Homebrew R4 3ds doesnt work after ntrboot

[Doobs]

Hi. I recently been able to use my r4 3ds rts to install luma3ds on my friend 2ds. I followed the 3ds.guide very carefully. I used the multi system method as i already had a flashed 3ds. Everything went smoothly when flashing the safeb9s installer to my r4. But i recently tried installing it on another 3ds and it woulndt work. I was stuck at using the magnet and pressing x start select and power. It just would not work.

I tried restoring the original kernel and dumping it multiple time but no result. Even though it always says everything was succesful when using ntr_boot payload. I cant even use it as a regular 3ds now. Could it be the micro sd card that went bad? I dont know what to do.

My english is really bad so dont hesitate to ask for clarification

 

[Quantumcat]

What is it doing exactly when it "doesn't work"? Example is the home screen coming up? Light going on then off? Etc. You may not be doing it right.

 

[Doobs]

I mean the 3ds is acting normally. Its just not booting safeb9s thingy when i do the magnet trick. Like i said i k ow what im doing because ive done it once. The r4 is what might be the culprit because i cant even revert it to its original state.

 

[Quantumcat]

But exactly what happens when you hold the key combo and turn it on. There's a number of different things that can happen that each point to a different cause. If you don't give us any information we can't help you.

 

[Doobs]

Nothing happens. I mean its supposed to already be powered on. Then i put the magnet it goes to sleep i press the buttons hold for 5 seconds or so. Relase but leave the magnet there. And nothing happens

 

[Majickhat55]

Nothing happens. I mean its supposed to already be powered on. Then i put the magnet it goes to sleep i press the buttons hold for 5 seconds or so. Relase but leave the magnet there. And nothing happens

Then you're doing it wrong. You only do it when the console is on to find the "sweet spot" for the magnet.

You need to turn the console off then, put the flashcard in, then turn it on with the magnet in place with the buttons (power+start+select+x) for a few seconds and then release them without removing the magnet.

 

[Doobs]

Oh wow i feel like a complete retard. my english failed me once again. i just checked the guide again. thank you so much lol

 

[Majickhat55]

Oh wow i feel like a complete retard. my english failed me once again. i just checked the guide again. thank you so much lol

NO worries, we're only human Lol.