- Joined
- Jul 21, 2007
- Messages
- 3,399
- Solutions
- 4
- Reaction score
- 1,086
- Trophies
- 2
- Location
- somewhere
- Website
- www.google.com
- XP
- 4,751
- Country

Pico64 HD — a low-cost, low-latency digital HDMI mod for the N64 (work in progress)
Hi all,
For the past few months I've been building my own HDMI mod for the Nintendo 64, and it's reached the point where I'm happy to show it off. It's a hobby project, it's still in development, and I'm not selling anything yet. I just want to share what it can do and hear what people think.
What it is
An internal mod that takes the N64's digital video straight from the console, before it ever becomes analogue, and outputs a clean HDMI signal with digital audio. There's no composite or S-Video stage and no analogue-to-digital conversion, so every pixel arrives exactly as the console drew it.
- Digital pixels, no analogue blur: it reads the same digital picture data that normally goes to the console's video DAC.
- Very low latency: there is no frame buffer. Lines are streamed out a few milliseconds after they come in, and the HDMI output is locked to the console's own frame timing. You're not a frame behind the console.
- Standard HDMI output: 720x480p60 for NTSC/60 Hz games and 720x576p50 for PAL games, chosen automatically. These are standard TV modes, so the TV doesn't have to cope with odd timings.
- HDMI audio: 48 kHz digital audio over the same cable, with a volume setting.
- Handles PAL consoles properly: including 60 Hz games on a PAL console, which run about 2% fast. The output adapts to that.
- Powered from the console: no external power supply and no extra boxes.
How it works (roughly)
The N64 sends its picture to the video DAC as a stream of digital pixel data. The mod listens to that bus and rebuilds each line, then sends it out over HDMI almost immediately. Only a small ring of lines is ever held in memory, never a whole frame, which is what keeps latency down to a few milliseconds.
The output timing is constantly nudged to stay in step with the console. That stops the drift, tearing and frame drops that you get with a buffer-and-convert approach.
It also listens to controller 1 (passively; it never interferes with the game), which gives you an on-screen settings menu that works in any game.
I'm keeping the exact hardware and the install points to myself for now, until the design settles.
Features right now
On-screen menu, opened with a controller button combo during any game. Settings are saved.
Low-res (240p/288p) games
- Scanlines: LINES or ALT pattern, adjustable strength (25/50/75/100%)
- DEBLUR: undoes the N64's horizontal smear on games that use it (even/odd phase setting)
- H and V shift, remembered per game resolution
Hi-res (480i/576i) games
- SCAN view (default): a stable picture with no combing, plus adjustable scan dimming (up to 100%)
- SCAN SHIFT to line the fields up per region, plus weave and bob modes for those who want them
General
- 4:3 / 16:9 aspect flag (for games with a widescreen option)
- Full or limited RGB range (for TVs that crush or lift blacks)
- Colour or greyscale
- Resolution popup when the game changes video mode
- In-game reset of the console from the menu
- Safe-boot button combo that restores default settings
- RGB status LED with configurable colours per state
- Firmware updates from a flash cart: run an updater ROM and the mod reflashes itself over the controller port. No need to open the console again.
Screenshots
All captures are straight from the HDMI output.









Still to do
- More testing across the library (especially odd video modes and hi-res games)
- Quality-of-life features: quick-toggle combos, an install self-test screen
- Tidying up the install so it's easy for others to do
Questions, game requests to test, or "does it do X?" are all welcome. If there's a game with a tricky video mode you'd like to see, let me know.
Last edited by spinal_cord,





