Tutorial  Updated

PS5 Exploit Guide

PS5 Hack Status:


FW Ranges:
2.XX = KEX+HV: PS4/5 backups, possible keys exploit (WK: 2.50 best / 2.7X max)
3.XX = KEX+HV+Linux: PS4/5 backups, possible keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = KEX+HV+Linux: PS4/5 backups (
WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)

6.XX = KEX: PS4/5 backups (KEX+HV+Linux: 6.02 max) (WK/BD/Y2/NF/LUA/YARPE: 6.02 for Linux / 6.50 max)
7.XX = KEX: PS4/5 backups (KEX+HV+Linux: 7.61) (
WK/BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = KEX: PS4/5 backups, no HV (WK/BD/Y2/NF/LUA/YARPE)
10.01-12.70 = KEX: PS4/5 backups, no HV (
WK/BD/Y2/NF/LUA/YARPE)
13.XX-13.60 = HV+KEX+WK (
WK/BD (13.42)/Y2/LUA/YARPE)
14.XX = No KEX/HV. UL ONLY (LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: P2JB can take over an hour to exploit on FW up to 12.70.


Hypervisor (HV):
Highest released HV: 7.61
Highest unreleased HV: 14.10 (SlopVisor)
*unreleased/unimplemented


Kernel (KEX):
Highest released KEX:
13.60 (ReLapse)
Highest unreleased KEX: 13.60 (SlopSploit)
UMTX2:
1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Relapse: 7.00-13.60
Poopsploit:
4.03-12.00 (*BD to 12.00)
P2JB: 9.00-12.70 (*WK: Lapse to 10.01 / P2JB to 12.70)

Userland (UL):
Webkit: 1.00-5.50 (PSFREE +UMTX2) / 7.00-13.60 (RELAPSE) (Recommended)
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-13.42 (BD exploit + UMTX2: 7.61 / BD-JB5 + Poops to 12.00)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)
REDIS: 1.00-5.50 (Jordy's untethered JB on boot)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console at bare minimum.
NOTE 2: Consoles 7.00-13.60 should now use WebKit and RELAPSE (Recommended)


Useful Applications:
FPKG: 3.00-11.60 (KStuff Lite) / 12.XX-13.60 (KStuff-NG SOON)
Kstuff Lite: 3.00-12.70
HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-13.60 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX
HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART:
HERE
Linux: (OG: 3.00-7.61, Slim: 7.61) HERE
Kldload (wip): 3.00-6.50 HERE
PSN access: NEVER
Latest OFW: 14.10 (01/10/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list:
HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:


It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.


dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
62.210.38.117 - User Guide = ES7in1
or
45.56.67.85
(Leave DNS 2 blank)

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:

Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

PS5 factory mode PUP installation path:
/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:


WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:


  1. Information:
    Firmware 1.00-5.50 or 7.00-13.60 is required for the webkit exploit.

    Enabling web browser:
    Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.

    Exploiting 1.00-5.50:
    Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > click “Jailbreak" or wait for it to complete.

    Exploiting 7.00-13.60:

    https://ntfargo.github.io/Relapse-Exploit/

    https://zecoxao.github.io/bagagwa/

    https://soniciso1.github.io/poopicker/

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  2. Important:
    You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-13.42 to run this exploit.


    Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61

    Exploiting: 1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.

    2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.

    ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  3. Important:
    LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Your PS5 console must be activated to use save copying for PS4 games.
    1. Insert your game disc and, as soon as possible, make a save file within it.
    2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
    3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
    4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
    5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
    6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
    7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
    8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
    9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
    10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
    11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
    12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
    13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
    14. Load LUA game again, and you should see the LUA LOADER screen.
    15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
    (NOTE: Some games require manual loading of save game)

    On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
    On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.

    LUA Loader: HERE or HERE

    Auto LUA Loader Fork: HERE

    Compatible LUA games:
    Aerial Life (CUSA17122)
    Aibeya (CUSA17068)
    Aikagi 2 (CUSA19556)
    Aikagi Kimi to Issho ni Pack (CUSA16229)
    Aikano Yukizora no Triangle (CUSA19370)
    Boku to Nurse no Kenshuu Nisshi (CUSA12049)
    Boku to Joi no Shinsatsu Nisshi (CUSA18107)
    Fuyu Kiss (CUSA29745)
    Hamidashi Creative (CUSA27389)
    Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
    Haruoto Alice (CUSA14324)
    IxSHE Tell (CUSA17112)
    IxSHE Tell Demo (CUSA17126)
    Jinki Resurrection (CUSA25179)
    Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
    Maid-san no Iru Kurashi (CUSA18106)
    Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
    Nora Princess and Strat Cat Heart 2 (CUSA13586)
    Raspberry Cube (CUSA16074)
    Winter Guest (CUSA11977)

    WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.

    Incompatible LUA games:

    Dokyusei Remake Csver (CUSA47117)
    Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
    Kiss Trilogy (CUSA19341)
    Love Clear Demo (CUSA18109)
    Mikagami Sumika no Seifuku Katsudou (CUSA11481)
    Sen no Hatou, Arazone no Hime (CUSA09647)
    Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
    Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  4. Requirements:
    PS5 console must be on 4.30-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
    (Note: restoring a backup will factory reset your console).

    Information:
    If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.

    Preparation:
    Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
    On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
    On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    Exploiting:
    Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
    (Note: Ignore and internet connection issue warnings)

    Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.

    You can send payloads using netcat GUI to PS5's IP Address & port 9021.

    You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  5. Requirements:
    PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).

    Preparation:
    Download balenaEtcher
    Download the latest Extended Storage or M.2 Image (select your m.2's capacity)

    EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
    1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 256GB is the smallest drive you can use)

    2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
    1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)

    2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab).

    Exploiting:
    1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
    (Note: Ignore and internet connection issue warnings)

    1b, for consoles 10.20-12.70, COMING SOON.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  6. Important:
    YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Requirements:
    PS5 console must be on 4.30-10.01 to use this exploit.

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  7. Requirements:
    PS5 console must be on 4.30-12.70 to use this exploit. SWRR

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].


  8. [UPDATED]
    No longer needed if using latest WebKit (to 13.60) or BD-JB (to 13.42)!


    Important:

    This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.60, for convenience only.

    Very Important:
    This method requires your console to be jailbroken by another method first to gain access to alter the files.

    https://github.com/Gezine/BD-UN-JB

    Preparation:
    Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.

    (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)


Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:


Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03

OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50

OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00

OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00
OFW 13.xx runs PS4 games up to 13.52
OFW 14.xx runs PS4 games up to 14.00


(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)


You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:


1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: Installing legit game PKGs you do not own will never work, even if spoofed.

4: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information


 
Last edited by KiiWii,
Not sure if this is of any help to anyone but there was a game I was only able to find in fpkg format.

So I was able to extract it with https://github.com/thanhsondev/PSVIETHOA-FPKG-Builder/
and build the .exfat file with https://github.com/pearlxcore/PS5PKGTool

Took me a few hours to find out the tool that would extract the fpkg.

PS5 PKG Tool can't extract fpkg files, while it seems to have this feature, it errors out everytime.
Thanks for the tip, might come in handy in the future as some of the new dumps are FPKGs first. :)
 
  • Like
Reactions: veggav
So, do I understand correctly that you tested one game—where the folder/exFAT method (or something similar) caused issues—but the "fPKG" method worked without a hitch? :) That’s good news, because it confirms that "fPKG" method actually helps and isn't just for show.

What did you mean by "original disc"? I believe installing a game from an original disc is essentially a "PKG" installation too.
I have tested multiple games. I have just only written down one as an example. I'm a FF addict so that's one I'd like to test.
In terms of stability, speed and size (GB) fpkg rules above exfat and the other formats we have as of right now.

By original dics I mean that I own the original psyhical copy.
Post automatically merged:

🎮 PS5 Suite v7.1.5 — Complete PS5 Management Platform​

All-in-one management suite for jailbroken PS5 consoles. One app — on Windows, Linux or macOS (Android build in progress) that does everything: high-speed file transfers, game mount/launch, decrypted save backup/restore, screenshots, live hardware monitoring, PKG streaming installs, full FPKG building on the PC, memory tools, fan control, kernel log and a remote shell.

PS5 Suite — File Transfer

The project has a new name, a brand-new cross-platform UI, and it's faster than ever file transfers now hit ~280 MB/s over Ethernet thanks to a parallel chunked engine and persistent connection streaming.

What's new:
Rewritten in Avalonia one app for Windows, Linux & macOS (Android WIP)
Dual-pane PC ⇄ PS5 file browser uploads, downloads, rename/copy/move/delete, NAS/SMB support
Stream PKG installs from PC no more copying 20 GB to the console first
Games: list, launch, mount/unmount, details
Saves: decrypted mount, browse, backup/restore (decrypted + raw)
Screenshots & media browser with thumbnails
Live system monitortemps, fan, per-core CPU, RAM, power draw
Shell, filesystem search index, fan control, memory scanner, kernel log
Convert to FPKG entirely on PC — full PFS/CNT/FIH build with fake-signing
Payload self-update + GitHub update checker
Tested with etaHEN & Kstuff.

Link: https://github.com/manos555555/PS5-Suite/releases/tag/v7.1.5
 
Last edited by HS2005,
  • Like
Reactions: AlphaBravo
@Eva888 thanks for trying to help, much apreciated.
I dont want to try and change things unnecessary though.
And i dont want to do trial and error as thats not good for the hardware with constant shutdowns.
So please can someone tell me what exactly are the prerequisites for fpkg, preferably with etahen, because i simply like the easy of cheats.
so echostretch kstuff lite v1.11 is indeed capable of fpkg ? or do i need a special for fpkg prepared kstuff lite ?
Because people writing "kstuff lite dr FPKG.elf" but the official repo labels it without FPKG, so that really confusing here.
i know dr is the drakmor version, so must it be kstuff special fpkg version of drakmor or is the echostretch lite v.1.11 good enough ?

and so is shadownmount+ 1.7beta2 good for fpkg? same question as for kstuff, do i need a sprecial fpkg version or only the official release is good enough?

etahen shouldnt prevent fpkg right ? i see no reason why it should...

could it be the 007 fpkg relase is bogus ? what game in fpkg (preferaby very small) is a definitive work on a 4.03 console ?
so i can beter understand if its my payloads or the 007 fpkg.
 
I have tested multiple games. I have just only written down one as an example. I'm a FF addict so that's one I'd like to test.
In terms of stability, speed and size (GB) fpkg rules above exfat and the other formats we have as of right now.

By original dics I mean that I own the original psyhical copy.
Post automatically merged:

🎮 PS5 Suite v7.1.5 — Complete PS5 Management Platform​

All-in-one management suite for jailbroken PS5 consoles. One app — on Windows, Linux or macOS (Android build in progress) that does everything: high-speed file transfers, game mount/launch, decrypted save backup/restore, screenshots, live hardware monitoring, PKG streaming installs, full FPKG building on the PC, memory tools, fan control, kernel log and a remote shell.

PS5 Suite — File Transfer

The project has a new name, a brand-new cross-platform UI, and it's faster than ever file transfers now hit ~280 MB/s over Ethernet thanks to a parallel chunked engine and persistent connection streaming.

What's new:
Rewritten in Avalonia one app for Windows, Linux & macOS (Android WIP)
Dual-pane PC ⇄ PS5 file browser uploads, downloads, rename/copy/move/delete, NAS/SMB support
Stream PKG installs from PC no more copying 20 GB to the console first
Games: list, launch, mount/unmount, details
Saves: decrypted mount, browse, backup/restore (decrypted + raw)
Screenshots & media browser with thumbnails
Live system monitortemps, fan, per-core CPU, RAM, power draw
Shell, filesystem search index, fan control, memory scanner, kernel log
Convert to FPKG entirely on PC — full PFS/CNT/FIH build with fake-signing
Payload self-update + GitHub update checker
Tested with etaHEN & Kstuff.

Link: https://github.com/manos555555/PS5-Suite/releases/tag/v7.1.5
hi is there a way to increase game installation speed from burned blu ray disk?
 
  • Like
Reactions: solitaire4eva
@Eva888 thanks for trying to help, much apreciated.
I dont want to try and change things unnecessary though.
And i dont want to do trial and error as thats not good for the hardware with constant shutdowns.
So please can someone tell me what exactly are the prerequisites for fpkg, preferably with etahen, because i simply like the easy of cheats.
so echostretch kstuff lite v1.11 is indeed capable of fpkg ? or do i need a special for fpkg prepared kstuff lite ?
Because people writing "kstuff lite dr FPKG.elf" but the official repo labels it without FPKG, so that really confusing here.
i know dr is the drakmor version, so must it be kstuff special fpkg version of drakmor or is the echostretch lite v.1.11 good enough ?

and so is shadownmount+ 1.7beta2 good for fpkg? same question as for kstuff, do i need a sprecial fpkg version or only the official release is good enough?

etahen shouldnt prevent fpkg right ? i see no reason why it should...

could it be the 007 fpkg relase is bogus ? what game in fpkg (preferaby very small) is a definitive work on a 4.03 console ?
so i can beter understand if its my payloads or the 007 fpkg.

To add why i suspect the 007 fpkg is because its stated as backported but i dont get the usual backport message when starting the game.
How are backported fpgks to work/behave?
Must they show the usual backport message on game startup?
Or must the backport file be seperarely installed? But there was no extra file in the release zip.
 
i tried multiple images, one from the youtube video, others from a github that for the bypass but without success. Also someone from the forum send me a clone from his drive thats its from later version but again without success
We’ll give it a try tomorrow without heatsink—so for that minute or two, I'll just hope it doesn't explode.

First, we’ll check without modification to see if PS5 detects the drive (both are gen3, 2242 and 2280), and then we’ll try it with image modification. I seem to recall that for some people, PS5 detects PCIe 3 drives even without any special modification... You mentioned 8.xx—what exact firmware version do you have? I’ve seen reports of it working on firmware versions higher than 8.xx
 
To add why i suspect the 007 fpkg is because its stated as backported but i dont get the usual backport message when starting the game.
How are backported fpgks to work/behave?
Must they show the usual backport message on game startup?
Or must the backport file be seperarely installed? But there was no extra file in the release zip.

I have done only limited testing so far with fpkg on a 6.02 system. So just using latest Drakmor Kstuff + Shadowmount plus.

1) On backported games SM+ will show message when launching game.

2) That is not a guarantee game will work because on a Returnal fpkg, it froze during launch phase. I read comments and people said it worked on different fw but not for 6.xx. That includes my 6.02. Means that person who created backport made mistakes or other issue.

3) Other game I took had two fpkg files. One for the game and one for backport. I installed game first then backport file after.
Game worked fine after.

So your problem with 007 could be an issue with SM+ not launching backport message during launch OR the backport for your fw wasn't done properly so no sm+ message, frozen launch, kernel panic,etc.

I was lucky to figure out issue because people left comments on twitter. Otherwise I wouldn't know possible cause.

My next step would be to extract backport file from fpkg and see if I can fix myself but have no experience on this process and wonder if possible....
 
Last edited by AlphaBravo,
I was wrong.

FPKG of Silent Hills (P.T.) (CUSA01127) do exist, found it.
installed and it works!
Hi, how have been able to make it work? I own PT on my PS4 and wanted to make it work on my newly jailbroken PS5. I followed the steps to add CUSA01127 to the file, rebooted, but getting the "Can't start this game or app" error message. I am not sure if I got the right version of PT. Would be interested in knowing how you got there :)
 
I have done only limited testing so far with fpkg on a 6.02 system. So just using latest Drakmor Kstuff + Shadowmount plus.

1) On backported games SM+ will show message when launching game.

2) That is not a guarantee game will work because on a Returnal fpkg, it froze during launch phase. I read comments and people said it worked on different fw but not for 6.xx. That includes my 6.02. Means that person who created backport made mistakes or other issue.

3) Other game I took had two fpkg files. One for the game and one for backport. I installed game first then backport file after.
Game worked fine after.

So your problem with 007 could be an issue with SM+ not launching backport message during launch OR the backport for your fw wasn't done properly so no sm+ message, frozen launch, kernel panic,etc.

I was lucky to figure out issue because people left comments on twitter. Otherwise I wouldn't know possible cause.

My next step would be to extract backport file from fpkg and see if I can fix myself but have no experience on this process and wonder if possible....
Thats actually usefull info, thank you.
So the missing message is already suspicous enough for me to check other games/releases if fpkg generally works on my setup.
Maybe someone with 4.03 has a backported fpkg working and can give me the name of the game?

Edit: i even put the loose backport files in /data/homebrew/backports/PPSA11386/ according to readme of shadowmount+ and they still didnt get loaded.
Or has it to be PPSA11836-app ?
 
Last edited by SonGoku78,
  • Like
Reactions: AlphaBravo
I've downloaded a PS4 game but, when I try to install it on my PS5, by using Onion, it says: ´No package found´. What can I do? I`m desperate!
 
I've downloaded a PS4 game but, when I try to install it on my PS5, by using Onion, it says: ´No package found´. What can I do? I`m desperate!

Sometimes it's a simple fix. Did you format your usb drive to exfat or fat32? Are you sure it's the game your installing or a dlc update? Easy mistake to make.
Try different PS4 games to see if same issue after trying other fixes.
 
Sometimes it's a simple fix. Did you format your usb drive to exfat or fat32? Are you sure it's the game your installing or a dlc update? Easy mistake to make.
Try different PS4 games to see if same issue after trying other fixes.
Thank you for your answer.

I sent the game to the PS5 by using Filezilla so it should be alright (at least it is with the PS5 games). It is the main game but Onion says: No package found.

Can someone please help me?
 
Not sure if this is of any help to anyone but there was a game I was only able to find in fpkg format.

So I was able to extract it with https://github.com/thanhsondev/PSVIETHOA-FPKG-Builder/
and build the .exfat file with https://github.com/pearlxcore/PS5PKGTool

Took me a few hours to find out the tool that would extract the fpkg.

PS5 PKG Tool can't extract fpkg files, while it seems to have this feature, it errors out everytime.
Hello. Did the exfat version work in the end, and which fw are youbon right now please?
 
Thats actually usefull info, thank you.
So the missing message is already suspicous enough for me to check other games/releases if fpkg generally works on my setup.
Maybe someone with 4.03 has a backported fpkg working and can give me the name of the game?

Edit: i even put the loose backport files in /data/homebrew/backports/PPSA11386/ according to readme of shadowmount+ and they still didnt get loaded.
Or has it to be PPSA11836-app ?

I just load kstuff and not shadowmountplus. All backported games work and don't show a message (b/c sm+ isn loaded).
 
  • Like
Reactions: AlphaBravo
Thank you for your answer.

I sent the game to the PS5 by using Filezilla so it should be alright (at least it is with the PS5 games). It is the main game but Onion says: No package found.

Can someone please help me?
Ah you said PS4 game.

I'm not person to troubleshoot unless format is fpkg. If your using game dump or different formats,I think shadowmountplus will mount most of them. But Scan path is important for where you place game:

Pick the one relevant to you and FTP game there...
  • /data/homebrew
  • /data/etaHEN/games
  • /mnt/ext0/homebrew
  • /mnt/ext0/etaHEN/games
  • /mnt/ext1/homebrew
  • /mnt/ext1/etaHEN/games
  • /mnt/usb0/homebrew .. /mnt/usb7/homebrew
  • /mnt/usb0/etaHEN/games .. /mnt/usb7/etaHEN/games
  • /mnt/usb0 .. /mnt/usb7
  • /mnt/ext0
  • /mnt/ext1
  • /mnt/shadowmnt/pfsc (mounted PFSC container scan)
  • /mnt/shadowmnt (mounted image content scan)
Also make sure to use latest Kstuff and Shadowmountplus.
 
Thank you for your answer.

I sent the game to the PS5 by using Filezilla so it should be alright (at least it is with the PS5 games). It is the main game but Onion says: No package found.

Can someone please help me?
Just use "PS5 Upload" and your problem should be gone.
https://github.com/phantomptr/ps5upload
Filezilla is not the best for PS5
 
Thank you for your answer.

I sent the game to the PS5 by using Filezilla so it should be alright (at least it is with the PS5 games). It is the main game but Onion says: No package found.

Can someone please help me?
Just use "PS5 Upload" and your problem should be gone.
https://github.com/phantomptr/ps5upload
Filezilla is not the best for PS5
 
I just load kstuff and not shadowmountplus. All backported games work and don't show a message (b/c sm+ isn loaded).
Which kstuff? test version from Drakmor, or one from echo 1.11 lite beta? I know Drakmor created all those fpkg commits, but I'm a bit wary of using his test version.

And just a quick follow-up question: was ShadowMountPlus ever run on your console in the past?

i tried multiple images, one from the youtube video, others from a github that for the bypass but without success. Also someone from the forum send me a clone from his drive thats its from later version but again without success
Do you try this? I don't mean video, but text below it (Download & install HxD etc...)


.
 

Site & Scene News

New Hot Discussed User Submitted