Gaming Lag Issue

  • Thread starter Thread starter NDStemp
  • Start date Start date
  • Views Views 4,267
  • Replies Replies 28

NDStemp

GBAtemp?! No! NDStemp
Member
Joined
Aug 30, 2008
Messages
627
Reaction score
0
Trophies
1
Age
33
Location
Canada, Ontario
Website
Visit site
XP
294
Country
Canada
I've been lagging (FPS lag) in every game even with a new PSU and Graphics card. My friend tells me it's my processor but I don't know what he means by that. My basic system specs are as follows:

OS: Windows 7 Ultimate 32 bit
Processor: Intel® Core™2 Duo CPU E6850 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 4096 MB RAM
Graphics Card: NVIDIA GeForce GTX 460
PSU: Corsair HX850w

Any help?

dxdiag_1.png dxdiag_2.png cpuz_1.png cpuz_2.png cpuz_3.png cpuz_4.png
 
DDR1/2/3? Motherboard model? More details on the graphics card please (exact model).

I'm going to bed now, but tomorrow I'll try to help, if its not solved yet.
 
Well considering your specifications greatly exceed the recommended for those games my guess would be that there's another underlying problem.

What kind of lag is it? Is it slowdown like frame-rate lag or like online lag where you rubberband around? The latter is usually due to your internet.
 
Modern CPUs downclock themselves when they are close to overheating, which could explain this kind of lag you're describing. You should probably look up the CPU temperatures to see if that's the case here.

HWMonitor should be able to help you check that.
 
Law said:
Well considering your specifications greatly exceed the recommended for those games my guess would be that there's another underlying problem.

What kind of lag is it? Is it slowdown like frame-rate lag or like online lag where you rubberband around? The latter is usually due to your internet.

Slowdown like frame-rate lag.

Edit: Are these temperatures normal then?

wardware_monitor.png
 
Play a game that lags, then quickly minimize/exit it and check the processor's current clock rate in CPU-Z and the temperatures, then press CTRL+SHIFT+ESCAPE to open up the task manager, go to the "processes" section, and sort by CPU (NOT memory), and see which processes are using the highest percentage.
 
Your PSU probably isn't enough or is going bad. Also, that CPU is greatly bottlenecking your card.

Run GPU-Z and start OCCT and run the GPU then PSU test.

Make sure your GPU is kicking up into it's 3D clocks (with GPU-Z's monitoring mode).

Clean out your old drivers with this http://downloads.guru3d.com/Guru3D---Drive...tup)_d1655.html and update to the newest.
 
fischju said:
Your PSU probably isn't enough or is going bad. Also, that CPU is greatly bottlenecking your card.

Run GPU-Z and start OCCT and run the GPU then PSU test.

Make sure your GPU is kicking up into it's 3D clocks (with GPU-Z's monitoring mode).

Clean out your old drivers with this http://downloads.guru3d.com/Guru3D---Drive...tup)_d1655.html and update to the newest.

It's a brand new PSU and I've cleaned and reinstalled my drivers. Issue still exists. ;\
 
Is the video card connected to the PSU?
There are two plugs on the back of the card that have to be powered from the PSU.
 
CPU doesn't seem to be overheating, but you should still stress the system with OCCT and/or Furmark and run GPU-Z to confirm the video card is switching to 3D clocks.

You also have a MASSIVE pagefile, which seems to be in use quite a lot. Do you see a lot of hard drive activity in games? Run a SMART test on it with Speedfan, which can also give you a rough voltage check of your 3.3/5/12v rails. (Should be within 5% of rated each) Should also run a memtest.

Might want to check those 6 pin GPU PSU connectors again too, they can be a bitch to connect firmly, and can even push one one of the cables if it's bent a bit.
 
Yes, but performance shouldn't have decreased since your last GPU, you would have just hit a plateau where the GPU isn't being fully utilized (like it would be at 60% usage) while the CPU is at 100%.

Power, heat, drivers, HDD (failure or fragmentation), RAM, pick one and test for it.
 

Site & Scene News

Popular threads in this forum