Hacking seedminer (single system DSiWare injection)

[Hunter]

Sorry for the stupid questions, but what exactly should I type in the cmd to run the .py? I tried a couple of different commands, but i'n not as good at messing with cmd as I thought I would be lol

"seedminer_starter.exe ID0" to extract your ID0 and place that into the movable_part1.sed

 

[huntertron1]

Hey @Hunter when I need it, could you help me with helping other people get their movable.sed I don't know if you saw my post I made earlier about making a help thread, but I made one so people can get help with getting their movable.sed and use the friend code method.


Also, thanks @zoogie for putting my thread in the op. Means a lot to me. lol

sure if you can help me with mine. i saw

I might be able to help, if not than someone should get to you soon. Only reason I might not be able to help is cause it's gonna take a while to do the two other people I have waiting for me to do it and by then you should, hopefully, have someone doing it for you.

so sure

 

[zoogie]

If you have a dedicated Gpu, run "python seedminer_launcher.py gpu"

If you want to use the cpu (which can and probably will take days,) use "python seedminer_launcher.py cpu" (without quotation marks of course)

Right now I'd say if you have a brand new system, or any new3ds/2ds, CPU shouldn't take more than a day.

The trouble spots are old3ds original and old3dsXL (or if you transferred from one to a new system). That's where we could really use more msed_data.

I'll post the graph again so you all can see this:

Notice the tight clustereing of dots on the new3ds (red) graph. Same with the newer old3ds's. (old3ds is blue)
That's what we want for the older old3ds's.

Note: The greater the LFCS, the newer the system. It's almost like a region-free serial number.

 

[ZZ20]

Right now I'd say if you have a brand new system, or any new3ds/2ds, CPU shouldn't take more than a day.

The trouble spots are old3ds original and old3dsXL (or if you transferred from one to a new system). That's where we could really use more msed_data.

I'll post the graph again so you all can see this:

Notice the tight clustered of dots on the new3ds (red) graph. Same with the newer old3ds's.
That's what we want for the older old3ds's.

Ah, I see, I see. Understandable. Though, what do the bottom numbers on the graph mean?

 

[Hunter]

@zoogie i'l grab my old3ds and my niece's one from my sister when she comes around later today, and i'll bruteforce them to have some extra msed data

 

[ZZ20]

I wish I could help with the old3ds, but I don't have any I could do, besides 1 friend with an old2ds.

 

[zoogie]

Ah, I see, I see. Understandable. Though, what do the bottom numbers on the graph mean?

That's the LFCS converted to decimal exponent 1e8. I wish it were hex, but not in the mood to become an expert in matplotlib right now. Bigger fish to fry

 

[huntertron1]

I wish I could help with the old3ds, but I don't have any I could do, besides 1 friend with an old2ds.

so yeah im happy to help

 

[ZZ20]

That's the LFCS converted to decimal exponent 1e8. I wish it were hex, but not in the mood to become an expert in matplotlib right now. Bigger fish to fry

Ah, Understandable, have a nice day

 

[CrazyButtStabber]

"seedminer_starter.exe ID0" to extract your ID0 and place that into the movable_part1.sed

Thanks, this worked but It gave me this error.

D:\>"D:\Nintendo 3DS\seedminer_launcher.py" ID0
Nintendo 3DS -- not an ID0
DCIM -- not an ID0
System Volume Information -- not an ID0
3ds -- not an ID0
boot.3dsx -- not an ID0
screenshots_raw.bin -- not an ID0
movable_part1.sed -- not an ID0
movable_part1.sed.backup -- not an ID0

No hashes added!
There are now 0 ID0 hashes in your movable_part1.sed!
Done!

 

[Hunter]

Thanks, this worked but It gave me this error.

D:\>"D:\Nintendo 3DS\seedminer_launcher.py" ID0
Nintendo 3DS -- not an ID0
DCIM -- not an ID0
System Volume Information -- not an ID0
3ds -- not an ID0
boot.3dsx -- not an ID0
screenshots_raw.bin -- not an ID0
movable_part1.sed -- not an ID0
movable_part1.sed.backup -- not an ID0

No hashes added!
There are now 0 ID0 hashes in your movable_part1.sed!
Done!

CD "Nintendo 3DS"

then try again

 

[ZZ20]

Hey, I am actually having a problem with my new2dsxl. Strange one too. whenever I put my new2dsxl into sleep mode, it soft bricks. any solution


Edit: nvm just takes a long while to show up again

 

[huntertron1]

Hey, I am actually having a problem with my new2dsxl. Strange one too. whenever I put my new2dsxl into sleep mode, it soft bricks. any solution


Edit: nvm just takes a long while to show up again

ahh. softbrick. my wihte wii used to be softed bricked becuse of priiloader. then i found a solution to bypass the passwordscreen

 

[CrazyButtStabber]

Now I get this error

D:\Nintendo 3DS>seedminer_launcher.py ID0
Traceback (most recent call last):
File "D:\Nintendo 3DS\seedminer_launcher.py", line 87, in <module>
hash_clusterer()
File "D:\Nintendo 3DS\seedminer_launcher.py", line 38, in hash_clusterer
f=open("movable_part1.sed","rb")
IOError: [Errno 2] No such file or directory: 'movable_part1.sed'

 

[ZZ20]

Now I get this error

D:\Nintendo 3DS>seedminer_launcher.py ID0
Traceback (most recent call last):
File "D:\Nintendo 3DS\seedminer_launcher.py", line 87, in <module>
hash_clusterer()
File "D:\Nintendo 3DS\seedminer_launcher.py", line 38, in hash_clusterer
f=open("movable_part1.sed","rb")
IOError: [Errno 2] No such file or directory: 'movable_part1.sed'

Now you want to put the Movable_part1.sed in the seedminer dir.

 

[Hunter]

Now you want to put the Movable_part1.sed in the seedminer dir.

@CrazyButtStabber

in your "Nintendo 3DS" directory

 

[CrazyButtStabber]

Now you want to put the Movable_part1.sed in the seedminer dir.

That worked. Thank you all for the help

 

[CrazyButtStabber]

Ok, So I managed to succesfully create my movable.sed and msed data bin file. I have downloaded TADpole But i am not sure how to use it.

 

[Hunter]

Ok, So I managed to succesfully create my movable.sed and msed data bin file. I have downloaded TADpole But i am not sure how to use it.

skip tadpole and use https://jenkins.nelthorya.net/job/DSIHaxInjector/ for Sudoku only

 

[ZZ20]

Ok, So I managed to succesfully create my movable.sed and msed data bin file. I have downloaded TADpole But i am not sure how to use it.

which game will you use?