Hacking PS4 Linux on Slim

ecHs

Member
OP
Newcomer
Joined
Jan 16, 2018
Messages
5
Trophies
0
XP
84
Country
Germany
Hi everyone,

i have successfully started linux on my CUH-2016B slim.
In theory this should work on all models that had problems before (12xx / 20xx / 70xx) but i only have a CUH-2016B Slim with 4.05.

There is no video output yet. the problem is that the HDMI encoder chip is another model than those in the 10xx ps4 models (MN864729 vs the old MN86471A).
The code is in ps4-linux -> drivers + gpu + drm + radeon + ps4_bridge.c

as a workaround i have included DisplayLink USB Adapter support. This should work, but i have to order one to test it.

the last kernel build also includes support for docker, thats what i was hoping for initially and now i have it working :)

Here is what i have done so far:

  1. compile a ps4pro compatible kernel
    • there has been a bug on newer linux/gcc versions but other then that it was straightforward
      Code:
      # we only need latest commit from the pro branch
      $ git clone  fail0verflow + ps4-linux.git --branch=ps4pro --single-branch --depth=1
      
      # apply fix for ilog2 bug (see git:kernel:org pub + scm + linux + kernel + git + torvalds + linux.git + commit + ?id=474c90156c8dcc2fa815e6716cc9394d7930cb9c), needed to build on newer linux versions
      # just apply the attached patch
      
      # copy old kernel config over
      # linux + master + scripts + extract-ikconfig
      $ extract-ikconfig bzImage > .config
      
      # check config and build
      $ make menuconfig
      $ make
  2. include a reverse shell
    • sets eth0 to a static IP address and for the sake of simplicity i just generated some initramfs for common IPs.
    • The PS4 IP will always be .245 (e.g. for 192.168.0 it will be 192.168.0.245)
    • on your Host you have to open Port 1337 and the IP has to be .244 (you can change that inside the initframfs if you know how)
  3. directly boot from 2nd USB
    • wait 1 min after boot then mount 2nd USB ( /dev/sdb2 ) and boot (make sure your partition layout matches)

Usage
  • copy bzImage and the matching initramfs.cpio.gz to USB
  • use normal PS4 Linux Loader payload (as an exploit i used IDC and specter)
  • FOR REVERSE SHELL
    • open Port 1337 with netcat
      Code:
      nc -l -p 1337 </dev/stdin
    • once PS4 linux has started you should see a shell prompt in your terminal! :)
  • FOR USB BOOT
    • wait until the power LED turns blue with white pulses every 2 seconds.
    • insert 2nd USB drive and wait
I'm not sure if this fedora image is setup to run sshd on startup, so you may need to generate a hostkey and systemd symlink. same with networking (i setup everything static)


Download

includes Linux Kernel and initramfs for 192.168.0.X / 192.168.1.X / 192.168.2.X / 10.0.0.X networks + USB boot initramfs

Code:
# kernel v3 with DisplayLink and Docker support, reverse shell + usb initramfs' included
mega #!KhwCSQqQ!_IEUcc7BcRj3Lnwq_q5gTwJxf-S2d4A6170NclSIG60
md5 04ad99ef3f04320401628a2f8586f2ca
sha256 e0ad980a45b361f3ceab3ec92599b61e34d189d77639a427c250802b862b4041
can't post links yet


Debug


Code:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1436
    Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1436
    Flags: bus master, fast devsel, latency 0
lspci: Unable to load libkmod resources: error -12

00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1437
    Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1437
    Flags: bus master, fast devsel, latency 0
    Capabilities: [40] Secure device <?>
    Capabilities: [54] MSI: Enable+ Count=1/4 Maskable- 64bit+
    Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 9923 (prog-if 00 [VGA controller])
    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 9923
    Flags: bus master, fast devsel, latency 0
    Memory at e0000000 (64-bit, prefetchable) [size=64M]
    Memory at e4000000 (64-bit, prefetchable) [size=8M]
    I/O ports at 6000 [size=256]
    Memory at e4800000 (32-bit, non-prefetchable) [size=256K]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [270] #19

00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9921
    Subsystem: Ncipher Corp Ltd Device 00aa
    Flags: bus master, fast devsel, latency 0, IRQ 28
    Memory at e4840000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Kernel driver in use: snd_hda_intel

00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1438
    Flags: fast devsel

00:14.0 System peripheral: Sony Corporation Device 90c8
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0
    Memory at fdf8000000 (64-bit, non-prefetchable) [size=32M]
    I/O ports at 1000 [size=256]
    [virtual] Expansion ROM at fc0a0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00

00:14.1 System peripheral: Sony Corporation Device 90c9 (prog-if 01)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0, IRQ 24
    Memory at c4000000 (64-bit, non-prefetchable) [size=16K]
    [virtual] Expansion ROM at fc0b0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00
    Kernel driver in use: sky2

00:14.2 System peripheral: Sony Corporation Device 90ca (prog-if 02)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0, IRQ 29
    Memory at c8000000 (64-bit, non-prefetchable) [size=4K]
    Memory at c8001000 (32-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at fc0c0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00
    Kernel driver in use: ahci

00:14.3 System peripheral: Sony Corporation Device 90cb (prog-if 03)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0
    Memory at cc000000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at fc110000 [disabled] [size=4K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00

00:14.4 System peripheral: Sony Corporation Device 90cc (prog-if 04)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0, IRQ 1
    Memory at d0000000 (64-bit, non-prefetchable) [size=1M]
    Memory at d0100000 (64-bit, non-prefetchable) [size=32K]
    Memory at d0200000 (64-bit, non-prefetchable) [size=2M]
    [virtual] Expansion ROM at fc0d0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00
    Kernel driver in use: aeolia_pcie

00:14.5 System peripheral: Sony Corporation Device 90cd (prog-if 05)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0
    Memory at d4000000 (64-bit, non-prefetchable) [size=4K]
    Memory at d4001000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at fc0e0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00

00:14.6 System peripheral: Sony Corporation Device 90ce (prog-if 06)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0
    Memory at d8000000 (64-bit, non-prefetchable) [size=4K]
    Memory at 80000000 (64-bit, non-prefetchable) [size=1G]
    Memory at d9100000 (32-bit, non-prefetchable) [size=1M]
    Memory at d9000000 (32-bit, non-prefetchable) [size=256K]
    [virtual] Expansion ROM at fc0f0000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00

00:14.7 System peripheral: Sony Corporation Device 90cf (prog-if 07)
    Subsystem: Sony Corporation Device 90d0
    Flags: bus master, fast devsel, latency 0, IRQ 25
    Memory at dc000000 (64-bit, non-prefetchable) [size=2M]
    Memory at dc200000 (64-bit, non-prefetchable) [size=2M]
    Memory at dc400000 (64-bit, non-prefetchable) [size=2M]
    [virtual] Expansion ROM at fc100000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [160] Device Serial Number 00-00-00-00-01-00-02-00
    Kernel driver in use: xhci_aeolia

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 142e
    Flags: fast devsel

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 142f
    Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1430
    Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1431
    Flags: fast devsel
    Capabilities: [f0] Secure device <?>

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1432
    Flags: fast devsel

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1433
    Flags: fast devsel

00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1434
    Flags: fast devsel

Code:
$ cat /proc/cpuinfo
processor    : 7
vendor_id    : AuthenticAMD
cpu family    : 22
model        : 24
model name    : DG1201SLF87HW
stepping    : 1
microcode    : 0x7018002
cpu MHz        : 1594.078
cache size    : 2048 KB
physical id    : 0
siblings    : 8
core id        : 7
cpu cores    : 8
apicid        : 7
initial apicid    : 7
fpu        : yes
fpu_exception    : yes
cpuid level    : 13
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt nodeid_msr topoext perfctr_nb bpext perfctr_l2 hw_pstate proc_feedback vmmcall bmi1 xsaveopt arat npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold overflow_recov
bugs        : fxsave_leak sysret_ss_attrs null_seg
bogomips    : 3188.03
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate proc_feedback

Code:
[    0.000000] ps4: x86_ps4_early_setup: PS4 early setup
[    0.000000] Linux version 4.9.0-g9b9574f7-dirty (mp@mpxps) (gcc version 7.2.1 20171224 (GCC) ) #1 SMP PREEMPT Tue Jan 16 11:17:58 CET 2018
[    0.000000] Command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000d0340000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.1 present.
[    0.000000] DMI:  , BIOS unde Tue 10/11/2016  5:2
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0100000000 mask FF00000000 write-back
[    0.000000]   2 base 0200000000 mask FF80000000 write-back
[    0.000000]   3 base 0100000000 mask FFC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000027f000000 aka 10224M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x022e9000, 0x022e9fff] PGTABLE
[    0.000000] BRK [0x022ea000, 0x022eafff] PGTABLE
[    0.000000] BRK [0x022eb000, 0x022ebfff] PGTABLE
[    0.000000] BRK [0x022ec000, 0x022ecfff] PGTABLE
[    0.000000] BRK [0x022ed000, 0x022edfff] PGTABLE
[    0.000000] BRK [0x022ee000, 0x022eefff] PGTABLE
[    0.000000] RAMDISK: [mem 0x51c00000-0x51e06fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 SCEI  )
[    0.000000] ACPI: XSDT 0x00000000000E0088 00004C (v01 SCEI   ORBIS    20121218 INTL 20110211)
[    0.000000] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SCEI   ORBIS    20130205 INTL 20110211)
[    0.000000] ACPI: DSDT 0x00000000000E0430 00018C (v02 SCEI   ORBIS    20121002 INTL 20110211)
[    0.000000] ACPI: FACS 0x00000000000E012C 000040
[    0.000000] ACPI: FACS 0x00000000000E012C 000040
[    0.000000] ACPI: APIC 0x00000000000E0298 00006C (v02 SCEI   ORBIS    20120725 INTL 20110211)
[    0.000000] ACPI: MCFG 0x00000000000E0304 00003C (v01 SCEI   ORBIS    20120725 INTL 20110211)
[    0.000000] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F    PS4KEXEC 20161225 KEXC 20161225)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000007fff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000003fffff]
[    0.000000]   node   0: [mem 0x0000000000480000-0x000000000067ffff]
[    0.000000]   node   0: [mem 0x0000000000700000-0x000000007efe7fff]
[    0.000000]   node   0: [mem 0x000000007f000000-0x000000007fffffff]
[    0.000000]   node   0: [mem 0x0000000140000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 1830409
[    0.000000]   DMA zone: 57 pages used for memmap
[    0.000000]   DMA zone: 13 pages reserved
[    0.000000]   DMA zone: 3617 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520168 pages, LIFO batch:31
[    0.000000]   Normal zone: 20416 pages used for memmap
[    0.000000]   Normal zone: 1306624 pages, LIFO batch:31
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: No IOAPIC entries present
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xfc000000-0xffffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 34 pages/cpu @ffff88027ec00000 s100568 r8192 d30504 u262144
[    0.000000] pcpu-alloc: s100568 r8192 d30504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1801795
[    0.000000] Kernel command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 7106032K/7321636K available (10082K kernel code, 1165K rwdata, 3012K rodata, 1036K init, 2784K bss, 215604K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:4352 nr_irqs:128 0
[    0.000000] do_IRQ: 0.49 No irq handler for vector
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart8250] disabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] ps4: EMC timer started in 10255 TSC ticks
[    0.000000] ps4: Calibrated TSC frequency: 1594044800 kHz
[    0.000000] tsc: Detected 1594.045 MHz processor
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.09 BogoMIPS (lpj=6376180)
[    0.000163] pid_max: default: 32768 minimum: 301
[    0.000246] ACPI: Core revision 20160831
[    0.001292] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.001392] ACPI: setting ELCR to 0200 (from ffff)
[    0.001515] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.001615] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.002138] CPU: Physical Processor ID: 0
[    0.002201] CPU: Processor Core ID: 0
[    0.002258] mce: CPU supports 6 MCE banks
[    0.002331] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.002412] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.003117] Freeing SMP alternatives memory: 32K (ffffffff82028000 - ffffffff82030000)
[    0.003335] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.003432] smpboot: Max logical packages: 1
[    0.086857] smpboot: CPU0: AMD DG1201SLF87HW (family: 0x16, model: 0x18, stepping: 0x1)
[    0.086991] Performance Events: AMD PMU driver.
[    0.087066] ... version:                0
[    0.087127] ... bit width:              48
[    0.087188] ... generic registers:      4
[    0.087249] ... value mask:             0000ffffffffffff
[    0.087327] ... max period:             00007fffffffffff
[    0.087405] ... fixed-purpose events:   0
[    0.087465] ... event mask:             000000000000000f
[    0.127115] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.166984] x86: Booting SMP configuration:
[    0.167057] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.920934] x86: Booted up 1 node, 8 CPUs
[    0.921009] smpboot: Total of 8 processors activated (25503.33 BogoMIPS)
[    0.922694] devtmpfs: initialized
[    0.923324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.923551] prandom: seed boundary self test passed
[    0.924785] prandom: 100 self tests passed
[    0.924957] NET: Registered protocol family 16
[    0.942856] cpuidle: using governor ladder
[    0.974851] cpuidle: using governor menu
[    0.975298] ACPI: bus type PCI registered
[    0.975483] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.975622] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.975736] PCI: Using configuration type 1 for base access
[    1.007367] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.007963] ACPI: Added _OSI(Module Device)
[    1.008029] ACPI: Added _OSI(Processor Device)
[    1.008096] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.008166] ACPI: Added _OSI(Processor Aggregator Device)
[    1.008350] ACPI: SCI (IRQ9) allocation failed
[    1.008420] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20160831/evevent-131)
[    1.008582] ACPI: Unable to start the ACPI Interpreter
[    1.008659] ACPI Error: Could not remove SCI handler (20160831/evmisc-281)
[    1.017200] vgaarb: loaded
[    1.017405] SCSI subsystem initialized
[    1.017499] libata version 3.00 loaded.
[    1.017621] usbcore: registered new interface driver usbfs
[    1.017727] usbcore: registered new interface driver hub
[    1.017873] usbcore: registered new device driver usb
[    1.018104] Advanced Linux Sound Architecture Driver Initialized.
[    1.018210] PCI: Probing PCI hardware
[    1.018268] PCI: root bus 00: using default resources
[    1.018271] PCI: Probing PCI hardware (bus 00)
[    1.018327] PCI host bridge to bus 0000:00
[    1.018395] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.018486] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[    1.018588] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.018717] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000
[    1.018820] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600
[    1.018929] pci 0000:00:01.0: [1002:9923] type 00 class 0x030000
[    1.018942] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref]
[    1.018951] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref]
[    1.018957] pci 0000:00:01.0: reg 0x20: [io  0x6000-0x60ff]
[    1.018964] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff]
[    1.018970] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    1.018995] pci 0000:00:01.0: supports D1 D2
[    1.018997] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    1.019048] vgaarb: setting as boot device: PCI:0000:00:01.0
[    1.019134] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    1.019277] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300
[    1.019289] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit]
[    1.019328] pci 0000:00:01.1: supports D1 D2
[    1.019400] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000
[    1.019509] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000
[    1.019525] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit]
[    1.019533] pci 0000:00:14.0: reg 0x18: [io  0x1000-0x10ff]
[    1.019558] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.019597] pci 0000:00:14.0: supports D1
[    1.019600] pci 0000:00:14.0: PME# supported from D0 D1 D3hot
[    1.019680] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001
[    1.019696] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit]
[    1.019727] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.019761] pci 0000:00:14.1: supports D1
[    1.019764] pci 0000:00:14.1: PME# supported from D0 D1 D3hot
[    1.019843] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002
[    1.019858] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit]
[    1.019883] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff]
[    1.019891] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.019925] pci 0000:00:14.2: supports D1
[    1.019928] pci 0000:00:14.2: PME# supported from D0 D1 D3hot
[    1.020007] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003
[    1.020022] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit]
[    1.020052] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref]
[    1.020087] pci 0000:00:14.3: supports D1
[    1.020089] pci 0000:00:14.3: PME# supported from D0 D1 D3hot
[    1.020168] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004
[    1.020183] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit]
[    1.020195] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit]
[    1.020206] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit]
[    1.020214] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.020248] pci 0000:00:14.4: supports D1
[    1.020251] pci 0000:00:14.4: PME# supported from D0 D1 D3hot
[    1.020329] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005
[    1.020344] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit]
[    1.020356] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit]
[    1.020375] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.020409] pci 0000:00:14.5: supports D1
[    1.020412] pci 0000:00:14.5: PME# supported from D0 D1 D3hot
[    1.020490] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006
[    1.020506] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit]
[    1.020517] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit]
[    1.020525] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff]
[    1.020533] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff]
[    1.020542] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.020576] pci 0000:00:14.6: supports D1
[    1.020578] pci 0000:00:14.6: PME# supported from D0 D1 D3hot
[    1.020657] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007
[    1.020672] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[    1.020683] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit]
[    1.020695] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit]
[    1.020703] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.020737] pci 0000:00:14.7: supports D1
[    1.020740] pci 0000:00:14.7: PME# supported from D0 D1 D3hot
[    1.020841] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000
[    1.020927] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000
[    1.021013] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000
[    1.021097] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000
[    1.021186] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000
[    1.021268] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000
[    1.021350] pci 0000:00:18.6: [1022:1434] type 00 class 0x060000
[    1.021436] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.022963] PCI: pci_cache_line_size set to 64 bytes
[    1.023000] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff]
[    1.023003] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[    1.023005] e820: reserve RAM buffer [mem 0x00680000-0x006fffff]
[    1.023006] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff]
[    1.023008] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    1.023218] Bluetooth: Core ver 2.22
[    1.023290] NET: Registered protocol family 31
[    1.023358] Bluetooth: HCI device and connection manager initialized
[    1.023453] Bluetooth: HCI socket layer initialized
[    1.023527] Bluetooth: L2CAP socket layer initialized
[    1.023608] Bluetooth: SCO socket layer initialized
[    1.024065] clocksource: Switched to clocksource refined-jiffies
[    1.036234] pnp: PnP ACPI: disabled
[    1.040424] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref]
[    1.040539] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref]
[    1.040650] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref]
[    1.040760] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref]
[    1.040879] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref]
[    1.040990] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref]
[    1.041100] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref]
[    1.041209] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref]
[    1.041319] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref]
[    1.041434] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    1.041437] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[    1.041487] NET: Registered protocol family 2
[    1.041791] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.042148] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.042501] TCP: Hash tables configured (established 65536 bind 65536)
[    1.042644] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.042775] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.042991] NET: Registered protocol family 1
[    1.043337] RPC: Registered named UNIX socket transport module.
[    1.043425] RPC: Registered udp transport module.
[    1.043495] RPC: Registered tcp transport module.
[    1.043564] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.043679] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.043808] PCI: CLS mismatch (64 != 512), using 64 bytes
[    1.043945] Trying to unpack rootfs image as initramfs...
[    1.102266] Freeing initrd memory: 2076K (ffff880051c00000 - ffff880051e07000)
[    1.102487] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.102953] iommu: Adding device 0000:00:14.0 to group 0
[    1.103058] iommu: Adding device 0000:00:14.1 to group 0
[    1.103160] iommu: Adding device 0000:00:14.2 to group 0
[    1.103261] iommu: Adding device 0000:00:14.3 to group 0
[    1.103364] iommu: Adding device 0000:00:14.4 to group 0
[    1.103465] iommu: Adding device 0000:00:14.5 to group 0
[    1.103566] iommu: Adding device 0000:00:14.6 to group 0
[    1.103667] iommu: Adding device 0000:00:14.7 to group 0
[    1.103753] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.103831] AMD-Vi: Extended features (0x840):
[    1.103898]  IA
[    1.103933] AMD-Vi: Interrupt remapping enabled
[    1.104229] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.107484] perf: AMD NB counters detected
[    1.107554] perf: AMD L2I counters detected
[    1.108061] LVT offset 0 assigned for vector 0x400
[    1.108319] perf: AMD IBS detected (0x000000ff)
[    1.108650] kvm: Nested Virtualization enabled
[    1.108721] kvm: Nested Paging enabled
[    1.109083] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.110115] Scanning for low memory corruption every 60 seconds
[    1.115474] AVX2 or AES-NI instructions are not detected.
[    1.115554] AVX2 instructions are not detected.
[    1.116127] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.116265] audit: initializing netlink subsys (disabled)
[    1.116362] audit: type=2000 audit(1.028:1): initialized
[    1.116952] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    1.120488] SLUB: Unable to add boot slab alias Acpi-Parse to sysfs
[    1.122019] fuse init (API version 7.26)
[    1.125555] NET: Registered protocol family 38
[    1.125697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.125809] io scheduler noop registered
[    1.125869] io scheduler deadline registered
[    1.125995] io scheduler cfq registered (default)
[    1.126416] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.126534] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.160601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.161443] Non-volatile memory driver v1.3
[    1.161588] Linux agpgart interface v0.103
[    1.161792] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[    1.161881] AMD IOMMUv2 functionality not available on this system
[    1.162017] [drm] Initialized
[    1.162122] [drm] radeon kernel modesetting enabled.
[    1.168905] brd: module loaded
[    1.171617] loop: module loaded
[    1.171890] aeolia_pcie 0000:00:14.4: apcie_probe()
[    1.171977] aeolia_pcie 0000:00:14.4: apcie glue probe
[    1.172061] aeolia_pcie 0000:00:14.4: Aeolia chip revision: a8811120:ce809ee7:01000200
[    1.172186] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain
[    1.172193] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23)
[    1.172486] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 1, 0x400, ffffc90000003d38)
[    1.172490] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 2, 0x401, ffffc90000003d38)
[    1.172492] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 3, 0x402, ffffc90000003d38)
[    1.172495] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 4, 0x403, ffffc90000003d38)
[    1.172497] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 5, 0x404, ffffc90000003d38)
[    1.172500] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 6, 0x405, ffffc90000003d38)
[    1.172502] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 7, 0x406, ffffc90000003d38)
[    1.172504] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 8, 0x407, ffffc90000003d38)
[    1.172507] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 9, 0x408, ffffc90000003d38)
[    1.172509] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 10, 0x409, ffffc90000003d38)
[    1.172511] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 11, 0x40a, ffffc90000003d38)
[    1.172514] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 12, 0x40b, ffffc90000003d38)
[    1.172516] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 13, 0x40c, ffffc90000003d38)
[    1.172518] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 14, 0x40d, ffffc90000003d38)
[    1.172520] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 15, 0x40e, ffffc90000003d38)
[    1.172523] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 16, 0x40f, ffffc90000003d38)
[    1.172525] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 17, 0x410, ffffc90000003d38)
[    1.172527] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 18, 0x411, ffffc90000003d38)
[    1.172530] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 19, 0x412, ffffc90000003d38)
[    1.172532] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 20, 0x413, ffffc90000003d38)
[    1.172534] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 21, 0x414, ffffc90000003d38)
[    1.172536] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 22, 0x415, ffffc90000003d38)
[    1.172539] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 23, 0x416, ffffc90000003d38)
[    1.172559] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23
[    1.172561] aeolia_pcie 0000:00:14.4: dev->irq=1
[    1.172761] console [ttyS0] disabled
[    1.172888] 0000:00:14.4: ttyS0 at MMIO 0xd0340000 (irq = 20, base_baud = 3656250) is a XScale
[    1.172921] console [ttyS0] enabled
[    1.176681] 0000:00:14.4: ttyS1 at MMIO 0xd0341000 (irq = 21, base_baud = 3656250) is a XScale
[    1.185488] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 ffff880274cd0000
[    1.185492] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3)
[    1.185641] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0
[    1.229012] ret=46, reply 00 00 02 00 00 00 15 00
[    1.239050] ret=20, reply 00 00 01 01 10 00 00 00
[    1.249014] ret=20, reply 00 00 00 00 00 00 00 00
[    1.254134] sky2: driver version 1.30
[    1.257938] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1
[    1.264038] sky2 0000:00:14.1: apcie_assign_irqs(1)
[    1.264071] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 24, 0x100, ffffc90000003cf8)
[    1.264083] sky2 0000:00:14.1: apcie_assign_irqs returning 1
[    1.264095] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff880274cd0000
[    1.264099] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[    1.264381] sky2 0000:00:14.1 eth0: addr bc:60:a7:90:48:a6
[    1.269990] usbcore: registered new interface driver usb8xxx
[    1.275824] usbcore: registered new interface driver lbtf_usb
[    1.281671] usbcore: registered new interface driver asix
[    1.287131] usbcore: registered new interface driver ax88179_178a
[    1.293512] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3)
[    1.293559] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 25, 0x700, ffffc90000003d18)
[    1.293562] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 26, 0x701, ffffc90000003d18)
[    1.293564] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 27, 0x702, ffffc90000003d18)
[    1.293569] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3
[    1.293572] xhci_aeolia_probe_one 0
[    1.297111] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.302749] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1
[    1.310589] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x02010010
[    1.319376] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 ffff880274cd0000
[    1.319379] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24)
[    1.319400] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000
[    1.325445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.332293] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.339578] usb usb1: Product: xHCI Host Controller
[    1.344496] usb usb1: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.351248] usb usb1: SerialNumber: 0000:00:14.7
[    1.356129] hub 1-0:1.0: USB hub found
[    1.359918] hub 1-0:1.0: 2 ports detected
[    1.364124] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.369740] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2
[    1.377499] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.385698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.392545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.399826] usb usb2: Product: xHCI Host Controller
[    1.404742] usb usb2: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.411495] usb usb2: SerialNumber: 0000:00:14.7
[    1.416356] hub 2-0:1.0: USB hub found
[    1.420146] hub 2-0:1.0: 2 ports detected
[    1.424355] xhci_aeolia_probe_one 2
[    1.427890] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.433514] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3
[    1.441350] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x02010010
[    1.450140] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 ffff880274cd0000
[    1.450144] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26)
[    1.450165] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000
[    1.456189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.463036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.470369] usb usb3: Product: xHCI Host Controller
[    1.475297] usb usb3: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.482054] usb usb3: SerialNumber: 0000:00:14.7
[    1.486915] hub 3-0:1.0: USB hub found
[    1.490703] hub 3-0:1.0: 1 port detected
[    1.494780] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.500393] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4
[    1.508151] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.516353] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.523202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.530534] usb usb4: Product: xHCI Host Controller
[    1.535456] usb usb4: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.542205] usb usb4: SerialNumber: 0000:00:14.7
[    1.547064] hub 4-0:1.0: USB hub found
[    1.550856] hub 4-0:1.0: 1 port detected
[    1.554978] usbcore: registered new interface driver uas
[    1.560379] usbcore: registered new interface driver usb-storage
[    1.566493] usbcore: registered new interface driver usbserial
[    1.572391] usbcore: registered new interface driver usbserial_generic
[    1.578996] usbserial: USB Serial support registered for generic
[    1.585065] usbcore: registered new interface driver cp210x
[    1.590706] usbserial: USB Serial support registered for cp210x
[    1.596736] usbcore: registered new interface driver ftdi_sio
[    1.602547] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.609988] usbcore: registered new interface driver pl2303
[    1.615627] usbserial: USB Serial support registered for pl2303
[    1.621619] usbcore: registered new interface driver usb_serial_simple
[    1.628221] usbserial: USB Serial support registered for carelink
[    1.634395] usbserial: USB Serial support registered for zio
[    1.640150] usbserial: USB Serial support registered for funsoft
[    1.646276] usbserial: USB Serial support registered for flashloader
[    1.652703] usbserial: USB Serial support registered for google
[    1.658681] usbserial: USB Serial support registered for vivopay
[    1.664775] usbserial: USB Serial support registered for moto_modem
[    1.671149] usbserial: USB Serial support registered for novatel_gps
[    1.677577] usbserial: USB Serial support registered for hp4x
[    1.683380] usbserial: USB Serial support registered for suunto
[    1.689370] usbserial: USB Serial support registered for siemens_mpi
[    1.695927] mousedev: PS/2 mouse device common for all mice
[    1.701640] usbcore: registered new interface driver xpad
[    1.707221] i2c /dev entries driver
[    1.710917] Bluetooth: HCI UART driver ver 2.3
[    1.715425] usbcore: registered new interface driver btusb
[    1.721080] hidraw: raw HID events driver (C) Jiri Kosina
[    1.726647] usbcore: registered new interface driver usbhid
[    1.732268] usbhid: USB HID core driver
[    1.736432] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq
[    1.745682] usbcore: registered new interface driver snd-usb-audio
[    1.752306] NET: Registered protocol family 10
[    1.757765] NET: Registered protocol family 17
[    1.762258] lib80211: common routines for IEEE802.11 drivers
[    1.767972] lib80211_crypt: registered algorithm 'NULL'
[    1.767983] Key type dns_resolver registered
[    1.768868] usb 2-1: new SuperSpeed USB device number 2 using xhci_aeolia
[    1.779925] microcode: CPU0: patch_level=0x07018002
[    1.780429] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[    1.780559] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[    1.803977] microcode: CPU1: patch_level=0x07018002
[    1.808897] microcode: CPU2: patch_level=0x07018002
[    1.813832] microcode: CPU3: patch_level=0x07018002
[    1.818771] microcode: CPU4: patch_level=0x07018002
[    1.823696] microcode: CPU5: patch_level=0x07018002
[    1.823952] usb 2-1: New USB device found, idVendor=0781, idProduct=5583
[    1.823956] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.823959] usb 2-1: Product: Ultra Fit
[    1.823961] usb 2-1: Manufacturer: SanDisk
[    1.823963] usb 2-1: SerialNumber: 4C531001570212112422
[    1.824428] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.824647] scsi host0: usb-storage 2-1:1.0
[    1.836889] usb usb3-port1: over-current condition
[    1.870979] microcode: CPU6: patch_level=0x07018002
[    1.875917] microcode: CPU7: patch_level=0x07018002
[    1.880934] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[    1.889805] AVX version of gcm_enc/dec engaged.
[    1.894377] AES CTR mode by8 optimization enabled
[    1.900413] registered taskstats version 1
[    1.904809] ahci 0000:00:14.2: version 3.0
[    1.904861] ahci 0000:00:14.2: apcie_assign_irqs(1)
[    1.904894] apcie_msi_init(ffff8802763a7100, ffffffff81eb3be0, 29, 0x200, ffffc9000260fc28)
[    1.904907] ahci 0000:00:14.2: apcie_assign_irqs returning 1
[    1.904931] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode
[    1.908878] usb usb4-port1: over-current condition
[    1.918189] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.926429] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=29 hwirq=0x200 ffff880274cd0000
[    1.926433] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001b (27)
[    1.926778] scsi host1: ahci
[    1.929805] ata1: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 29
[    1.937298] hctosys: unable to open rtc device (rtc0)
[    1.942396] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    1.950669] ALSA device list:
[    1.953659]   #0: HD-Audio Generic at 0xe4840000 irq 28
[    1.959104] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 ffff880274cd0000
[    1.959108] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19)
[    2.156840] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fa2b91895, max_idle_ns: 440795246215 ns
[    2.167000] clocksource: Switched to clocksource tsc
[    2.424835] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.431486] ata1.00: ATAPI: SONY    PS-SYSTEM   412R, 5004, max UDMA/66
[    2.438846] ata1.00: configured for UDMA/66
[    2.446962] scsi 1:0:0:0: CD-ROM            SONY     PS-SYSTEM   412R 5004 PQ: 0 ANSI: 5
[    2.470999] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[    2.478203] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.483815] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.484050] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.492034] Freeing unused kernel memory: 1036K (ffffffff81f25000 - ffffffff82028000)
[    2.499950] Write protecting the kernel read-only data: 14336k
[    2.506251] Freeing unused kernel memory: 136K (ffff8800019de000 - ffff880001a00000)
[    2.519673] Freeing unused kernel memory: 1084K (ffff880001cf1000 - ffff880001e00000)
[    2.551833] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff880274cd0000
[    2.551840] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[    2.552108] sky2 0000:00:14.1 eth0: enabling interface
[    2.552212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 
Last edited by ecHs,

goggor

New Member
Newbie
Joined
Jan 17, 2018
Messages
3
Trophies
0
Age
36
XP
45
Country
Germany
Great work!
1)
I tried to compile it from scratch like in your small tutorial. But my bzImage does not work.
The compiled version is only 6.5MB in size and not like yours 10MB.
I also did not understand your point with "
# apply fix for ilog2 bug (see SORRY_NO_LINKS_FOR_ME), needed to build on newer linux/gcc versions
# just apply the attached patch"
Maybe you have an advice for me?


2)
For the graphics not shown up and what I want to try is to change the pciadress in the kernel.
In file: include/drm/drm_pciids.h
change 0x9920 to 0x9923. (ps4pro is 0x9924)
 

ecHs

Member
OP
Newcomer
Joined
Jan 16, 2018
Messages
5
Trophies
0
XP
84
Country
Germany
How do I run these files on ps4 slim?
just as you would with the existing linux loader, maybe have a look at gbatemp.net /threads/ps4-linux-on-4-05.493069/

--------------------- MERGED ---------------------------

Great work!
1)
I tried to compile it from scratch like in your small tutorial. But my bzImage does not work.
The compiled version is only 6.5MB in size and not like yours 10MB.
I also did not understand your point with "
# apply fix for ilog2 bug (see SORRY_NO_LINKS_FOR_ME), needed to build on newer linux/gcc versions
# just apply the attached patch"
Maybe you have an advice for me?


2)
For the graphics not shown up and what I want to try is to change the pciadress in the kernel.
In file: include/drm/drm_pciids.h
change 0x9920 to 0x9923. (ps4pro is 0x9924)

1. if you do not have that error on compile you won't need the patch, otherwise you can find it here: bitly 2EMza7l

2. Thanks for the tip, i did compile a new kernel and the size is now more in line (5.5 MB). Maybe there was some crud leftover, i used make mrproper and now it fits.

New Kernel Download:
Code:
mega #!vpoQ0CKY!4jE4V9aRWrxNlecNSEGbAXKM4QFCP04J9SpFwgXK-F0
md5 9d7cf3c18e7807a679291ffd363dc7df
sha256 dd6ca032ac079c605b9d9c40fe73d8b03023028195155a5cc37d3381269a1d94

still no video output but i get more radeon related messages:

Code:
[    0.000000] Command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    0.000000] Kernel command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    1.140921] [drm] Initialized
[    1.141002] [drm] radeon kernel modesetting enabled.
[    1.774165] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9923 0x1002:0x9923 0x00).
[    1.774183] [drm] register mmio base: 0xE4800000
[    1.774184] [drm] register mmio size: 262144
[    1.774189] [drm] doorbell mmio base: 0xE4000000
[    1.774190] [drm] doorbell mmio size: 8388608
[    1.774385] [drm] Detected VRAM RAM=1024M, BAR=64M
[    1.774386] [drm] RAM width 256bits DDR
[    1.774506] [drm] radeon: 1024M of VRAM memory ready
[    1.774507] [drm] radeon: 2048M of GTT memory ready.
[    1.774520] [drm] Loading liverpool Microcode
[    1.774738] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.798956] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    1.799208] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.799209] [drm] Driver supports precise vblank timestamp query.
[    1.799320] [drm] radeon: irq initialized.
[    1.802101] [drm] ring test on 0 succeeded in 1 usecs
[    1.802176] [drm] ring test on 1 succeeded in 1 usecs
[    1.802191] [drm] ring test on 2 succeeded in 1 usecs
[    1.802381] [drm] ring test on 3 succeeded in 1 usecs
[    1.802386] [drm] ring test on 4 succeeded in 1 usecs
[    1.825827] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.912805] [drm] Radeon Display Connectors
[    2.912808] [drm] Connector 0:
[    2.912810] [drm]   HDMI-A-1
[    2.912811] [drm]   HPD1
[    2.912814] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.912814] [drm]   Encoders:
[    2.912816] [drm]     DFP1: INTERNAL_UNIPHY
[    2.948738] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.949279] [drm] fb mappable at 0xE0454000
[    2.949280] [drm] vram apper at 0xE0000000
[    2.949282] [drm] size 3145728
[    2.949283] [drm] fb depth is 24
[    2.949284] [drm]    pitch is 4096
[    2.984553] fbcon: radeondrmfb (fb0) is primary device
[    3.016254] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    3.036806] [drm] Initialized radeon 2.48.0 20080528 for 0000:00:01.0 on minor 0
 
Last edited by ecHs,

ecHs

Member
OP
Newcomer
Joined
Jan 16, 2018
Messages
5
Trophies
0
XP
84
Country
Germany
That's looking good! Could you provide the full dmesg please?
Thanks.
i managed to directly boot into fedora. currently i'm trying to recompile drm/mesa/xorg drivers using the ps4-radeon-patches.
here is the latest dmesg output:
Code:
[    0.000000] ps4: x86_ps4_early_setup: PS4 early setup
[    0.000000] Linux version 4.9.0-g9b9574f7-dirty (mp@mpxps) (gcc version 7.2.1 20171224 (GCC) ) #1 SMP PREEMPT Wed Jan 17 11:25:55 CET 2018
[    0.000000] Command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000d0340000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.1 present.
[    0.000000] DMI:  , BIOS unde Tue 10/11/2016  5:2
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0100000000 mask FF00000000 write-back
[    0.000000]   2 base 0200000000 mask FF80000000 write-back
[    0.000000]   3 base 0100000000 mask FFC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000027f000000 aka 10224M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x022e9000, 0x022e9fff] PGTABLE
[    0.000000] BRK [0x022ea000, 0x022eafff] PGTABLE
[    0.000000] BRK [0x022eb000, 0x022ebfff] PGTABLE
[    0.000000] BRK [0x022ec000, 0x022ecfff] PGTABLE
[    0.000000] BRK [0x022ed000, 0x022edfff] PGTABLE
[    0.000000] BRK [0x022ee000, 0x022eefff] PGTABLE
[    0.000000] RAMDISK: [mem 0x4dc00000-0x4de06fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 SCEI  )
[    0.000000] ACPI: XSDT 0x00000000000E0088 00004C (v01 SCEI   ORBIS    20121218 INTL 20110211)
[    0.000000] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SCEI   ORBIS    20130205 INTL 20110211)
[    0.000000] ACPI: DSDT 0x00000000000E0430 00018C (v02 SCEI   ORBIS    20121002 INTL 20110211)
[    0.000000] ACPI: FACS 0x00000000000E012C 000040
[    0.000000] ACPI: FACS 0x00000000000E012C 000040
[    0.000000] ACPI: APIC 0x00000000000E0298 00006C (v02 SCEI   ORBIS    20120725 INTL 20110211)
[    0.000000] ACPI: MCFG 0x00000000000E0304 00003C (v01 SCEI   ORBIS    20120725 INTL 20110211)
[    0.000000] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F    PS4KEXEC 20161225 KEXC 20161225)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000007fff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000003fffff]
[    0.000000]   node   0: [mem 0x0000000000480000-0x000000000067ffff]
[    0.000000]   node   0: [mem 0x0000000000700000-0x000000007efe7fff]
[    0.000000]   node   0: [mem 0x000000007f000000-0x000000007fffffff]
[    0.000000]   node   0: [mem 0x0000000140000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 1830409
[    0.000000]   DMA zone: 57 pages used for memmap
[    0.000000]   DMA zone: 13 pages reserved
[    0.000000]   DMA zone: 3617 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520168 pages, LIFO batch:31
[    0.000000]   Normal zone: 20416 pages used for memmap
[    0.000000]   Normal zone: 1306624 pages, LIFO batch:31
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: No IOAPIC entries present
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xfc000000-0xffffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 34 pages/cpu @ffff88027ec00000 s100568 r8192 d30504 u262144
[    0.000000] pcpu-alloc: s100568 r8192 d30504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1801795
[    0.000000] Kernel command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 7106032K/7321636K available (10082K kernel code, 1165K rwdata, 3012K rodata, 1036K init, 2784K bss, 215604K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:4352 nr_irqs:128 0
[    0.000000] do_IRQ: 0.49 No irq handler for vector
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart8250] disabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] ps4: EMC timer started in 10126 TSC ticks
[    0.000000] ps4: Calibrated TSC frequency: 1594077984 kHz
[    0.000000] tsc: Detected 1594.078 MHz processor
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.15 BogoMIPS (lpj=6376312)
[    0.000161] pid_max: default: 32768 minimum: 301
[    0.000243] ACPI: Core revision 20160831
[    0.001299] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.001398] ACPI: setting ELCR to 0200 (from ffff)
[    0.001520] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.001619] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.002141] CPU: Physical Processor ID: 0
[    0.002203] CPU: Processor Core ID: 0
[    0.002260] mce: CPU supports 6 MCE banks
[    0.002333] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.002413] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.003119] Freeing SMP alternatives memory: 32K (ffffffff82028000 - ffffffff82030000)
[    0.003335] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.003431] smpboot: Max logical packages: 1
[    0.086842] smpboot: CPU0: AMD DG1201SLF87HW (family: 0x16, model: 0x18, stepping: 0x1)
[    0.086975] Performance Events: AMD PMU driver.
[    0.087049] ... version:                0
[    0.087109] ... bit width:              48
[    0.087170] ... generic registers:      4
[    0.087231] ... value mask:             0000ffffffffffff
[    0.087308] ... max period:             00007fffffffffff
[    0.087384] ... fixed-purpose events:   0
[    0.087444] ... event mask:             000000000000000f
[    0.127100] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.166971] x86: Booting SMP configuration:
[    0.167044] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.920936] x86: Booted up 1 node, 8 CPUs
[    0.921010] smpboot: Total of 8 processors activated (25504.31 BogoMIPS)
[    0.922697] devtmpfs: initialized
[    0.923321] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.923550] prandom: seed boundary self test passed
[    0.924783] prandom: 100 self tests passed
[    0.924958] NET: Registered protocol family 16
[    0.942858] cpuidle: using governor ladder
[    0.958858] cpuidle: using governor menu
[    0.959318] ACPI: bus type PCI registered
[    0.959497] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.959635] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.959746] PCI: Using configuration type 1 for base access
[    0.991262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.991816] ACPI: Added _OSI(Module Device)
[    0.991882] ACPI: Added _OSI(Processor Device)
[    0.991948] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.992018] ACPI: Added _OSI(Processor Aggregator Device)
[    0.992203] ACPI: SCI (IRQ9) allocation failed
[    0.992272] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20160831/evevent-131)
[    0.992432] ACPI: Unable to start the ACPI Interpreter
[    0.992508] ACPI Error: Could not remove SCI handler (20160831/evmisc-281)
[    0.992985] vgaarb: loaded
[    0.993181] SCSI subsystem initialized
[    0.993273] libata version 3.00 loaded.
[    0.993397] usbcore: registered new interface driver usbfs
[    0.993503] usbcore: registered new interface driver hub
[    0.993637] usbcore: registered new device driver usb
[    0.993869] Advanced Linux Sound Architecture Driver Initialized.
[    0.993974] PCI: Probing PCI hardware
[    0.994032] PCI: root bus 00: using default resources
[    0.994034] PCI: Probing PCI hardware (bus 00)
[    0.994090] PCI host bridge to bus 0000:00
[    0.994158] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.994248] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[    0.994349] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.994477] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000
[    0.994578] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600
[    0.994687] pci 0000:00:01.0: [1002:9923] type 00 class 0x030000
[    0.994700] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref]
[    0.994709] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref]
[    0.994715] pci 0000:00:01.0: reg 0x20: [io  0x6000-0x60ff]
[    0.994722] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff]
[    0.994728] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.994753] pci 0000:00:01.0: supports D1 D2
[    0.994755] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.994807] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.994892] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.995033] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300
[    0.995045] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit]
[    0.995084] pci 0000:00:01.1: supports D1 D2
[    0.995157] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000
[    0.995264] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000
[    0.995280] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit]
[    0.995289] pci 0000:00:14.0: reg 0x18: [io  0x1000-0x10ff]
[    0.995314] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.995352] pci 0000:00:14.0: supports D1
[    0.995355] pci 0000:00:14.0: PME# supported from D0 D1 D3hot
[    0.995436] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001
[    0.995451] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit]
[    0.995482] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.995516] pci 0000:00:14.1: supports D1
[    0.995519] pci 0000:00:14.1: PME# supported from D0 D1 D3hot
[    0.995598] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002
[    0.995613] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit]
[    0.995638] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff]
[    0.995646] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.995680] pci 0000:00:14.2: supports D1
[    0.995682] pci 0000:00:14.2: PME# supported from D0 D1 D3hot
[    0.995762] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003
[    0.995777] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit]
[    0.995807] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref]
[    0.995841] pci 0000:00:14.3: supports D1
[    0.995843] pci 0000:00:14.3: PME# supported from D0 D1 D3hot
[    0.995922] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004
[    0.995937] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit]
[    0.995949] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit]
[    0.995960] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit]
[    0.995968] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.996002] pci 0000:00:14.4: supports D1
[    0.996005] pci 0000:00:14.4: PME# supported from D0 D1 D3hot
[    0.996084] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005
[    0.996099] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit]
[    0.996110] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit]
[    0.996129] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.996164] pci 0000:00:14.5: supports D1
[    0.996166] pci 0000:00:14.5: PME# supported from D0 D1 D3hot
[    0.996245] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006
[    0.996260] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit]
[    0.996272] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit]
[    0.996280] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff]
[    0.996288] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff]
[    0.996296] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.996330] pci 0000:00:14.6: supports D1
[    0.996333] pci 0000:00:14.6: PME# supported from D0 D1 D3hot
[    0.996412] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007
[    0.996428] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[    0.996439] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit]
[    0.996450] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit]
[    0.996459] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.996493] pci 0000:00:14.7: supports D1
[    0.996495] pci 0000:00:14.7: PME# supported from D0 D1 D3hot
[    0.996571] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000
[    0.996659] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000
[    0.996742] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000
[    0.996853] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000
[    0.996943] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000
[    0.997027] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000
[    0.997109] pci 0000:00:18.6: [1022:1434] type 00 class 0x060000
[    0.997195] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.998724] PCI: pci_cache_line_size set to 64 bytes
[    0.998762] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff]
[    0.998765] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[    0.998767] e820: reserve RAM buffer [mem 0x00680000-0x006fffff]
[    0.998769] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff]
[    0.998771] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.998986] Bluetooth: Core ver 2.22
[    0.999056] NET: Registered protocol family 31
[    0.999123] Bluetooth: HCI device and connection manager initialized
[    0.999217] Bluetooth: HCI socket layer initialized
[    0.999290] Bluetooth: L2CAP socket layer initialized
[    0.999371] Bluetooth: SCO socket layer initialized
[    0.999782] clocksource: Switched to clocksource refined-jiffies
[    1.011940] pnp: PnP ACPI: disabled
[    1.016683] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref]
[    1.016795] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref]
[    1.016918] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref]
[    1.017028] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref]
[    1.017137] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref]
[    1.017246] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref]
[    1.017354] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref]
[    1.017463] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref]
[    1.017572] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref]
[    1.017686] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    1.017689] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[    1.017733] NET: Registered protocol family 2
[    1.018033] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.018364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.018717] TCP: Hash tables configured (established 65536 bind 65536)
[    1.018864] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.019017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.019277] NET: Registered protocol family 1
[    1.019699] RPC: Registered named UNIX socket transport module.
[    1.019786] RPC: Registered udp transport module.
[    1.019856] RPC: Registered tcp transport module.
[    1.019925] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.020039] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.020167] PCI: CLS mismatch (64 != 512), using 64 bytes
[    1.020296] Trying to unpack rootfs image as initramfs...
[    1.078565] Freeing initrd memory: 2076K (ffff88004dc00000 - ffff88004de07000)
[    1.078787] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.079237] iommu: Adding device 0000:00:14.0 to group 0
[    1.079341] iommu: Adding device 0000:00:14.1 to group 0
[    1.079442] iommu: Adding device 0000:00:14.2 to group 0
[    1.079543] iommu: Adding device 0000:00:14.3 to group 0
[    1.079643] iommu: Adding device 0000:00:14.4 to group 0
[    1.079744] iommu: Adding device 0000:00:14.5 to group 0
[    1.079846] iommu: Adding device 0000:00:14.6 to group 0
[    1.079947] iommu: Adding device 0000:00:14.7 to group 0
[    1.080032] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.080110] AMD-Vi: Extended features (0x840):
[    1.080176]  IA
[    1.080211] AMD-Vi: Interrupt remapping enabled
[    1.080480] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.083694] perf: AMD NB counters detected
[    1.083763] perf: AMD L2I counters detected
[    1.084315] LVT offset 0 assigned for vector 0x400
[    1.084590] perf: AMD IBS detected (0x000000ff)
[    1.084928] kvm: Nested Virtualization enabled
[    1.084998] kvm: Nested Paging enabled
[    1.085347] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.086497] Scanning for low memory corruption every 60 seconds
[    1.091811] AVX2 or AES-NI instructions are not detected.
[    1.091891] AVX2 instructions are not detected.
[    1.092471] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.092605] audit: initializing netlink subsys (disabled)
[    1.092702] audit: type=2000 audit(1.004:1): initialized
[    1.093304] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    1.096947] SLUB: Unable to add boot slab alias Acpi-Parse to sysfs
[    1.098315] fuse init (API version 7.26)
[    1.101865] NET: Registered protocol family 38
[    1.102005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.102116] io scheduler noop registered
[    1.102176] io scheduler deadline registered
[    1.102301] io scheduler cfq registered (default)
[    1.102590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.102686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.131349] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.132020] Non-volatile memory driver v1.3
[    1.132154] Linux agpgart interface v0.103
[    1.132294] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[    1.132382] AMD IOMMUv2 functionality not available on this system
[    1.132502] [drm] Initialized
[    1.132582] [drm] radeon kernel modesetting enabled.
[    1.138326] brd: module loaded
[    1.141132] loop: module loaded
[    1.141411] aeolia_pcie 0000:00:14.4: apcie_probe()
[    1.141472] aeolia_pcie 0000:00:14.4: apcie glue probe
[    1.141556] aeolia_pcie 0000:00:14.4: Aeolia chip revision: a8811120:ce809ee7:01000200
[    1.141679] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain
[    1.141687] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23)
[    1.141980] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 1, 0x400, ffffc90000003d38)
[    1.141983] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 2, 0x401, ffffc90000003d38)
[    1.141986] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 3, 0x402, ffffc90000003d38)
[    1.141989] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 4, 0x403, ffffc90000003d38)
[    1.141991] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 5, 0x404, ffffc90000003d38)
[    1.141993] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 6, 0x405, ffffc90000003d38)
[    1.141996] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 7, 0x406, ffffc90000003d38)
[    1.141998] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 8, 0x407, ffffc90000003d38)
[    1.142000] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 9, 0x408, ffffc90000003d38)
[    1.142003] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 10, 0x409, ffffc90000003d38)
[    1.142005] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 11, 0x40a, ffffc90000003d38)
[    1.142007] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 12, 0x40b, ffffc90000003d38)
[    1.142010] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 13, 0x40c, ffffc90000003d38)
[    1.142012] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 14, 0x40d, ffffc90000003d38)
[    1.142014] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 15, 0x40e, ffffc90000003d38)
[    1.142016] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 16, 0x40f, ffffc90000003d38)
[    1.142019] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 17, 0x410, ffffc90000003d38)
[    1.142021] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 18, 0x411, ffffc90000003d38)
[    1.142023] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 19, 0x412, ffffc90000003d38)
[    1.142026] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 20, 0x413, ffffc90000003d38)
[    1.142028] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 21, 0x414, ffffc90000003d38)
[    1.142030] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 22, 0x415, ffffc90000003d38)
[    1.142032] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 23, 0x416, ffffc90000003d38)
[    1.142049] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23
[    1.142051] aeolia_pcie 0000:00:14.4: dev->irq=1
[    1.142274] console [ttyS0] disabled
[    1.142368] 0000:00:14.4: ttyS0 at MMIO 0xd0340000 (irq = 20, base_baud = 3656250) is a XScale
[    1.142398] console [ttyS0] enabled
[    1.146197] 0000:00:14.4: ttyS1 at MMIO 0xd0341000 (irq = 21, base_baud = 3656250) is a XScale
[    1.155034] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 ffff88027563c000
[    1.155038] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3)
[    1.155189] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0
[    1.204104] ret=46, reply 00 00 02 00 00 00 15 00
[    1.214060] ret=20, reply 00 00 01 01 10 00 00 00
[    1.224100] ret=20, reply 00 00 00 00 00 00 00 00
[    1.229196] sky2: driver version 1.30
[    1.232980] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1
[    1.239093] sky2 0000:00:14.1: apcie_assign_irqs(1)
[    1.239133] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 24, 0x100, ffffc90000003cf8)
[    1.239145] sky2 0000:00:14.1: apcie_assign_irqs returning 1
[    1.239157] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff88027563c000
[    1.239161] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[    1.239450] sky2 0000:00:14.1 eth0: addr bc:60:a7:90:48:a6
[    1.245069] usbcore: registered new interface driver usb8xxx
[    1.250940] usbcore: registered new interface driver lbtf_usb
[    1.256787] usbcore: registered new interface driver asix
[    1.262261] usbcore: registered new interface driver ax88179_178a
[    1.268736] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3)
[    1.268805] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 25, 0x700, ffffc90000003d18)
[    1.268809] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 26, 0x701, ffffc90000003d18)
[    1.268812] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 27, 0x702, ffffc90000003d18)
[    1.268829] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3
[    1.268834] xhci_aeolia_probe_one 0
[    1.272399] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.278061] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1
[    1.285915] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x02010010
[    1.294701] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 ffff88027563c000
[    1.294705] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24)
[    1.294730] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000
[    1.300772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.307621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.314905] usb usb1: Product: xHCI Host Controller
[    1.319818] usb usb1: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.326576] usb usb1: SerialNumber: 0000:00:14.7
[    1.331452] hub 1-0:1.0: USB hub found
[    1.335244] hub 1-0:1.0: 2 ports detected
[    1.339445] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.345040] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2
[    1.352811] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.361016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.367858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.375143] usb usb2: Product: xHCI Host Controller
[    1.380056] usb usb2: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.386814] usb usb2: SerialNumber: 0000:00:14.7
[    1.391664] hub 2-0:1.0: USB hub found
[    1.395454] hub 2-0:1.0: 2 ports detected
[    1.399655] xhci_aeolia_probe_one 2
[    1.403187] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.408826] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3
[    1.416656] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x02010010
[    1.425439] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 ffff88027563c000
[    1.425443] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26)
[    1.425463] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000
[    1.431486] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.438326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.445610] usb usb3: Product: xHCI Host Controller
[    1.450524] usb usb3: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.457282] usb usb3: SerialNumber: 0000:00:14.7
[    1.462131] hub 3-0:1.0: USB hub found
[    1.465926] hub 3-0:1.0: 1 port detected
[    1.470001] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    1.475615] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4
[    1.483372] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.491571] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.498465] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.505754] usb usb4: Product: xHCI Host Controller
[    1.510668] usb usb4: Manufacturer: Linux 4.9.0-g9b9574f7-dirty xhci-hcd
[    1.517423] usb usb4: SerialNumber: 0000:00:14.7
[    1.522274] hub 4-0:1.0: USB hub found
[    1.526065] hub 4-0:1.0: 1 port detected
[    1.530177] usbcore: registered new interface driver uas
[    1.535580] usbcore: registered new interface driver usb-storage
[    1.541688] usbcore: registered new interface driver usbserial
[    1.547583] usbcore: registered new interface driver usbserial_generic
[    1.554233] usbserial: USB Serial support registered for generic
[    1.560309] usbcore: registered new interface driver cp210x
[    1.565951] usbserial: USB Serial support registered for cp210x
[    1.571948] usbcore: registered new interface driver ftdi_sio
[    1.577761] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.585198] usbcore: registered new interface driver pl2303
[    1.590833] usbserial: USB Serial support registered for pl2303
[    1.596824] usbcore: registered new interface driver usb_serial_simple
[    1.603414] usbserial: USB Serial support registered for carelink
[    1.609578] usbserial: USB Serial support registered for zio
[    1.615300] usbserial: USB Serial support registered for funsoft
[    1.621364] usbserial: USB Serial support registered for flashloader
[    1.627815] usbserial: USB Serial support registered for google
[    1.633805] usbserial: USB Serial support registered for vivopay
[    1.639875] usbserial: USB Serial support registered for moto_modem
[    1.646210] usbserial: USB Serial support registered for novatel_gps
[    1.652624] usbserial: USB Serial support registered for hp4x
[    1.658436] usbserial: USB Serial support registered for suunto
[    1.664415] usbserial: USB Serial support registered for siemens_mpi
[    1.671004] mousedev: PS/2 mouse device common for all mice
[    1.676729] usbcore: registered new interface driver xpad
[    1.682252] i2c /dev entries driver
[    1.685986] Bluetooth: HCI UART driver ver 2.3
[    1.690502] usbcore: registered new interface driver btusb
[    1.696171] hidraw: raw HID events driver (C) Jiri Kosina
[    1.701761] usbcore: registered new interface driver usbhid
[    1.707378] usbhid: USB HID core driver
[    1.711547] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq
[    1.720696] usbcore: registered new interface driver snd-usb-audio
[    1.727416] NET: Registered protocol family 10
[    1.732363] NET: Registered protocol family 17
[    1.736947] lib80211: common routines for IEEE802.11 drivers
[    1.742674] lib80211_crypt: registered algorithm 'NULL'
[    1.742694] Key type dns_resolver registered
[    1.747803] microcode: CPU0: patch_level=0x07018002
[    1.752780] microcode: CPU1: patch_level=0x07018002
[    1.757723] microcode: CPU2: patch_level=0x07018002
[    1.758019] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[    1.758139] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[    1.781760] microcode: CPU3: patch_level=0x07018002
[    1.786700] microcode: CPU4: patch_level=0x07018002
[    1.791621] microcode: CPU5: patch_level=0x07018002
[    1.796573] microcode: CPU6: patch_level=0x07018002
[    1.801513] microcode: CPU7: patch_level=0x07018002
[    1.806592] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[    1.815462] AVX version of gcm_enc/dec engaged.
[    1.820035] AES CTR mode by8 optimization enabled
[    1.822933] usb 2-1: new SuperSpeed USB device number 2 using xhci_aeolia
[    1.832951] registered taskstats version 1
[    1.837527] radeon 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.843762] usb 2-1: New USB device found, idVendor=0781, idProduct=5583
[    1.843766] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.843768] usb 2-1: Product: Ultra Fit
[    1.843770] usb 2-1: Manufacturer: SanDisk
[    1.843773] usb 2-1: SerialNumber: 4C531001570212112422
[    1.844242] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.844454] scsi host0: usb-storage 2-1:1.0
[    1.858876] usb usb3-port1: over-current condition
[    1.888717] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9923 0x1002:0x9923 0x00).
[    1.897508] [drm] register mmio base: 0xE4800000
[    1.898867] usb usb4-port1: over-current condition
[    1.906990] [drm] register mmio size: 262144
[    1.911296] [drm] doorbell mmio base: 0xE4000000
[    1.915947] [drm] doorbell mmio size: 8388608
[    1.920391] ATOM BIOS: 113
[    1.923234] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.932181] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    1.939902] [drm] Detected VRAM RAM=1024M, BAR=64M
[    1.944732] [drm] RAM width 256bits DDR
[    1.948827] [TTM] Zone  kernel: Available graphics memory: 3587046 kiB
[    1.955410] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.961990] [TTM] Initializing pool allocator
[    1.966389] [TTM] Initializing DMA pool allocator
[    1.971173] [drm] radeon: 1024M of VRAM memory ready
[    1.976178] [drm] radeon: 2048M of GTT memory ready.
[    1.981194] [drm] Loading liverpool Microcode
[    1.985797] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    2.007725] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    2.014765] gb_addr_config=10000000
[    2.018497] radeon 0000:00:01.0: WB enabled
[    2.022727] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88027476ac00
[    2.033605] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88027476ac04
[    2.044482] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88027476ac08
[    2.055352] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88027476ac0c
[    2.066221] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88027476ac10
[    2.077090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.083751] [drm] Driver supports precise vblank timestamp query.
[    2.089960] radeon 0000:00:01.0: radeon: using MSI.
[    2.094906] [drm] radeon: irq initialized.
[    2.101789] [drm] ring test on 0 succeeded in 1 usecs
[    2.106947] [drm] ring test on 1 succeeded in 1 usecs
[    2.112054] [drm] ring test on 2 succeeded in 1 usecs
[    2.117329] [drm] ring test on 3 succeeded in 1 usecs
[    2.122421] [drm] ring test on 4 succeeded in 1 usecs
[    2.129279] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.240813] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fa4aa1fe0, max_idle_ns: 440795257239 ns
[    2.250975] clocksource: Switched to clocksource tsc
[    2.847059] bounce: isa pool size: 16 pages
[    2.851629] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[    2.860176] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.865676] sd 0:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[    2.873680] sd 0:0:0:0: [sda] Write Protect is off
[    2.878509] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    2.878848] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.890410]  sda: sda1
[    2.894147] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.232807] [drm] Radeon Display Connectors
[    3.237035] [drm] Connector 0:
[    3.240111] [drm]   HDMI-A-1
[    3.243012] [drm]   HPD1
[    3.245558] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    3.253009] [drm]   Encoders:
[    3.255995] [drm]     DFP1: INTERNAL_UNIPHY
[    3.290315] [drm] fb mappable at 0xE0454000
[    3.294543] [drm] vram apper at 0xE0000000
[    3.298672] [drm] size 8294400
[    3.301745] [drm] fb depth is 24
[    3.304990] [drm]    pitch is 7680
[    3.308586] fbcon: radeondrmfb (fb0) is primary device
[    3.436796] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[    3.436799] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[    3.449372] random: fast init done
[   18.631859] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[   18.631869] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[   18.631872] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[   18.646670] Console: switching to colour frame buffer device 192x60
[   18.709612] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   18.731862] [drm] Initialized radeon 2.48.0 20080528 for 0000:00:01.0 on minor 0
[   18.739509] ahci 0000:00:14.2: version 3.0
[   18.739569] ahci 0000:00:14.2: apcie_assign_irqs(1)
[   18.739608] apcie_msi_init(ffff8802755d5e00, ffffffff81eb3be0, 30, 0x200, ffffc90000207c28)
[   18.739616] ahci 0000:00:14.2: apcie_assign_irqs returning 1
[   18.739640] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode
[   18.748183] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[   18.756537] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=30 hwirq=0x200 ffff88027563c000
[   18.756541] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001b (27)
[   18.756983] scsi host1: ahci
[   18.760060] ata1: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 30
[   18.767676] hctosys: unable to open rtc device (rtc0)
[   18.772856] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[   18.781434] ALSA device list:
[   18.784477]   #0: HD-Audio Generic at 0xe4840000 irq 28
[   18.789993] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 ffff88027563c000
[   18.789997] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19)
[   19.251826] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   19.258686] ata1.00: ATAPI: SONY    PS-SYSTEM   412R, 5004, max UDMA/66
[   19.266341] ata1.00: configured for UDMA/66
[   19.274370] scsi 1:0:0:0: CD-ROM            SONY     PS-SYSTEM   412R 5004 PQ: 0 ANSI: 5
[   19.298205] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[   19.305533] cdrom: Uniform CD-ROM driver Revision: 3.20
[   19.311222] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   19.311387] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   19.319225] Freeing unused kernel memory: 1036K (ffffffff81f25000 - ffffffff82028000)
[   19.327247] Write protecting the kernel read-only data: 14336k
[   19.333641] Freeing unused kernel memory: 136K (ffff8800019de000 - ffff880001a00000)
[   19.347210] Freeing unused kernel memory: 1084K (ffff880001cf1000 - ffff880001e00000)
[   19.372033] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff88027563c000
[   19.372039] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[   19.372318] sky2 0000:00:14.1 eth0: enabling interface
[   19.372423] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.458076] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 11
[   21.458089] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #11 len 32 cksum 0xcd
[   21.458091] aeolia_pcie 0000:00:14.4: icc: data:
[   21.458094]  00
[   21.458096]  10
[   21.458098]  00
[   21.458100]  00
[   21.458101]  00
[   21.458103]  00
[   21.458104]  00
[   21.458106]  00
[   21.458107]  00
[   21.458109]  00
[   21.458110]  00
[   21.458112]  00
[   21.458113]  00
[   21.458115]  00
[   21.458116]  00
[   21.458118]  00
[   21.458119]  00
[   21.458121]  00
[   21.458122]  00
[   21.458124]  00
[   21.643611] sky2 0000:00:14.1 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   21.643650] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.291771] random: crng init done
[   35.754896] usb 2-2: new SuperSpeed USB device number 3 using xhci_aeolia
[   35.775703] usb 2-2: New USB device found, idVendor=0781, idProduct=5581
[   35.775708] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   35.775710] usb 2-2: Product: Ultra
[   35.775713] usb 2-2: Manufacturer: SanDisk
[   35.775715] usb 2-2: SerialNumber: 4C530001180212106540
[   35.776204] usb-storage 2-2:1.0: USB Mass Storage device detected
[   35.782860] scsi host2: usb-storage 2-2:1.0
[   36.807317] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[   36.807668] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   36.807863] sd 2:0:0:0: [sdb] 60751872 512-byte logical blocks: (31.1 GB/29.0 GiB)
[   36.808718] sd 2:0:0:0: [sdb] Write Protect is off
[   36.808722] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   36.809048] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   36.835120]  sdb: sdb1 sdb2
[   36.836626] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   79.377862] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities
[   79.378927] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities
[   82.135293] EXT4-fs (sdb2): mounted filesystem with writeback data mode. Opts: (null)
[   82.472031] systemd[1]: Failed to insert module 'autofs4': Function not implemented
[   82.472372] systemd[1]: Failed to insert module 'ip_tables': Function not implemented
[   82.485027] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   82.485510] systemd[1]: Detected architecture x86-64.
[   82.509609] systemd[1]: Set hostname to <localhost.localdomain>.
[   82.966096] systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[   83.195938] systemd[1]: Created slice Root Slice.
[   83.195982] systemd[1]: Starting Root Slice.
[   83.207983] systemd[1]: Listening on udev Control Socket.
[   83.208022] systemd[1]: Starting udev Control Socket.
[   83.223985] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   83.224026] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   83.532610] EXT4-fs (sdb2): re-mounted. Opts: data=writeback
[   83.656039] audit: type=1130 audit(83.428:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.657900] systemd-journald[1820]: File /var/log/journal/7100e49261b64204b3e5612fbed10493/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   83.711905] audit: type=1130 audit(83.484:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.748097] audit: type=1130 audit(83.520:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.827960] audit: type=1130 audit(83.600:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.939898] audit: type=1130 audit(83.712:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.949874] audit: type=1130 audit(83.724:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   84.004034] audit: type=1130 audit(83.776:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   84.019946] audit: type=1130 audit(83.792:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   84.031997] audit: type=1130 audit(83.804:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   84.078182] systemd-journald[1820]: Received request to flush runtime journal from PID 1
[   84.262650] audit: type=1130 audit(84.036:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   86.412214] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000014) mask=0x100000 irq=21 hwirq=0x414 ffff88027563c000
[   86.412220] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 20, addr fee00000 data: 0x00000014 (20)
[   89.633443] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 ffff88027563c000
[   89.633450] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19)
[   90.003782] [drm:drm_bridge_mode_set] *ERROR* attempted to set non-CEA mode
[   90.115390] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[   90.115394] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[   90.119635] [drm:drm_bridge_enable] *ERROR* mode not available
[   94.706016] snd_hda_intel 0000:00:01.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   96.227863] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000014) mask=0x100000 irq=21 hwirq=0x414 ffff88027563c000
[   96.227869] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 20, addr fee00000 data: 0x00000014 (20)
[  420.659160] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[  420.659165] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[  435.886178] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[  435.886190] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[  435.886194] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[  438.672625] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 27
[  438.672639] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #27 len 32 cksum 0xdd
[  438.672641] aeolia_pcie 0000:00:14.4: icc: data:
[  438.672643]  00
[  438.672646]  10
[  438.672647]  00
[  438.672649]  00
[  438.672650]  00
[  438.672652]  00
[  438.672654]  00
[  438.672655]  00
[  438.672657]  00
[  438.672658]  00
[  438.672659]  00
[  438.672661]  00
[  438.672662]  00
[  438.672664]  00
[  438.672665]  00
[  438.672667]  00
[  438.672668]  00
[  438.672670]  00
[  438.672671]  00
[  438.672673]  00
[  638.781673] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[  638.781676] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[  653.984802] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[  653.984813] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[  653.984816] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[  656.796873] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 38
[  656.796884] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #38 len 32 cksum 0xe8
[  656.796886] aeolia_pcie 0000:00:14.4: icc: data:
[  656.796890]  00
[  656.796892]  10
[  656.796893]  00
[  656.796894]  00
[  656.796896]  00
[  656.796897]  00
[  656.796899]  00
[  656.796900]  00
[  656.796901]  00
[  656.796903]  00
[  656.796904]  00
[  656.796906]  00
[  656.796907]  00
[  656.796908]  00
[  656.796910]  00
[  656.796911]  00
[  656.796913]  00
[  656.796914]  00
[  656.796915]  00
[  656.796916]  00
[  656.904635] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[  656.904638] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[  672.159687] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[  672.159697] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[  672.159701] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[  674.916092] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 41
[  674.916105] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #41 len 32 cksum 0xeb
[  674.916107] aeolia_pcie 0000:00:14.4: icc: data:
[  674.916110]  00
[  674.916112]  10
[  674.916114]  00
[  674.916115]  00
[  674.916117]  00
[  674.916119]  00
[  674.916120]  00
[  674.916122]  00
[  674.916123]  00
[  674.916125]  00
[  674.916126]  00
[  674.916128]  00
[  674.916129]  00
[  674.916131]  00
[  674.916132]  00
[  674.916134]  00
[  674.916135]  00
[  674.916137]  00
[  674.916138]  00
[  674.916140]  00
[  674.983902] [drm:drm_bridge_mode_set] *ERROR* attempted to set non-CEA mode
[  675.099513] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[  675.099517] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[  675.103692] [drm:drm_bridge_enable] *ERROR* mode not available
[  676.929297] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[  676.929302] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[  692.124375] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[  692.124386] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[  692.124390] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[  694.945068] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 52
[  694.945082] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #52 len 32 cksum 0xf6
[  694.945084] aeolia_pcie 0000:00:14.4: icc: data:
[  694.945086]  00
[  694.945089]  10
[  694.945090]  00
[  694.945092]  00
[  694.945094]  00
[  694.945095]  00
[  694.945097]  00
[  694.945098]  00
[  694.945100]  00
[  694.945101]  00
[  694.945103]  00
[  694.945104]  00
[  694.945106]  00
[  694.945107]  00
[  694.945109]  00
[  694.945110]  00
[  694.945112]  00
[  694.945113]  00
[  694.945115]  00
[  694.945116]  00
[ 1464.929339] systemd: 80 output lines suppressed due to ratelimiting
[ 4399.726423] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[ 4399.726426] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[ 4414.905519] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[ 4414.905530] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[ 4414.905534] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[ 4417.737525] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 60
[ 4417.737536] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #60 len 32 cksum 0xfe
[ 4417.737538] aeolia_pcie 0000:00:14.4: icc: data:
[ 4417.737542]  00
[ 4417.737543]  10
[ 4417.737545]  00
[ 4417.737546]  00
[ 4417.737548]  00
[ 4417.737549]  00
[ 4417.737551]  00
[ 4417.737552]  00
[ 4417.737553]  00
[ 4417.737555]  00
[ 4417.737556]  00
[ 4417.737558]  00
[ 4417.737559]  00
[ 4417.737560]  00
[ 4417.737562]  00
[ 4417.737563]  00
[ 4417.737565]  00
[ 4417.737566]  00
[ 4417.737567]  00
[ 4417.737568]  00
[ 4417.849405] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[ 4417.849408] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[ 4433.080412] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[ 4433.080423] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[ 4433.080428] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
[ 4435.861684] aeolia_pcie 0000:00:14.4: icc: reply has bad cookie 63
[ 4435.861697] aeolia_pcie 0000:00:14.4: icc: hdr: [42] 10:4000 unk 0 #63 len 32 cksum 0x101
[ 4435.861700] aeolia_pcie 0000:00:14.4: icc: data:
[ 4435.861702]  00
[ 4435.861704]  10
[ 4435.861706]  00
[ 4435.861708]  00
[ 4435.861709]  00
[ 4435.861711]  00
[ 4435.861712]  00
[ 4435.861714]  00
[ 4435.861715]  00
[ 4435.861717]  00
[ 4435.861718]  00
[ 4435.861720]  00
[ 4435.861721]  00
[ 4435.861723]  00
[ 4435.861724]  00
[ 4435.861726]  00
[ 4435.861727]  00
[ 4435.861729]  00
[ 4435.861730]  00
[ 4435.861732]  00

i also have some more errors from xorg. i just patched to xf86-video-ati driver but drm/mesa is still missing. looks like it detects the gpu as liverpool.
i think the provided fedora is too old. maybe i'll setup ubuntu or a more recent version.

xorg.log on pastebin since i still cant post anything containing any links
Code:
pastebin RqyQjTP9

i also tried radeontool and radeontop. they both seemed to work. maybe someone can check the registers.
Code:
Found card 1002:9923 (30000)
Radeon found. Base control address is 7fcf196c3000; base framebuffer address is 7fcf156c3000.
reading RADEON_DAC_CNTL (58) is 00000000
RADEON_DAC_CNTL    00000000
reading RADEON_DAC_EXT_CNTL (280) is 00000000
RADEON_DAC_EXT_CNTL    00000000
reading RADEON_DAC_MACRO_CNTL (d04) is 00000000
RADEON_DAC_MACRO_CNTL    00000000
reading RADEON_DAC_CNTL2 (7c) is 00000000
RADEON_DAC_CNTL2    00000000
reading RADEON_TV_DAC_CNTL (88c) is 00000000
RADEON_TV_DAC_CNTL    00000000
reading RADEON_DISP_OUTPUT_CNTL (d64) is 00000000
RADEON_DISP_OUTPUT_CNTL    00000000
reading RADEON_CONFIG_MEMSIZE (f8) is 00000000
RADEON_CONFIG_MEMSIZE    00000000
reading RADEON_AUX_SC_CNTL (1660) is 00000000
RADEON_AUX_SC_CNTL    00000000
reading RADEON_CRTC_EXT_CNTL (54) is 00000000
RADEON_CRTC_EXT_CNTL    00000000
reading RADEON_CRTC_GEN_CNTL (50) is 00000000
RADEON_CRTC_GEN_CNTL    00000000
reading RADEON_CRTC2_GEN_CNTL (3f8) is 00000000
RADEON_CRTC2_GEN_CNTL    00000000
reading RADEON_DEVICE_ID (f02) is 00000000
RADEON_DEVICE_ID    00000000
reading RADEON_DISP_MISC_CNTL (d00) is 00000000
RADEON_DISP_MISC_CNTL    00000000
reading RADEON_GPIO_MONID (68) is 00000000
RADEON_GPIO_MONID    00000000
reading RADEON_GPIO_MONIDB (6c) is 00000000
RADEON_GPIO_MONIDB    00000000
reading RADEON_GPIO_CRT2_DDC (6c) is 00000000
RADEON_GPIO_CRT2_DDC    00000000
reading RADEON_GPIO_DVI_DDC (64) is 00000000
RADEON_GPIO_DVI_DDC    00000000
reading RADEON_GPIO_VGA_DDC (60) is 00000000
RADEON_GPIO_VGA_DDC    00000000
reading RADEON_LVDS_GEN_CNTL (2d0) is 00000000
RADEON_LVDS_GEN_CNTL    00000000
reading RADEON_LVDS_PLL_CNTL (2d4) is 00000000
RADEON_LVDS_PLL_CNTL    00000000
reading RADEON_FP_GEN_CNTL (284) is 00000000
RADEON_FP_GEN_CNTL    00000000
reading RADEON_FP2_GEN_CNTL (288) is 00000000
RADEON_FP2_GEN_CNTL    00000000
reading index (8) is 00000000
writing index (8) -> 00000002
reading RADEON_PPLL_CNTL (c) is 00000000
RADEON_PPLL_CNTL    00000000
reading index (8) is 00000000
writing index (8) -> 00000003
reading RADEON_PPLL_REF_DIV (c) is 00000000
RADEON_PPLL_REF_DIV    00000000
reading index (8) is 00000000
writing index (8) -> 00000007
reading RADEON_PPLL_DIV_3 (c) is 00000000
RADEON_PPLL_DIV_3    00000000
reading index (8) is 00000000
writing index (8) -> 0000002d
reading RADEON_PIXCLKS_CNTL (c) is 00000000
RADEON_PIXCLKS_CNTL    00000000
reading index (8) is 00000000
writing index (8) -> 0000002a
reading RADEON_P2PLL_CNTL (c) is 00000000
RADEON_P2PLL_CNTL    00000000
reading index (8) is 00000000
writing index (8) -> 0000002b
reading RADEON_P2PLL_REF_DIV (c) is 00000000
RADEON_P2PLL_REF_DIV    00000000
reading index (8) is 00000000
writing index (8) -> 0000002c
reading RADEON_P2PLL_DIV_0 (c) is 00000000
RADEON_P2PLL_DIV_0    00000000
reading index (8) is 00000000
writing index (8) -> 00000008
reading RADEON_VCLK_ECP_CNTL (c) is 00000000
RADEON_VCLK_ECP_CNTL    00000000
reading RADEON_MEM_TIMING_CNTL (144) is 00000000
RADEON_MEM_TIMING_CNTL    00000000
reading RADEON_TMDS_PLL_CNTL (2a8) is 00000000
RADEON_TMDS_PLL_CNTL    00000000
reading RADEON_TMDS_TRANSMITTER_CNTL (2a4) is 00000000
RADEON_TMDS_TRANSMITTER_CNTL    00000000
reading RADEON_CRTC_MORE_CNTL (27c) is 00000000
RADEON_CRTC_MORE_CNTL    00000000
reading RADEON_FP_H_SYNC_STRT_WID (2c4) is 00000000
RADEON_FP_H_SYNC_STRT_WID    00000000
reading RADEON_FP_V_SYNC_STRT_WID (2c8) is 00000000
RADEON_FP_V_SYNC_STRT_WID    00000000
reading RADEON_FP_CRTC_H_TOTAL_DISP (250) is 00000000
RADEON_FP_CRTC_H_TOTAL_DISP    00000000
reading RADEON_FP_CRTC_V_TOTAL_DISP (254) is 00000000
RADEON_FP_CRTC_V_TOTAL_DISP    00000000
reading RADEON_FP_HORZ_STRETCH (28c) is 00000000
RADEON_FP_HORZ_STRETCH    00000000
reading RADEON_FP_VERT_STRETCH (290) is 00000000
RADEON_FP_VERT_STRETCH    00000000
reading RADEON_FP_HORZ_VERT_ACTIVE (278) is 00000000
RADEON_FP_HORZ_VERT_ACTIVE    00000000
reading RADEON_CRTC_H_TOTAL_DISP (200) is 00000000
RADEON_CRTC_H_TOTAL_DISP    00000000
reading RADEON_CRTC_H_SYNC_STRT_WID (204) is 00000000
RADEON_CRTC_H_SYNC_STRT_WID    00000000
reading RADEON_CRTC_V_TOTAL_DISP (208) is 00000000
RADEON_CRTC_V_TOTAL_DISP    00000000
reading RADEON_CRTC_V_SYNC_STRT_WID (20c) is 00000000
RADEON_CRTC_V_SYNC_STRT_WID    00000000
reading RADEON_CRTC2_H_TOTAL_DISP (300) is 00000000
RADEON_CRTC2_H_TOTAL_DISP    00000000
reading RADEON_CRTC2_H_SYNC_STRT_WID (304) is 00000000
RADEON_CRTC2_H_SYNC_STRT_WID    00000000
reading RADEON_CRTC2_V_TOTAL_DISP (308) is 00000000
RADEON_CRTC2_V_TOTAL_DISP    00000000
reading RADEON_CRTC2_V_SYNC_STRT_WID (30c) is 00000000
RADEON_CRTC2_V_SYNC_STRT_WID    00000000
 
  • Like
Reactions: goggor

goggor

New Member
Newbie
Joined
Jan 17, 2018
Messages
3
Trophies
0
Age
36
XP
45
Country
Germany
Thanks,

it seems that the problem is the ps4_bridge (between apu and HDMI output). The normal PS4 uses Panasonic MN86471a hdmi transmitter and the slim/pro uses the Panasonic MN864729 HDMI transmitter.
The implementation is done here:
ps4-linux/drivers/gpu/drm/radeon/ps4_bridge.c
[ 3.308586] fbcon: radeondrmfb (fb0) is primary device
[ 3.436796] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
[ 3.436799] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
[ 3.449372] random: fast init done
[ 18.631859] aeolia_pcie 0000:00:14.4: icc: interrupted or timeout: ret = 0
[ 18.631869] [drm:cq_exec] *ERROR* icc i2c commandqueue failed: -110
[ 18.631872] [drm:mn86471a_enable] *ERROR* Failed to configure bridge mode
 

ecHs

Member
OP
Newcomer
Joined
Jan 16, 2018
Messages
5
Trophies
0
XP
84
Country
Germany
Thanks,

it seems that the problem is the ps4_bridge (between apu and HDMI output). The normal PS4 uses Panasonic MN86471a hdmi transmitter and the slim/pro uses the Panasonic MN864729 HDMI transmitter.
The implementation is done here:
ps4-linux/drivers/gpu/drm/radeon/ps4_bridge.c
yup, thats where i'm stuck right now.

i'd need to know the right registers for the MN864729.

but at least i have built a kernel with support for displaylink usb adapters :mellow:

Code:
mega #!ekYlERgB!UvR_XnPeIJJJ4S8YwYu5xk2fVVOK5MXGRULBw49-9vE
md5 1280b546822c7e9b0b944ee41bd43c17
sha256 291389137bb3214c096dd78affed35f0d91c281c99361f79fedce99abeab00c3

thats it for me.. i'll be looking into pkgdec and make_fself now
 

Califfis

Member
Newcomer
Joined
Jan 19, 2018
Messages
8
Trophies
0
Age
35
XP
43
Country
France
mi piace help you. Where i can found your missing information? Have you try to request help by fail0ver? Maybe haven found the same problem when have made linux for ps4fat
 

Kingston

Active Member
Newcomer
Joined
Mar 24, 2009
Messages
25
Trophies
0
XP
211
Country
United States
It does not look like the datasheet is publicly available for the MN864729 IC. If pins or traces are accessible we could probably dump the initialisation with a i2c sniffer
 

Kingston

Active Member
Newcomer
Joined
Mar 24, 2009
Messages
25
Trophies
0
XP
211
Country
United States
I'm currently trying to dump the communication with the new IC but I need to find the right SCA/SCL for it. I'm using the ones on A02-COL2 right now (pin 17,18) but only get messages to addresses 4c and 5d and nothing that looks like the init sequence....
Anybody has an idea where the other lines are on Pro boards?
 

Califfis

Member
Newcomer
Joined
Jan 19, 2018
Messages
8
Trophies
0
Age
35
XP
43
Country
France
Non riesci a spoofare nella porta HDMI?
[QUOTE = "Kingston, post: 7802002, member: 170007"] Attualmente sto cercando di scaricare la comunicazione con il nuovo IC ma ho bisogno di trovare il giusto SCA / SCL per questo. Sto usando quelli su A02-COL2 in questo momento (pin 17,18) ma ricevo solo messaggi agli indirizzi 4c e 5d e niente che assomigli alla sequenza di init ....
Qualcuno ha un'idea di dove sono le altre linee sulle tavole Pro? [/ QUOTE]

Non riesci a spoofare direttamente nella porta HDMI?
Pin 15 scl
Pin 16 sda
Pin 17 gnd
 

Attachments

  • hdmi-pinout-diagram-585-conexion-patillas-conector-hdmi-wiring.png
    hdmi-pinout-diagram-585-conexion-patillas-conector-hdmi-wiring.png
    9 KB · Views: 1,020
D

Deleted User

Guest
GO GO GO GO people said I was crazy thinking linux can work fine on all ps4 LOVE THIS!
 

Califfis

Member
Newcomer
Joined
Jan 19, 2018
Messages
8
Trophies
0
Age
35
XP
43
Country
France
Ciao alla, non lo sonot if take me what need for porting, i try to request solution to linux community by different distro
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: Out of nowhere I got several scars on my forearm and part of my arm and it really itches.