PS5 UART Setup CH341A

[gavin25]

Turning EMC cmd mode: [On]

OK 00000000:3A
$$ [MANU] UART CMD READY:36
NG E0000004:4E:01
: Secure charger error):8C:E5
NG E0000004:4E:01
80870003 Error after safe loader:4C:FD
NG F0000006:51:F1
D RAM DDR4 error (power failure/short circuit) (DA9081 1.2V Side:apu):27:6B
NG E0000004:4E:01
80871055 SSD bank/s error:54:F7
NG F0000006:51:F1
0871062 SSD controller Southbridge data line error:7A:F4
NG E0000004:4E:01
52:67
NG E0000004:4E:01
001 SSD/DDR4 controller error (power failure/short circuit) (DA9081 ..):EC:A4
NG E0000004:4E:01
/DDR4 controller error (power failure/short circuit) (DA9081 ..):EF:0C
NG E0000004:4E:01
e/short circuit) (DA9081 2.5V):80:75
NG E0000004:4E:01
NG E0000004:4E:01
NG F0000006:8089400A *? (related: SSD/DDR4 controller error):B851
ure charger error):8C:E5
NG E0000004:4E
NG E0000004:4E:01
NG F0000006:51
0870003 Error after safe loader:4C:FD
NG E0000004:4E
ilure/short circuit) (DA9081 1.2V Side:apu):27:6B
NG E0000004:4E
7
NG E0000004:4E
G F0000006:51:F1
NG E0000004:4E
SSD controller Southbridge data line error:7A:F4
NG E0000004:4E
4E:01
NG E0000004:4E
001 SSD/DDR4 controller error (power failure/short circuit) (DA9081 ..):EC:A4
NG F0000006:51
power failure/short circuit) (DA9081 ..):EF:0C
NG E0000004:4E
75
NG E0000004:4E
NG E0000004:4E:01
NG F0000006:51

hello,i got this code, it's mean this PS5 ssd problem ? or contorl IC CXD90062GG? before my PS5 second beeps then BLOD, sometime it will into restore model(black screen and need connect contorller with cable). i check motherboard no had short. thanks advence and sorry my bad english.

update: i turn on the show bytecodes,then i off it, now get the new code, and i check errcode. mean is CXD90062GG broken. it's right? but this SSD/DDR4 had any problem??

 

[stetofix]

Very strange output at all. (no commands/NG returns/partial error code description)
I guess this is not ps5 we tools.

Can you sent a dump of the nor data?

 

[gavin25]

sorry, before i used wrong way in wee-tools. now i got the new codes.

errlog 0B
errlog 0B
OK 00000000 80C00140 170007C1 81BF0005 00000000 2179 0016 1F8A 176B:1D
errlog 1C
errlog 1C
OK 00000000 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFF FFFF FFFF FFFF:5A

other same errlog 1 message !
so error code is "80C00140"?
i check it's "80C00140 APU is not responding - GDDR6 data line problem"?
and if DDR6 chip broken,where can buy? or only form other PS5 console can take it?

 

[stetofix]

Error code 80C00140 can be caused by
- bga problem at APU
- liquid metal spill on top of the APU
- bga problem at GDDR6 ram ics

I would take used ones from a PS5 as replacement.
I couldn't find the exact model number for purchase on digikey/mouser/....
Micron (D9ZPL/9DXKV) and Samsung (K4ZAF325BM-SC14) GDDR6 ram ics can't be mixed.

 

[fox_yt]

Se você desconectar o cabo de alimentação do PS5 e conectá-lo novamente,
faz uma mensagem:

OK 00000000:3A
$$ [MANU] UART CMD PRONTO:36

aparece na tela? (Pode levar até 20 segundos após reconectar o cabo de alimentação)

Caso contrário, verifique se TX e RX com fios desconectados do programador indicam 3,3V.

Não funciona já tentei de tudo

Post automatically merged: Jun 21, 2024

Não importa onde os 12V são gerados. Se a fonte de alimentação puder fornecer aproximadamente 320 mA, tudo bem.
A ponte sul deve começar a funcionar assim que os 12V estiverem presentes e o tx e o rx devem mostrar 3,3V

Fz o mod de 3.3v e meu ch3 341a fica só com 5 volts no tx e RX não consegui fazer funcionar de jeito nenhum

 

[Zeeko]

Just a polite reminder for those having problem with finding serial port, the yellow 2 pins jumper has to be in the same position as picture in original post. The default yellow jumper was in the 2 pins on right side. If it is in the first 2 right pins the serial port number will not show in device manager and programme won't work,

 

[harun-cuk17]

Here a little image of my CH341A with a 3.3V mod for use with the TX/RX from southbride of the PS5.

View attachment 417586

This are the UART points on the board

edm-010/020

View attachment 417587

edm-03x

View attachment 417588

There are different programs for communication:

PS5 wee tools: GitHub - andy-man/ps5-wee-tools: Tools for PS5 NOR manipulations
Here is a bit of manual typing commands necessary:

At main menu:

• choose: (2: Terminal (UART))
• choose correct COM Port with reader
• press ‘CTRL+E’ to enter EMC cmd mode
• type ‘errlog 0’
• type ‘errlog 1’
• … (there maybe more than one error)
• answers looks like:
  errlog 0: OK 00000000 80810001 166A347C FFFF0042 00000000 217C 0004 FFFF FFFF:BA
  The bold is the error number. You can check the error list for the meaning: PS5 UART commands | GBAtemp.net - The Independent Video Game Community
• if the answer is FFFFFFFF you reached the end of the error logs
• with ‘errlog clear’ you can reset all error logs

I did al those steps but I get an error when I open the program. Any idea why ?

 

[stetofix]

If you have problems executing "andy man ps5 wee tools" at all, maybe check CST.

 

[harun-cuk17]

If you have problems executing "andy man ps5 wee tools" at all, maybe check CST.

I tried the cst and wee tools and i got this code 808300f. It says “secure loader error”
Nothing else. Anyone any idea what I am doing wrong or what this code means?

 

[crow84_arg]

Hello dear people, I have a problem and it is that it is not detecting anything directly.
-First, am I wrong or I see well? the pin15 of the ch341a is CTS in uart mode. in any case the pin to be lifted and soldered is the vcc pin28.
-second i did everything you posted but when i connect the 12v of the regulated source i have no response, in the terminal. even if i give the switch it makes the beep. but it turns off because there is something wrong. but the software (wee tools 1.5 & 1.7 that i bought it) does not read anything at all.
- I tried ctrl+e errlog 0 , 1 nothing.
-when i enter ctrl+b this : 00. when i turn on the 12v and when i turn off the same.


thx in advance.

 

[stetofix]

Please swap the red and the blue wire at the CH341A.

See TX as mouth that talks and RX as ear that hears.

Please connect
TX (PS5) to RX (Ch341A)
RX (PS5) to TX (CH341A)

 

[crow84_arg]

Please swap the red and the blue wire at the CH341A.

See TX as mouth that talks and RX as ear that hears.

Please connect
TX (PS5) to RX (Ch341A)
RX (PS5) to TX (CH341A)

works! i have the codes

 

[nanofix]

@stetofix Thanks so much for making this guide! Saved me from buying a UART reader If anyone's interested, I made a video here showing how to setup the CH341A to read error codes like stetofix explained:

 

[ultimaterepairs]

s

Post automatically merged: Jan 28, 2025

can anyone help me with the following error messages on my ps5 any ideas?

Error Code: 80000009, Description: Unexpected Power Cut or Shutdown Failure
Raw Response: OK 00000000 80000009 FFFFFFFF FFFF0012 00000000 2019 0004 FFFF FFFF:16

Error Code: 80810001, Description: General Power Failure (Periphery, GDDR6, APU, Data Line Short)
Raw Response: OK 00000000 80810001 FFFFFFFF FFFF0042 00000000 217C 0004 FFFF FFFF:2B

Error Code: 80000009, Description: Unexpected Power Cut or Shutdown Failure
Raw Response: OK 00000000 80000009 FFFFFFFF FFFF0042 00000000 217C 0004 FFFF FFFF:2A

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 00000041 FFFF00E5 00000100 217B 0036 330D 11D6:28

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 00000041 FFFF00E5 00000100 217B 0036 3302 11D4:14

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 00000041 FFFF0005 00000100 2157 0036 32F7 11D4:0C

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 00000041 FFFF0005 00000100 2157 0036 32EB 11D4:16

Error Code: 80000009, Description: Unexpected Power Cut or Shutdown Failure
Raw Response: OK 00000000 80000009 00000041 FFFF0005 00000100 2157 0036 32EB 11D4:0C

Error Code: E3122336, Not found. Please report your findings.
Error Code: E2E0041D, Not found. Please report your findings.
Error Code: E2200000, Description: Known Unknown 623 (Rare - Report Immediately)
Raw Response: OK 00000000 E2200000 FFFFFFFF FFFF0000 00000000 2004 0000 0000 0000:61

Error Code: E1200000, Description: Known Unknown 545 (Rare - Report Immediately)
Raw Response: OK 00000000 E1200000 FFFFFFFF FFFF0000 00000000 2004 0000 0000 0000:60

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18899630 FFFF00E5 00000100 2196 0036 1914 1174:2B

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18899630 FFFF00E5 00000100 217B 0036 1912 1171:30

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18899630 FFFF00E5 00000100 217B 0036 1910 116F:42

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18899630 FFFF00E5 00000100 217B 0036 190F 1170:42

Error Code: 80000009, Description: Unexpected Power Cut or Shutdown Failure
Raw Response: OK 00000000 80000009 18899630 FFFF0005 00000100 2157 0036 190F 1170:16

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18871AC4 FFFF00E5 00000100 217B 0036 2E20 16E4:67

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18871AC4 FFFF00E5 00000100 217B 0036 2E20 16E1:64

Error Code: C0020303, Description: APU Not Responding - Trying Init or Reboot - 3
Raw Response: OK 00000000 C0020303 18871AC4 FFFF00E5 00000100 217B 0036 2E1F 16E3:7B

 

[stetofix]

Seems to be an issue with the XDPE controller:
E1200000 XDPE phase pwm controller error VRM 2 phases
E2200000 XDPE phase pwm controller error VRM 6 phases

 

[Shady0808]

I have a FT232RL FTDI "YP-05" module which I'm now assuming doesn't work with PS5 as I'm not getting the :

OK 00000000:3A
$$ [MANU] UART CMD READY:36

Any ideas? Getting 3.3V from both the TX and RX

I swapped the wires so its TX-TX and RX-RX and it works

 

[aandrade]

Hi,
I have a PS5 (EMD-030) with beep an light blue 2 sec....I not found short and have voltages. The UART is:

Please any suggestions where to look?
Thnks!!!!

 

[stetofix]

Hi,
I have a PS5 (EMD-030) with beep an light blue 2 sec....I not found short and have voltages. The UART is:
View attachment 486620

Please any suggestions where to look?
Thnks!!!!

8006xxxx = SoC GFX VRM power failure (6 phases)

I would check the vrm chips under the blue thermal putty and compare the surrounding components of each vrm chip with the other ones.

 

[aandrade]

8006xxxx = SoC GFX VRM power failure (6 phases)

I would check the vrm chips under the blue thermal putty and compare the surrounding components of each vrm chip with the other ones.

Hi @stetofix
I am checking the VCORE sector and in the 6 coils I have 0v in power on when I think it should have approximately 0.8v. The 12v are present. Is there another IC that generates those 0.8v or is that solved by the same mosfets that are there?
Thks

 

[stetofix]

All six VRMs are generating the voltage parallel. The load on this VRMs variates depending on the power the APU needs.
Surounding each VRMs and on the backside are caps and resistors. I would compare them from VRM to VRM. Maybe you can measure a differnce and pin point a defect VRM.