Picofly AIO Thread

[Dee87]

Have Fun Guys

i know its not the best , but for now the best i could do

 

[naldo29]

so theres no difference between using the pinouts on the emmumc or using the ones on the board? just a matter of prefference.

 

[Dee87]

so theres no difference between using the pinouts on the emmumc or using the ones on the board? just a matter of prefference.

yes
u can also use them from the emmc directly

 

[cicci084]

there are shematics on the first page only us connections on emmc connector if u know what u are doing otherwisen use different pinouts

Post automatically merged: Apr 10, 2023

did u reboot?

Do you see the firmware version installed on the rp2040 from the pikofly toolbox on your switch modded with rp2040?

Post automatically merged: Apr 10, 2023

I did everything but when I try booting it the led:
Blue/pink then nothing and then stay on blue, there isn't any sign of life from the switch so what did i do wrong?

Btw the 3.3v resistor got off and i put it back so that's maybe an issue?

Shot a photo, only this we can help you.

 

[Dee87]

Do you see the firmware version installed on the rp2040 from the pikofly toolbox on your switch modded è with rp2040?

Post automatically merged: Apr 10, 2023

Shot a photo, only this we can help you.

yeah i saw it

 

[MXRD4K1LL4]

I couldn't really get any clear pic

It's blue for 3 seconds, then pink for 0.2 seconds.
Then usually stays on blue

Btw I used a mosfet and the wires are under the thermal paste and tape

I connected everything on the emmc board and connected 3v and gnd to the resistors on the second picture

I don't have an idea why it's written 5•3 on the switch..

 

[fujitsubo]

my RP2040-Zero was flashed with 2.5 when it was installed. i now see a video on youtube of someone using the hwyfly toolbox to update from 2.5fw on the rp2040 zero to 2.6.1. i was under the assumption this is not posssible as the firmware only gained the ablity to update via the toolbox in 2.6 so is this video complete BS or if i follow the video correctly will it actrually update the fw on my picofly correctly

 

[Voultar]

There's a rumor going around that the author of PicoFly just got served papers. Does anyone know if there's any truth to that?

 

[SylverReZ]

There's a rumor going around that the author of PicoFly just got served papers. Does anyone know if there's any truth to that?

That sounds like a false statement.

 

[Donnie-Burger]

That sounds like a false statement.

Whos the supposed author?

 

[cowboy619]

I couldn't really get any clear pic


View attachment 364184
View attachment 364185

View attachment 364186
This time it got blue for 3 seconds, then cyan for 0.5 seconds.
Then usually stays on blue
Before it was pink in place of cyan.
Do that means that i have a bad cpu / clock ?

Btw I used a mosfet and the wires are under the thermal paste and tape

I connected everything on the emmc board and connected 3v and gnd to the resistors on the second picture

I don't have an idea why it's written 5•3 on the switch..

Add more thermal paste


Sent from my iPhone using Tapatalk

 

[SubstituteSW]

I'm sorry to ask but can this be done with a regular rpi pico ? I can't figure out the rgb mode the standard unit boots with a green light and then goes out so I try to bridge gp pins 25 and ground but I'm not getting an led color change nit matter what I try

 

[fujitsubo]

I'm sorry to ask but can this be done with a regular rpi pico ? I can't figure out the rgb mode the standard unit boots with a green light and then goes out so I try to bridge gp pins 25 and ground but I'm not getting an led color change nit matter what I try

to big wont fit unless you cut it down

 

[SubstituteSW]

to big wont fit unless you cut it down

Aw I was hoping removing the button and port was enough oh well. Thanks

 

[Dee87]

I couldn't really get any clear pic


View attachment 364184
View attachment 364185

View attachment 364186
This time it got blue for 3 seconds, then cyan for 0.5 seconds.
Then usually stays on blue
Before it was pink in place of cyan.
Do that means that i have a bad cpu / clock ?

Btw I used a mosfet and the wires are under the thermal paste and tape

I connected everything on the emmc board and connected 3v and gnd to the resistors on the second picture

I don't have an idea why it's written 5•3 on the switch..

if u get cyan that means u need to check ur cpu pi u might have to install a second mosfet

 

[cliffkhew]

Hi all!I have my Lite RP2040 zero FW2.61 mod.Everything is running smooth but have an issue that trying to boot OFW by Power Vol+ and Vol-,give me the black screen and need to power off by holding for seconds.But in Hekate,can boot into OFW.Is this a common issue for Lite?

 

[RexSonic]

Hi all!I have my Lite RP2040 zero FW2.61 mod.Everything is running smooth but have an issue that trying to boot OFW by Power Vol+ and Vol-,give me the black screen and need to power off by holding for seconds.But in Hekate,can boot into OFW.Is this a common issue for Lite?

Update to 2.62

 

[Phantomas77]

Update to 2.62

2.64 came out shortly after

 

[Adran_Marit]

Github has 2.64 now

 

[cliffkhew]

Update to 2.62

Updated to 2.64 but still can't boot into OFW by holding vol+ and vol- 1st then short press power button once?Am I doing the right sequence?