no, it uses 7.x crypto. they only use it on certain sections, though. namely the code section in the exefs and the entire romfs.
no, it uses 7.x crypto. they only use it on certain sections, though. namely the code section in the exefs and the entire romfs.
I am now trying to change the icon with makerom using the .rsf file. The problem is, when I load up the ROM, it keeps giving me the same error that I had earlier where it tells me that an error has occurred and I need to turn the power off.
I have also tried putting the extracted data from the RomFS in a decrypted/romfs file structure (like what the HostRoot field in the .rsf file was set to) on both the SD card and the Gateway microSD card, but that made no difference. I then tried inserting the RomFS into the 0-key encrypted ROM by adding on to the previous makerom command that I was using, but that did not work either.
Is there some step that I am missing?
Here is the configuration from the .rsf file that I was using, just in case it helps:
Code:
BasicInfo:
Title : "SUPER MARIO 3D LAND"
CompanyCode : "00"
ProductCode : "*your code here"
ContentType : Application
Logo : Licensed # Nintendo / Licensed / Distributed / iQue / iQueForSystem
Rom:
# Specifies the root path of the file system to include in the ROM.
HostRoot : "decrypted/romfs"
TitleInfo:
UniqueId : 0x0D5A
Category : Application
CardInfo:
MediaSize : 1GB # 128MB / 256MB / 512MB / 1GB / 2GB / 4GB
MediaType : Card1 # Card1 / Card2
CardDevice : None # NorFlash(Pick this if you use savedata) / None
Option:
FreeProductCode : true # Removes limitations on ProductCode
MediaFootPadding : true # If true CCI files are created with padding
EnableCrypt : true # Enables encryption for NCCH and CIA
EnableCompress : true # Compresses exefs code
ExeFs: # these are the program segments from the ELF, check your elf for the appropriate segment names
ReadOnly:
- .rodata
- RO
ReadWrite:
- .data
- RO
Text:
- .init
- .text
- STUP_ENTRY
PlainRegion: # only used with SDK ELFs
- .module_id
AccessControlInfo:
#UseExtSaveData : true
#ExtSaveDataId: 0xff3ff
#UseExtendedSaveDataAccessControl: true
#AccessibleSaveDataIds: [0x101, 0x202, 0x303, 0x404, 0x505, 0x606]
SystemControlInfo:
SaveDataSize: 2048KB
RemasterVersion: 0
StackSize: 0x40000
# DO NOT EDIT BELOW HERE OR PROGRAMS WILL NOT LAUNCH (most likely)
AccessControlInfo:
FileSystemAccess:
- Debug
- DirectSdmc
- DirectSdmcWrite
IdealProcessor : 0
AffinityMask : 1
Priority : 16
MaxCpu : 0x9E # Default
CoreVersion : 2
DescVersion : 2
ReleaseKernelMajor : "02"
ReleaseKernelMinor : "33"
MemoryType : Application
HandleTableSize: 512
IORegisterMapping:
- 1ff50000-1ff57fff
- 1ff70000-1ff77fff
MemoryMapping:
- 1f000000-1f5fffff:r
SystemCallAccess:
ArbitrateAddress: 34
Break: 60
CancelTimer: 28
ClearEvent: 25
ClearTimer: 29
CloseHandle: 35
ConnectToPort: 45
ControlMemory: 1
CreateAddressArbiter: 33
CreateEvent: 23
CreateMemoryBlock: 30
CreateMutex: 19
CreateSemaphore: 21
CreateThread: 8
CreateTimer: 26
DuplicateHandle: 39
ExitProcess: 3
ExitThread: 9
GetCurrentProcessorNumber: 17
GetHandleInfo: 41
GetProcessId: 53
GetProcessIdOfThread: 54
GetProcessIdealProcessor: 6
GetProcessInfo: 43
GetResourceLimit: 56
GetResourceLimitCurrentValues: 58
GetResourceLimitLimitValues: 57
GetSystemInfo: 42
GetSystemTick: 40
GetThreadContext: 59
GetThreadId: 55
GetThreadIdealProcessor: 15
GetThreadInfo: 44
GetThreadPriority: 11
MapMemoryBlock: 31
OutputDebugString: 61
QueryMemory: 2
ReleaseMutex: 20
ReleaseSemaphore: 22
SendSyncRequest1: 46
SendSyncRequest2: 47
SendSyncRequest3: 48
SendSyncRequest4: 49
SendSyncRequest: 50
SetThreadPriority: 12
SetTimer: 27
SignalEvent: 24
SleepThread: 10
UnmapMemoryBlock: 32
WaitSynchronization1: 36
WaitSynchronizationN: 37
InterruptNumbers:
ServiceAccessControl:
- APT:U
- $hioFIO
- $hostio0
- $hostio1
- ac:u
- boss:U
- cam:u
- cecd:u
- cfg:u
- dlp:FKCL
- dlp:SRVR
- dsp::DSP
- frd:u
- fs:USER
- gsp::Gpu
- hid:USER
- http:C
- mic:u
- ndm:u
- news:u
- nwm::UDS
- ptm:u
- pxi:dev
- soc:U
- ssl:C
- y2r:u
- ldr:ro
- ir:USER
SystemControlInfo:
Dependency:
ac: 0x0004013000002402L
am: 0x0004013000001502L
boss: 0x0004013000003402L
camera: 0x0004013000001602L
cecd: 0x0004013000002602L
cfg: 0x0004013000001702L
codec: 0x0004013000001802L
csnd: 0x0004013000002702L
dlp: 0x0004013000002802L
dsp: 0x0004013000001a02L
friends: 0x0004013000003202L
gpio: 0x0004013000001b02L
gsp: 0x0004013000001c02L
hid: 0x0004013000001d02L
http: 0x0004013000002902L
i2c: 0x0004013000001e02L
ir: 0x0004013000003302L
mcu: 0x0004013000001f02L
mic: 0x0004013000002002L
ndm: 0x0004013000002b02L
news: 0x0004013000003502L
nim: 0x0004013000002c02L
nwm: 0x0004013000002d02L
pdn: 0x0004013000002102L
ps: 0x0004013000003102L
ptm: 0x0004013000002202L
ro: 0x0004013000003702L
socket: 0x0004013000002e02L
spi: 0x0004013000002302L
ssl: 0x0004013000002f02L
CommonHeaderKey:
D: |
jL2yO86eUQnYbXIrzgFVMm7FVze0LglZ2f5g+c42hWoEdnb5BOotaMQPBfqt
aUyAEmzQPaoi/4l4V+hTJRXQfthVRqIEx27B84l8LA6Tl5Fy9PaQaQ+4yRfP
g6ylH2l0EikrIVjy2uMlFgl0QJCrG+QGKHftxhaGCifdAwFNmiZuyJ/TmktZ
0RCb66lYcr2h/p2G7SnpKUliS9h9KnpmG+UEgVYQUK+4SCfByUa9PxYGpT0E
nw1UcRz0gsBmdOqcgzwnAd9vVqgb42hVn6uQZyAl+j1RKiMWywZarazIR/k5
Lmr4+groimSEa+3ajyoIho9WaWTDmFU3mkhA2tUDIQ==
Exponent: |
AQAB
Modulus: |
zwCcsyCgMkdlieCgQMVXA6X2jmb1ICjup0Q+jk/AydPkOgsx7I/MjUymFEkU
vgXBtCKtzh3NKXtFFuW51tJ60GPOabLKuG0Qm5li+UXALrWhzWuvd5vv2FZI
dTQCbrq/MFS/M02xNtwqzWiBjE/LwqIdbrDAAvX4HGy0ydaQJ1DKYeQeph5D
lAGBw2nQ4izXhhuLaU3w8VQkIJHdhxIKI5gJY/20AGkG0vHD553Mh5kBINrWp
CRYmmJS8DCYbAiQtKbkeUfzHViGTZuj6PwaY8Mv39PGO47a++pt45IUyCEs4/
LjMS72cyfo8tU4twRGp76SFGYejYj3wGC1f/POQw==
Signature: |
BOPR0jL0BOV5Zx502BuPbOvi/hvOq5ID8Dz1MQfOjkey6FKP/6cb4f9YXpm6c
ZCHAZLo0GduKdMepiKPUq1rsbbAxkRdQdjOOusEWoxNA58x3E4373tCAhlqM2
DvuQERrIIQ/XnYLV9C3uw4efZwhFqog1jvVyoEHpuvs8xnYtGbsKQ8FrgLwXv
pOZYy9cSgq+jqLy2D9IxiowPcbq2cRlbW9d2xlUfpq0AohyuXQhpxn7d9RUor
9veoARRAdxRJK12EpcSoEM1LhTRYdJnSRCY3x3p6YIV3c+l1sWvaQwKt0sZ/U
8TTDx2gb9g7r/+U9icneu/zlqUpSkexCS009Q==
Descriptor: |
AP///wAABAACAAAAAAAFGJ4AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAiIAAAAAAAABBUFQ6VQAAACRo
aW9GSU8AJGhvc3RpbzAkaG9zdGlvMWFjOnUAAAAAYm9zczpVAABjYW06dQAA
AGNlY2Q6dQAAY2ZnOnUAAABkbHA6RktDTGRscDpTUlZSZHNwOjpEU1BmcmQ6
dQAAAGZzOlVTRVIAZ3NwOjpHcHVoaWQ6VVNFUmh0dHA6QwAAbWljOnUAAABu
ZG06dQAAAG5ld3M6dQAAbndtOjpVRFNwdG06dQAAAHB4aTpkZXYAc29jOlUA
AABzc2w6QwAAAHkycjp1AAAAbGRyOnJvAABpcjpVU0VSAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAABOn/rw/7//8ec/APIA8JH/APaR/1D/gf9Y/4H/cP+B/3j/gf8B
AQD/AAIA/iECAPz/////////////////////////////////////////////
////////////////////////////////////////AAAAAAAAAAAAAAAAAAAA
AAADAAAAAAAAAAAAAAAAAAI=
wich game do ou want to recompile?, and you probably need to replace the exheader.
I want to recompile Dream Team with a UniqueID of a game that supports Miiverse screenshots (such as Super Mario 3D Land). Hopefully Miiverse will recognize 0-key encrypted games and I will be able to trick it into thinking that I am playing something different.
Will a game work correctly when it has an Exheader from a different game, or do you mean replace it with an edited version of its original Exheader?
What did you do to Smash that required you to recompile it?
Uh, nothing. I just changed the crypto.
I got my friend comex to write some nice tools for the data.
https://github.com/comex/smash-stuff
Uh, nothing. I just changed the crypto.
I got my friend comex to write some nice tools for the data.
https://github.com/comex/smash-stuff
I look forward to when the end user will be able to use that! Gonna be fun messing with custom character modifications and skins! Nice work!
I managed to successfully decrypt Fire Emblem: Awakening, but I've ran into a tiny snag.
Is this some way to make ctrtool output Japanese file names? It's just giving me hashes in place of Japanese.
If there are, say, 30 files with different names in Japanese, but their names are all 4 letters long, I only get one file called ####.
Is this some way to make ctrtool output Japanese file names? It's just giving me hashes in place of Japanese.
If there are, say, 30 files with different names in Japanese, but their names are all 4 letters long, I only get one file called ####.
That works too. I'm just after any solution : Punicode support would be best... not specific support for one language
I thought about renaming the files in the ROM itself, but there are so many files...
Is your .rsf file configured differently? What are the exact steps you took from start to finish and which tools (and versions of them) and exact files did you use?not sure where you went wrong, but it does work and its very simple to do
bog standard rsf file with unique ID put in, the normal makerom and ctrtool, and rebuilt blargsnes...nothing special
First, try getting homebrew disguised as a different game, like what gamesquest1 did. Like I said, makerom doesn't work with most retail games just yet.
At least, without a better understanding of the way it works, and a more technical process.
Did you also try to do this with a downloaded ROM (If so, with or without a header? Which exact header did you use if you added one?) or a game card backup?
what do you mean 
i rebuilt blargsnes and changed the uniqueID to the unique ID of new super mario bros 2....it takes like 2 minutes, no downloading roms or headers or ny of that stuff
i rebuilt blargsnes and changed the uniqueID to the unique ID of new super mario bros 2....it takes like 2 minutes, no downloading roms or headers or ny of that stuff
[user]I pwned U![/user], if you want custom images on Miiverse, it might be easier to just do what gamesquest1 did and load a custom NES rom on 3DNES that displays whatever silly image you require.
Or, if you've got some technical knowledge, you could make a homebrew that displays an image on the top screen. That would work, too.
Or, if you've got some technical knowledge, you could make a homebrew that displays an image on the top screen. That would work, too.
-
K3Nv2
-
Xdqwerty
what are you looking at? -
Psionic Roshambo
-
-
-
-
-
-
-
-
-
-
-
@
SylverReZ:
PSA: Update Windows NOW. https://www.forbes.com/sites/daveyw...ttack-all-windows-users-warned-to-update-now/ -
-
-
-
-
-
-
-
-
-
-
-
-
-
