Need help—I need to know which specific points the PSP 1000 joystick contacts connect to.

ioQuake3-PSP

Mayo1990 · 2026-08-17T01:36:39+00:00

This was mostly a thing I wanted to make out of curiosity, since it was for an essay project. There was already a Quake 3 port for the PSP made by Crow-bar, which hasn't been updated in 15 years. Despite the long gap that it missed in the Homebrew development scene, I want to come clear and say that I didn't plan in fixing their port because per-my rule, unless I'm being asked by the official authors, I'm not gonna add slop to their codebase. I did take some very good things out of it, which helped me greatly with my port. Just as if it wasn't clear, AI has been used in this project. But everything has been tested on real hardware. Be aware that unlike my other ports, this one will just be Quake III Arena and that's it. Nothing else. No Dreamcast crossplay, no Open Arena, just Q3. The console felt very limited even though the dev scene is pretty huge. Now that I came clean, what's the point of this port if there was already one? My primary goal was to provide a new Quake 3 port that can be easily compiled with modern toolchains. But at the same time, make it a bit easier to maintain. Compared to Crow-Bar's, this port also has the online fully working (note: their port still connected online but you needed to place the IP in the autoexec), as well as taking more advantage of the console and adding a few more aggressive cvars, thus achieving, with a 333 MHz clock speed, a median of 30 FPS on the benchmark demo. (still 30 in-game, though) Be aware that this is still a work in progress and I plan on polishing it further in the future. Still, don't expect wonders. This thing will most likely choke in big maps or with too many bots. Now, another addition is that the latest Ark does support overclocking, and Quake 3 does take great benefit of it. Funny datas: Installation Place pak0-8 in /PSP/GAME/QUAKE3/baseq3/ from your own Quake III Arena copy. Button layout: You use the stick to aim, and Triangle/Square/Circle/Cross to move. L to jump and R to shoot. Left and right are next/previous weapon. Down to crouch, Start to pause and Select to check the scoreboard. It doesn't work with PSP 1000/FAT or PPSSPP. Untested on Adrenaline since there's VitaQuakeIII over there. Get it here More funny screens:

GoodFellas

Well-Known Member

Newcomer

Level 4

Today at 4:45 PM

I need help. I found that contact 3 has no resistance reading, while the other three contacts show normal resistance values. So, I scraped into the second PCB layer at this contact, but it still reads no resistance, leading me to conclude that there's an internal trace break within the board layers or an IC failure.

Through Google searching, I learned that both contacts 2 and 3 connect to the B303 IC, but I don't know which specific point underneath this IC they connect to. I then removed this IC and used a continuity test on contact 2, confirming that contact 2 connects to the red point. However, when I tested contact 3, I found that it was not connected to any point. Therefore, I concluded that the IC itself is not damaged, but rather an internal board line is broken.

To fix this, I need to figure out which point contact 3 connects to, but I'm currently unable to confirm it.

Hardware Need help—I need to know which specific points the PSP 1000 joystick contacts connect to.

Well-Known Member

Similar threads

Popular threads in this forum