Misc I tried everything - please help me!

[Jhonyb]

I just bought a new DSI so i tried too connect too my wireless router (everything conects great too it, my laptop my Wii friends laptop ipod touch)
So i read that DSi didnt like WAP so i changed my router too:

WEP
802.11b
Channel 1

Sometimes the connection just tests great but when i go for the update just doesnt work and after not working in the update the connection test never works again giving the damn 052210-1 error code.

Im out of solutions and options here help pls

 

[k4ever]

Try to reset your router to its factory settings either manually or by accessing the settings via web. If after this, u still have the same problem, try getting online by using another device like a laptop or cellphone. If they connect, then the problem is your dsi. If they not, then the problem comes from the router settings.

 

[Jhonyb]

I cant reset my router its pre configured (its part of watching TV and stuff)
I find it odd that a new console has so many problems connecting too the internet shouldnt be any issues at all

Today i tried too connect too an hotspot trotally open DSi said it couldnt obtain an ip any solutions therE?

 

[Sterling]

I cant reset my router its pre configured (its part of watching TV and stuff)
I find it odd that a new console has so many problems connecting too the internet shouldnt be any issues at all

Today i tried too connect too an hotspot trotally open DSi said it couldnt obtain an ip any solutions therE?

I know

also have you tried to use Advanced settings under where you select your connection? well it leads to 3 other connections supposedly especially for higher security connects. also I have At&t internet and it connects just fine, if this helps any give me a W00T

alo internet did not work for me at a totally open starbucks hotspot either, and i don't know whats up with that.

 

[zero383]

DSi currently supports both WEP (for games) and WPA (for browser, store, and updates only). Both types work fine on my Linksys WRT54GL.

It's not the console that's the problem, it's your router and/or the way you set it up. With the limited info you provide, I can assume the following:

1) Make sure DHCP is turned on in your router settings . Otherwise it won't automatically assign an IP to your DSi. Also, make sure that if there is an option for "Max DHCP IP Addresses" to make it high enough to allow room for the DSi.

1) On your router, when you set up the WEP encryption, you would have created a pass key. Make sure it has the right amount of characters and that it's entered correctly on your DSi. Also, some routers allow you to choose from 4 keys. DSi only supports the key in the #1 position, so make sure to pick that one.

 

[Jhonyb]

@Sterl500

I already tried advanced settings and advanced setting with manual input of WAP-TSK settings + ip + dns never passed the testing the connection part.
I googled tons of solutions i tried almost all of them.
I can't really mess with the router configurations bc the router is responsible from bringing cable TV too my home so i dont have much maneuverability here

Information about the router:

Thomson Gateway TG787

Copy pasting the settings:

Configuration

Interface Enabled: Yes
Physical Address: ************
Network Name (SSID): Jhonyb
Interface Type: 802.11b/g
Actual Speed: 54 Mbps
Band: 2.4G Hz
Channel Selection: Auto
Channel: 1
Allow multicast from Broadband Network: No

Security

Broadcast Network Name: Yes
Allow New Devices: New stations are allowed (automatically)
Security Mode: WPA-PSK
WPA-PSK Preshared Key: *************
WPA-PSK Encryption: TKIP
WPA-PSK Version: WPA


I changed Interface Type too 802.11b and WAP too WEP and i even tried with no key nothing worked... if u have any kind of solution too add up i would appreciate it.

I have too voice my complaint too nintendo a NEW console with so many wireless issues? is this even possible?????? are they preparing too launch a new console too replace the DS's (i doubt it)?

 

[zero383]

Try changing Channel Selection to Manual, not Auto

On your DSI, use connection slot 4, 5 or 6 if you're using WPA. Slot 1, 2, and 3 do not support WPA, only WEP.

Based on your router settings, make sure you choose the encryption type "WPA-PSK(TKIP)" on your DSi. FYI, the best encryption method is WPA2-PSK(AES) which is what I'm using and it works fine. One downside is that WPA is not supported in games.

Also, here is Nintendo's support page for your error code:

http://www.nintendo.com/consumer/wfc/en_na...mp;locale=en_US

 

[Jhonyb]

I changed channel to manual (channel 1)
I changed to the WPA2-PSK (AES)

Still the same error code also i already used the nintendo page for my error code no solution is there for me.