague idea of what I'm doing, but Loader looks almost unchanged from 0.14.3, so this may work:

Take the file from https://gbatemp.net/threads/sigpatc...see-secondary-only.571543/page-7#post-9199712

Add this to the bottom of bootloader/patches.ini:

#Loader Atmosphere-0.14.4
[Loader:20EFF0183DA09563]
.nosigchk=0:0x1B54:0x4:20A81839,20008052
.nosigchk=0:0x686C:0x4:48010054,1F2003D5

I have absolutely no idea how the fusee-primary patches work, though, so no help from me on those.

 

[Pender666]

I have only a vague idea of what I'm doing, but Loader looks almost unchanged from 0.14.3, so this may work:

Take the file from https://gbatemp.net/threads/sigpatc...see-secondary-only.571543/page-7#post-9199712

Add this to the bottom of bootloader/patches.ini:

#Loader Atmosphere-0.14.4
[Loader:20EFF0183DA09563]
.nosigchk=0:0x1B54:0x4:20A81839,20008052
.nosigchk=0:0x686C:0x4:48010054,1F2003D5

I have absolutely no idea how the fusee-primary patches work, though, so no help from me on those.

Working great! Thanks!!!!

 

[Holiday_Ougi]

I have only a vague idea of what I'm doing, but Loader looks almost unchanged from 0.14.3, so this may work:

Take the file from https://gbatemp.net/threads/sigpatc...see-secondary-only.571543/page-7#post-9199712

Add this to the bottom of bootloader/patches.ini:

#Loader Atmosphere-0.14.4
[Loader:20EFF0183DA09563]
.nosigchk=0:0x1B54:0x4:20A81839,20008052
.nosigchk=0:0x686C:0x4:48010054,1F2003D5

I have absolutely no idea how the fusee-primary patches work, though, so no help from me on those.

Working perfectly

 

[roqnrob]

Working perfectly

this works but I still can't install Mario 3d or Smash Bros. etc.