PS4 Goldhen Ethernet problem

[Vstromakias]

set the ps4 to pppoe and connect it to the router with a cable (first the setting to not get internet and upgrade). connect the computer with a cable to the same router and make sure it got an ip. run pppwn, correct settings (config-ethernet). you run a connection test on 4 and at the same time -run exploid- on pppwn (before it has time to show 4 that there is no connection).

 

[Skdende]

set the ps4 to pppoe and connect it to the router with a cable (first the setting to not get internet and upgrade). connect the computer with a cable to the same router and make sure it got an ip. run pppwn, correct settings (config-ethernet). you run a connection test on 4 and at the same time -run exploid- on pppwn (before it has time to show 4 that there is no connection).

For some reason my PS4 only tries to connect to some switches or routers, it doesn't connect to all of them.

When I finally managed to get it to try to get an IP it was on a very large network, but at least ppwn made a little more progress

He has already passed the PADI stage and now stays in PADR as I leave the attached photo.

Do you have any other suggestions to move forward a little further?

 

[Vstromakias]

first of all, what program is this? I see version 1.5 and of course you run from cmd. the program I sent you is version 1.9 and you simply run an exe. you must be following some old way. pc to ps4 with ethernet cable, press to run the program and at the same time press test connection on ps4.

 

[Skdende]

first of all, what program is this? I see version 1.5 and of course you run from cmd. the program I sent you is version 1.9 and you simply run an exe. you must be following some old way. pc to ps4 with ethernet cable, press to run the program and at the same time press test connection on ps4.

Hello, it is PPPWN Loader 1.5, I have tried all versions including version 9 that you sent me, but this is the only one in which I was able to see progress.

I don't run it in CMD, but by clicking on the clock icon next to the settings, you can see the process that way

 

[imadewolf1]

Did you fix the problem? I have the same thing.

 

[Skdende]

Did you fix the problem? I have the same thing.

Hello

I finally got tired, and it was the best thing.

I bought an accessory that does everything on its own, and since you have to do it every time you turn on the console, it's the best.

Here's the link so you can do the same.

https://es.aliexpress.com/item/1005...st_main.5.f94f194dmyqhab&gatewayAdapt=glo2esp

 

[worm28]

Did you fix the problem? I have the same thing.

Did you install the driver that comes with PPPwn GUI the one that says install first?