PS5 Exploit Guide

TJackson · Tuesday at 9:38 PM

Blythe93 said:
You can use 127.0.0.1 for DNS initially, then use nanoDNS in order to get Internet access on your jailbroken PS5 while still blocking the Sony servers. That's what I use in my payload manager anyway.

Thank you for your reply, I will therefore keep my current configuration.

Another question: I have a Stealth 600 Gen 2 headset for Xbox. Even with the dongle, I can't get it to work via Bluetooth on PS5. Do you know of a payload that would work?

I already have a payload to play with a Series X controller, I'm just missing something for the headset.

Blythe93 · Tuesday at 9:47 PM

TJackson said:
Do you know of a payload that would work?

Unfortunately, I'm not familiar with that. Sorry. ^^"

Kimberly_g · Tuesday at 10:30 PM

TJackson said:
Another question: I have a Stealth 600 Gen 2 headset for Xbox. Even with the dongle, I can't get it to work via Bluetooth on PS5. Do you know of a payload that would work?

yes this is possible using GhostToothAPI by StonedModder, so all thanks go to him!

_iggyman_ · Tuesday at 10:56 PM

CapKong · Tuesday at 11:10 PM

Did anyone get the EglantinePS5 emu to work with switch 2 games? I tried 3 different games (MarioKart, DonkeyKong, Mario Tennis). Mariokart and DK starts but after 2min loading it closes back to the emu menu. I used https://github.com/smarkyie/NSP-Box/releases/tag/v2.0.0 to convert base/update dumps to xci.

iguanoPT · Tuesday at 11:14 PM

AlbertStreet said:
Ugh, I’ve been letting my pro sit on 13.60 waiting for news on FPKG, and apparently I didn’t take all the right precautions because I just realized I got updated to 14.20. I’m sick

Wow, how much did that paper weight cost you?

littlemisskittn · Tuesday at 11:21 PM

_iggyman_ said:
View attachment 600939

Meanwhile still no FPKG…..

AlbertStreet · Tuesday at 11:47 PM

iguanoPT said:
Wow, how much did that paper weight cost you?

I bought it years ago at the original price (actually even less since with my OG PS5 trade in)

AlphaBravo · 2026-11-04T00:03:08+0000

Didn't want to wait any longer for mihawk and playden to mature so I just went ahead and installed Linux (Bazzite-deck).
Got off immediately to a bad start. Couldn't even take off the ps5 side panel to access the internal m.2 slot. Almost gave up after 10mins

.
Followed a guide but of course with any setups involving scripts or commands, something always goes wrong.
4hrs later, with a few hard kernel panics and black screens, I finally loaded into the Bazzite game mode screen. Even then I couldn't go anywhere because you need a Steam Account to access desktop mode.
10 more mins later and I now have my own steam account

Haven't had a chance to test any games yet because I have one last issue. I can not access the cmdline.txt that is in efmi boot partition on usb stick. I made the Linux image bootable via Rufus in a windows 10 environment.
Tried using diskpart to set a drive letter but no luck. Without drive letter I can not access the usb stick that contains the cmdline.txt.

Just wondering if anyone happens to know what needs doing? Weird as I resolved other issues that were more complicated.

Adamos_22 · 2026-11-04T06:19:39+0000

CapKong said:
Did anyone get the EglantinePS5 emu to work with switch 2 games? I tried 3 different games (MarioKart, DonkeyKong, Mario Tennis). Mariokart and DK starts but after 2min loading it closes back to the emu menu. I used https://github.com/smarkyie/NSP-Box/releases/tag/v2.0.0 to convert base/update dumps to xci.

for now only prokopia working on ps5.

BrivsMekis · 2026-11-04T09:44:10+0000

CapKong said:
Did anyone get the EglantinePS5 emu to work with switch 2 games? I tried 3 different games (MarioKart, DonkeyKong, Mario Tennis). Mariokart and DK starts but after 2min loading it closes back to the emu menu. I used https://github.com/smarkyie/NSP-Box/releases/tag/v2.0.0 to convert base/update dumps to xci.

no, only that poki-cack game works, I havent tried it, waiting for MKW

KiiWii · 2026-11-04T10:09:30+0000

Finally hacked my 3.20 this morning (Echos host > UMTX2 webkit > itsPLK webkit auto loader), going to mess with it a bit before updating to see what it can and cant do.

Killer Instinct Arcade Collection by Markus00095 is working well though!

schatzi24 · 2026-11-04T12:35:29+0000

HS2005 · 2026-11-04T12:47:16+0000

For those who wanted to know: https://prosperopatches.com/PPSA34579
Minimum FW: 14.20

littlemisskittn · 2026-11-04T13:39:29+0000

schatzi24 said:

Good. Now they can stop screwing around with that and focus on 13.60 stuff. As I said should be done for the longest time.

ViRGE · 2026-11-04T14:05:24+0000

HS2005 said:
For those who wanted to know: https://prosperopatches.com/PPSA34579
Minimum FW: 14.20

View attachment 601064

I haven't been keeping up with this one. Does the game come on a disc? Or is it digital only?

HS2005 · 2026-11-04T14:08:13+0000

ViRGE said:
I haven't been keeping up with this one. Does the game come on a disc? Or is it digital only?

I can't buy on physical disc ATM in stores around me. I've checked.
From what I know is that Phantom Blade zero is getting physical release on PS5 and is scheduled for 2027. Funny thing is that they advertise with a physical cover. So to be short: It's digital only ATM.

KiiWii · 2026-11-04T14:15:43+0000

Maybe I’m going mental, but not one of the emulators I’ve installed actually allows me to navigate to a directory on my USB drive… they all seem to have pre-configured paths and I can’t select my drive or see anything on it…

Also, constant KP’s from the webkit auto loader, or unplugging a USB drive… fml

HS2005 · 2026-11-04T14:24:56+0000

Something new:

GarlicTransfer

GarlicTransfer is an Electron application for downloading PS5 save containers to a PC and uploading selected saves back to a console through Sony's Data Transfer protocol. It supports local PPR oracles on a jailbroken PS5 and volunteer workers through HTOS.

This is research software. Back up your saves before using Upload. Upload can overwrite or remove console save data, and the workflow intentionally asks you to delete the original saves first.

Features

Console discovery over DDP (SRCH) with firmware display.
Per-console profiles keyed by host ID; each profile has separate metadata, manifests, and saves.
Offline PS4/PS5 title names from PlayStation-Titles.
A persistent console-to-PC session: browse once, then download one or more saves without re-entering Data Transfer mode.
Single-user, multi-save upload selection using previously downloaded metadata.
Filtered upload metadata and save-only transfer behavior based on a captured working transfer.
Automatic source power signal and optional clean DisconnectPS5 reboot after downloading.
Local or volunteer PPR oracle support.

Console-to-PC downloading has been exercised on 13.60. Protocol version handling for 13.x and 14.x is implemented from live responses. Other firmware versions use the inferred major-version mapping and remain unverified.

Link: https://github.com/earthonion/GarlicTransfer/releases/tag/v0.1.2

Post automatically merged: Yesterday at 2:27 PM

KiiWii said:
Maybe I’m going mental, but not one of the emulators I’ve installed actually allows me to navigate to a directory on my USB drive… they all seem to have pre-configured paths and I can’t select my drive or see anything on it…

Also, constant KP’s from the webkit auto loader, or unplugging a USB drive… fml

FW 3.20? USB only works on 13.60 jkjk.
Not SM+ related? What are the payloads you are running... Can you access /mnt/usb0/1/2 etc. via the FTP?
Reformat USB? Use exFAT / FAT32 examples config to test.

EDIT:

v0.2.0

PS5 14.22 now works — the 0x11 rejection is fixed.

The power/approval request now includes the correct SHA-256 identity for the console owner's PSN account. Three ways to supply it: enter the decimal account ID manually, point at a PS4 USB backup folder, or use the experimental pairing flow (Windows) to capture it directly from the console.

Also: options passed via stdin instead of argv, oracle timeout bumped to 30s, disconnect after metadata browse.

Credit to @Malygos for identifying and implementing the fix (#2).

Link: https://github.com/earthonion/GarlicTransfer/releases/tag/v0.2.0

KiiWii · 2026-11-04T14:32:42+0000

HS2005 said:
FW 3.20? USB only works on 13.60 jkjk.
Not SM+ related? What are the payloads you are running... Can you access /mnt/usb0/1/2 etc. via the FTP?
Reformat USB? Use exFAT / FAT32 examples config to test.

Yeah just discovered my drive is NTFS… FML…

It KP’s when loading the UTMX exploit before payloads even get to run.

I would say it’s 50/50 that the exploit loads and then I can run payloads. I’ve turned off the auto load in payload manager for now.

PS5 Hack Status:

Preparing Your Console:

Select Your Jailbreak:

Additional Information:

Warnings:

Archived Information

Well-Known Member

The Treasure Tracker

Well-Known Member

Well-Known Member

Member

Well-Known Member

NO GODS. NO KINGS. ONLY MAN.

New Member

Well-Known Member

Well-Known Member

Member

Editorial Team

Well-Known Member

The destroyer of worlds

NO GODS. NO KINGS. ONLY MAN.

Well-Known Member

The destroyer of worlds

Editorial Team

The destroyer of worlds

GarlicTransfer​

Features​

v0.2.0​

Editorial Team

Similar threads

Popular threads in this forum

GarlicTransfer

Features

v0.2.0