Hacking Post your WiiU cheat codes here!

[DEMONDICE]

dont use the tcpgecko app at all the one on the sd card is not needed. dont even download it to your sd card its a waste of time... as soon as youre wii u loads up go straight to loadiine.ovh tcpgecko +kernel 5.5.1 do it twice until it says tcpgecko loaded.. than load up homebrew launcher and loadiine.. pygecko enabled isnt mandatory its just my preference but do whatever works for you ...

I tried it without the app as well, no difference. Don't I need the pygecko option in loadiine? I got my XCX and SFE cheats working fine on disc, but if I try to connect to Wind Waker on loadiine, it won't connect, even though it connects to the disc games fine. Then if I toggle on the option, it hangs at the blue opening screen. This makes no sense.

 

[JingleBells]

Ive found 2 codes for new super luigi bros U for lives. I can manually poke them. When I create a code and send it. The lives change but when i start the world over the game freezes. I'm I doing something wrong? I've tried to figure out how to search for pointers but don't know if I'm doing it right.

First to prevent the freeze add a Terminator line to your code, this will allow the value you "sent" to be overwritten (since in your case you don't have the correct address or pointer)....D0000000 DEADCAFE
Probably the easiest way for you to find the pointer is to do a couple DUMPS and use pointer search app.....Watch Bully's video on HOW TO....

 

[jbuck1975]

First to prevent the freeze add a Terminator line to your code, this will allow the value you "sent" to be overwritten (since in your case you don't have the correct address or pointer)....D0000000 DEADCAFE
Probably the easiest way for you to find the pointer is to do a couple DUMPS and use pointer search app.....Watch Bully's video on HOW TO....

Video is showing TCPGecko dotnet program. I'm using jgeckou

 

[JingleBells]

Video is showing TCPGecko dotnet program. I'm using jgeckou

Don't matter.....Do it the exact same way....JGecko U has the dump option as well. It will work if you use only JGecko U, just follow his video and do every step and you will learn.

Did you realize we joined exactly 2 days apart almost 1 year ago....

 

[DarkFlare69]

Video is showing TCPGecko dotnet program. I'm using jgeckou

Use the corresponding buttons

Don't matter.....Do it the exact same way....JGecko U has the dump option as well. It will work if you use only JGecko U, just follow his video and do every step and you will learn.

Did you realize we joined exactly 2 days apart almost 2 years ago....

1 year *

 

[Mr.???]

I found the y axis for Wind Waker. Can anyone pm on how turn it into a moonjump. I've always wanted to know but could never turn a y axis code into a moonjump hack. thank you

 

[jbuck1975]

when i searched 2 different levels like the video showed. I found the same address on both.

--------------------- MERGED ---------------------------

I found the y axis for Wind Waker. Can anyone pm on how turn it into a moonjump. I've always wanted to know but could never turn a y axis code into a moonjump hack. thank you

Why not just tell you how in the open forum. Others can learn to

--------------------- MERGED ---------------------------

First to prevent the freeze add a Terminator line to your code, this will allow the value you "sent" to be overwritten (since in your case you don't have the correct address or pointer)....D0000000 DEADCAFE
Probably the easiest way for you to find the pointer is to do a couple DUMPS and use pointer search app.....Watch Bully's video on HOW TO....

i searched 2 different levels like the video showed and it came back with the same address.

 

[CuriousTommy]

I found the y-axis for Wind Waker. Can anyone pm on how turn it into a moonjump. I've always wanted to know but could never turn a y-axis code into a moonjump hack. thank you

For you case, this is what you can do:

1. Store the float value for Link's y-axis
2. Add the value of how much you want to increase Link's y-axis by.
3. Then load the float value back to Link's y-axis

However, this type of cheat code is not ideal since the code is going to fight against the velocity of Link's y-axis, that want to push him down.

when i searched 2 different levels like the video showed. I found the same address on both.

Did you try across saves (You tested on save 1, but did you test on save 3)?

 

[Mr.???]

For you case, this is what you can do:

1. Store the float value for Link's y-axis
2. Add the value of how much you want to increase Link's y-axis by.
3. Then load the float value back to Link's y-axis

However, this type of cheat code is not ideal since the code is going to fight against the velocity of Link's y-axis, that want to push him down.



Did you try across saves (You tested on save 1, but did you test on save 3)?

Thank you for responding. Exactly how do you do that though? The code type document is confusing.

 

[RedRose30]

youre wiiu save will only work on youre wiiu no one else can make it work(trust me ive tried everything).. as far as pokken the only thing i was able to mod was cash. i tried skill points, online wins but couldnt make nothing stick. even tried on disc version and downloaded another loadiine version nothing worked for me except money

It will work through Saviine. I've downloaded a save from the Saviine forum before and it worked fine. So long as he/she has a U.S. Wii U, my save will be compatible with his/her system.

So you don't think unlocking the titles will work? Have you tried that one yet?

Thanks for the money one btw

 

[jbuck1975]

i'm stuck with this.
i've tried
00020000 3E7B2EA8
00000063 00000000
D0000000 DEADCAFE

00020000 3E7B2EA8
00000063 00000000
D1000000 DEADCAFE

00020000 3E7B2EA8
00000063 00000000

and all of them freeze. 3E7B2EA8 is the only address that keeps getting found and works when manually poked.

 

[CuriousTommy]

Thank you for responding. Exactly how do you do that though? The code type document is confusing.

It has been a while but I think I remember how to make the actual code. I am going to assume you already know how to make a button activator. Here is a link to the Cafe Codetypes Documentation.

Let's pretend that this is the pointer to Link's height (I will refer to his y-axis as his height)
[[0xXXXXXXXX] + 0xYYYYY] + 0xZZZ

1) First off, lets actually load the pointer (reference)

30000000 XXXXXXXX // Load pointer
10000000 4DF9FFFF // From the start range 10000000 to the *end range 4DF9FFFF
31000000 000YYYYY // Add offset
30100000 00000000 // Load pointer again
10000000 4DF9FFFF // Add range again
31000000 00000ZZZ // Add other offset

*If you are wondering how I got 4DF9FFFF, I use the Memory Bound feature in JGecko U. You can find it under the RPC tab. The start bound is always 10000000 but the end bound depends on the game. This bound is for the US version of Wind Waker.


2) Then we need to Load Link's height value (which is a float) into a register. Since there are eight available, I will pick the first register. We will use Load Float to achieve this (reference)

12100000 00000000

So I am storing Link's height value into the register 0, the first register. Also don't worry about the KKKKKKKK offset, since you already applied the offset in the first step, you can just write eight zeros instead.


3) Now, let's modify the value that we just stored. What we are worried about is doing a Direct Value Operation (We add to the value stored in the first register and apply it back to the first register) (reference)

15040000 41C80000

We are applying an addition operation (4) to register zero with the value 41C80000 (25 in float). Use the conversion tab in JGecko U to convert a Floating Point to Hexadecimal.


4) We can finally apply the result back into Link's height! We need to the Store float feature (reference)

13100000 00000000

Send value from register 0 to Link's height. Just put zeros for the K's, just like what you did for the store float.


5) Most importantly, don't forget your termination code (reference)!

D0000000 DEADCAFE

In conclusion, this is how your code should look like:

Spoiler: Code Example Squashed

// Don't forget you button activactor!
30000000 XXXXXXXX
10000000 4DF9FFFF
31000000 000YYYYY
30100000 00000000
10000000 4DF9FFFF
31000000 00000ZZZ
12100000 00000000
15040000 41C80000
13100000 00000000
D0000000 DEADCAFE

 

[boualex]

somebody could help me for cheat on mario kart 8 i 'm in EUR and i wouldlike a cheat witch item stars etc.. please

and i have test the code speed everyone,when i entry this code he do crash my game, i don' t understand

 

[DarkFlare69]

Mario Kart 8 - Updated Unlock everything (JGecko U)

30000000 11000000
00000000 00000000
31000000 2F7XXXXX
0012710C 03030303
00127110 03030303
00127114 03030303
0012712C 03030303
00127130 03030303
00127134 03030303
0012714C 03030303
00127150 03030303
00127154 03030303
0012716C 03030303
00127170 03030303
00127174 03030303
0012718C 03030303
00127190 03030303
00127194 03030303
0012720C 03030303
00127210 03030303
00127214 03030303
0012722C 03030303
00127230 03030303
00127234 03030303
0012724C 03030303
00127250 03030303
00127254 03030303
0012726C 03030303
00127270 03030303
00127274 03030303
0012728C 03030303
00127290 03030303
00127294 03030303
00128668 03030303
0012866C 03030303
00128690 03030303
00128694 03030303
00128698 03030303
0012869C 03030303
001286A0 03030303
001286A4 03030303
001286A8 03030303
001286AC 03030000
001286D0 03030303
001286D4 03030303
001286D8 03030303
001286DC 03030303
001286E0 03030303
001286E4 03030303
001286E8 03030000
00128710 03030303
00128714 03030303
00128718 03030303
0012871C 03030303
00128720 03030000
00128750 03030303
00128754 03030303
00128758 03030303
00128798 00000303
0012879C 03030303
001287A4 03030303
001287A8 03030303
001287AC 03030303
001287B0 03030303
001287B4 03030303
001287B8 03030303
001287BC 03030303
001287C0 03030303
001287C4 03030303
001287C8 03030303
001287CC 03030303
001287D0 03030303
001287D4 03030303
001287D8 03030303
001287DC 03030303
001287E0 03030303
001287E4 03030303
001287E8 03030303
001287EC 03030303
001287F0 03030303
0012D228 0071FEFF
D0000000 DEADCAFE
*XXXX = User Slot
40000 = User 1
46800 = User 2
4D000 = User 3
53800 = User 4
5A000 = User 5
60800 = User 6

Credit to @BullyWiiPlaza and anyone else who made the original unlock everything. This allows you to specify the player slot in which you want to unlock everything onto.

 

[boualex]

yes thanks ^^

but you know for item ?

 

[DarkFlare69]

yes thanks ^^

but you know for item ?

it's obviously not being released

 

[jbuck1975]

still can get this figured out

 

[t1op]

Does anyone have any ideas for hacking Disney Infinity?
I'm looking for codes that represent items on the base, such as characters, power discs, and playsets. I have 11 characters, 3 playsets, and a couple adventure power discs to test with. I could probably borrow some more...

 

[Thomas83Lin]

In case anyone is interested I managed to get my Donkey Kong Country Tropical Freeze mods\cheats working with the Eshop backups or Original Disc using either Haxchi or Mocha, This works from sysnand or usb. You can get it in my sig.

Before they only worked with loadliine which i still find to be easier but thought I'd would get them working with eshop or a legit disc anyways. Have Fun!

 

[boualex]

anyone get a cheat item for mk8 in eur