Toggle sidebar

Picofly AIO Thread

  • Thread starter Thread starter Adran_Marit
  • Start date Start date
  • Views Views 762,931
  • Replies Replies 3,575
  • Likes Likes 64
Thanks for the reply.
Now may I know why this happens?
The customer told me that it was working fine until it suddenly happened.
Is it a defect that concerns the resistance or is there simply no need for a resistance at that point?
 
pbanj said:

jkyoho https://github.com/pbanj/Fet-1 finally finished. Made 2 different styles​

​

Also working on this https://github.com/pbanj/HB-PCB there is a discussion open on the repo. would love feedback and what not.​

Click to expand...


My friend, THANK YOU SO MUCH.

I ordered 200 pieces, 100 Boba Fet and 100 Jangofet.

THANK YOU SO MUCH, Merry Christmas to you and your family!

May 2025 be bright!
Post automatically merged:

1734392740123.png
 
bf3itu said:
My friend, THANK YOU SO MUCH.

I ordered 200 pieces, 100 Boba Fet and 100 Jangofet.

THANK YOU SO MUCH, Merry Christmas to you and your family!

May 2025 be bright!
Post automatically merged:

View attachment 476189
Click to expand...


for jango you may have to cut the copper side used for v2 to use it on v1. i thinned it out more recently to hopefully solve that. have some on the way to make sure.

i also updated boba so each board is 2 boards. just have to cut them
1734649817618.png


also soon ;)

1734649687404.jpeg



View attachment 1734650107938.jpeg
Post automatically merged:

1734673337018.png



also working on this. waiting for the mosfet to come in. it should work with only one. which would allow for each board to become 4 after you cut it. jlc wont assemble under 10mm*10mm so im keeping all the different version within that range and just adding more to it if i can.
 
Last edited by pbanj,
  • Like
  • Love
Reactions: anon730, SylverReZ, bf3itu and 3 others
pbanj said:
i normally buy my components off lcsc. the TM80N03DF i got from a distributor on alibaba https://szdczy.en.alibaba.com/ even on lcsc they are really cheap too https://www.lcsc.com/product-detail/MOSFETs_Tritech-MOS-TM80N03DF_C7463225.html
Click to expand...
And the IRFHS8342 PBF, where to find a good one?
I could give me the link where you buy.
Post automatically merged:

pbanj said:
i normally buy my components off lcsc. the TM80N03DF i got from a distributor on alibaba https://szdczy.en.alibaba.com/ even on lcsc they are really cheap too https://www.lcsc.com/product-detail/MOSFETs_Tritech-MOS-TM80N03DF_C7463225.html
Click to expand...
One more question: is it possible for me to order the adapters already assembled with the components from JLCPCB?
Post automatically merged:

pbanj said:
for jango you may have to cut the copper side used for v2 to use it on v1. i thinned it out more recently to hopefully solve that. have some on the way to make sure.

i also updated boba so each board is 2 boards. just have to cut them
View attachment 476612

also soon ;)

View attachment 476649


View attachment 476614
Post automatically merged:

View attachment 476647


also working on this. waiting for the mosfet to come in. it should work with only one. which would allow for each board to become 4 after you cut it. jlc wont assemble under 10mm*10mm so im keeping all the different version within that range and just adding more to it if i can.
Click to expand...


I would like to make a donation to help with the project. Do you have KO-FI?
 
Last edited by bf3itu,
Having an issue, installed a picofly on a v1 switch, everything was smooth. Console shut down out of nowhere and now all i get is a single pulse blue light from the chip. Found that the ram got pretty toasty upon further inspection.

Any leads?
 
bf3itu said:
And the IRFHS8342 PBF, where to find a good one?
I could give me the link where you buy.
Click to expand...

i got the ones i have from some random sellers on aliexpress. but the supplier i got the TM80N03DF from also has the pbf

bf3itu said:
Post automatically merged:


One more question: is it possible for me to order the adapters already assembled with the components from JLCPCB?
Click to expand...

should be able to, it is just really expensive to get flex cables assembled. on the github i put some cost breakdowns. https://github.com/pbanj/Fet-1#price-breakdowns

the cables are super easy to assemble. just need to have a hot plate(these can be found for $20 on aliexpress), have a stencil made, and some decent low temp solder paste.

bf3itu said:
Post automatically merged:




I would like to make a donation to help with the project. Do you have KO-FI?
Click to expand...

on the github there's a few different things

https://github.com/pbanj/Fet-1#help-fund-current-and-future-projects




---------------------------------------------------------

so i got in the updated jangofet in

1735856160158.png

no need to cut the vertical pad for it to fit the v1. i did have to shorten the "legs" as they were too long for the v1(can just cut them to fit}. also the default fpc thickness on jlc is extremely thin, make sure to up the thickness to 1.2.
Post automatically merged:

Sendpie said:
Having an issue, installed a picofly on a v1 switch, everything was smooth. Console shut down out of nowhere and now all i get is a single pulse blue light from the chip. Found that the ram got pretty toasty upon further inspection.

Any leads?
Click to expand...

post pics
 
Last edited by pbanj,
  • Like
Reactions: SylverReZ
pbanj said:
pics
Click to expand...
so i looked at it again today, the battery charged a little bit. but now im getting error 2101-0001 (0x265) on both emunand and OFW. there was some hissing sound coming from the apu. really weird considering i used the console for a good amount of time before it shut off.
Post automatically merged:

Does anyone know the value of this resistor right next to the capacitor? And if i could pull it from an oled donor board?
 

Attachments

  • Screenshot_20250103-161932_1.png
    Screenshot_20250103-161932_1.png
    3.4 MB · Views: 50
Last edited by Sendpie,
Sendpie said:
so i looked at it again today, the battery charged a little bit. but now im getting error 2101-0001 (0x265) on both emunand and OFW. there was some hissing sound coming from the apu. really weird considering i used the console for a good amount of time before it shut off.
Post automatically merged:

Does anyone know the value of this resistor right next to the capacitor? And if i could pull it from an oled donor board?
Click to expand...
yes you can pull the parts off a donor board.
 
some updates on picochu for those who care. flasher design is finally done, now the software side needs to be done. the picocenter hat template is done. i have the hardware for the flasher on the way to me so the software side can be worked on. i was also able to shrink picochu down .8mm so it is now 10x18mm.


heres a crappy 3d render of the bottom of the flasher
1736139980776.png
 
  • Love
  • Like
Reactions: cramm and lightninjay
Is emunand necesarry? I've had v1 for years without emunand but now i can buy v2 with picofly already installed. From what i've checked it has emunand but i want to have more storage for games/other systems and i don't mind to be banned - can i safely remove emunand?
 
szczuru said:
Is emunand necesarry?
Click to expand...
Yes. It's recommended to always be offline on your EmuNAND for running your backups and homebrew alone, Nintendo can otherwise flag your console as suspicious.

pbanj said:
some updates on picochu for those who care. flasher design is finally done, now the software side needs to be done. the picocenter hat template is done. i have the hardware for the flasher on the way to me so the software side can be worked on. i was also able to shrink picochu down .8mm so it is now 10x18mm.
Click to expand...
Dealing with RF frequencies you'll need plenty of grounding vias so that it wouldn't interfere and produce noise on the lines.
 
SylverReZ said:
Yes. It's recommended to always be offline on your EmuNAND for running your backups and homebrew alone, Nintendo can otherwise flag your console as suspicious.
Click to expand...
I know that but as i said - i don't care being banned. So my question is - does v2 with picofly can work without emunand? Just like v1 few years ago with sysnand with atmosphere?
 
Ok thanks! Last question are there any special steps using v2 with chip to eg update atmosphere etc? Or can i do everything like i've done in v1? Eg booting payloads, installing android? What about with autorcm and fuses?
 
szczuru said:
Ok thanks! Last question are there any special steps using v2 with chip to eg update atmosphere etc? Or can i do everything like i've done in v1? Eg booting payloads, installing android? What about with autorcm and fuses?
Click to expand...

Autorcm is useless with a chip. The chip loads whatever you have named "payload.bin"on the root of the sd card. Most use hekate. Everything else is the same as with a v1.
 
  • Like
Reactions: szczuru

Site & Scene News

Go to forum More news

Popular threads in this forum

Dusk for switch (TLoZ Twilight Princess port)

Homebrew  New Homebrew "Foil Server"?

Homebrew  Full List of N64 Recompilation Switch ports

Hacking  WiFi chip failing and can't boot. is it possible to enable Airplane Mode by editing system save files directly?

Homebrew Tutorial Translation Project  CS2SX — Write Nintendo Switch Homebrew in C#

Is it fixable

Homebrew  Sonic Unleashed Recompiled (Homebrew Port)

Hacking Emulation  Switch Prod Keys downloading from sites okay?