Toggle sidebar

Hacking i need help with my unpatched switch

  • Thread starter Thread starter Sirhendryk
  • Start date Start date
  • Views Views 1,356
  • Replies Replies 16
Sirhendryk

Sirhendryk

Member
Newcomer
Level 1
Joined
Dec 12, 2022
Messages
12
Reaction score
0
Trophies
0
Age
19
XP
57
Country
Germany
it dosnt show any image but payloads worked but still black screen autorcm was on now off with the bbriccmii payload and now it dosnt do anything so i need help
 
yes it loads the payload (tested it thru loading tegraexplorer and connecting Joy-Cons and it rumbeled)
 
yes still black screen
Post automatically merged:

btw the last thing i did before this was boot into emummc saw the nintndo switch logo and it had a black screen and the sd connector is running in 1bit mode wtf that is
Post automatically merged:

Zyvyn said:
Make sure your Hekate build on the SD is the same as the version you are injecting.
Click to expand...
 
Sirhendryk said:
yes still black screen
Post automatically merged:

btw the last thing i did before this was boot into emummc saw the nintndo switch logo and it had a black screen and the sd connector is running in 1bit mode wtf that is
Post automatically merged:
Click to expand...
Can you boot the system normally?
 
Zyvyn said:
Can you boot the system normally?
Click to expand...
yea update i am in stock (i think) and hear sound touch works joycons work but still no picture
Post automatically merged:

Sirhendryk said:
yea update i am in stock (i think) and hear sound touch works joycons work but still no picture
Click to expand...
is there a cable that i could have damged or disconnect when repairing my switch
 
Sirhendryk said:
yea update i am in stock (i think) and hear sound touch works joycons work but still no picture
Post automatically merged:


is there a cable that i could have damged or disconnect when repairing my switch
Click to expand...
If you are in OFW and have no video that is a hardware issue I assume. Make sure the backlight isnt dead first. Is the screen visible in a well lit room at all?
 
Sirhendryk said:
where can i see what is wrong
Post automatically merged:
Click to expand...
Try docking the switch. If it displays through dock then we can confirm that its the display of the device itself.
Post automatically merged:

Also from what I was reading sometimes a hard reboot of the system can fix the issue if its not hardware related. Try holding power for a solid 20 seconds and powering back on. If you have autoRCM disabled it should boot back up into the Switch OS.
 
Last edited by RyanTheArchivist,
Zyvyn said:
Try docking the switch. If it displays through dock then we can confirm that its the display of the device itself.
Post automatically merged:

Also from what I was reading sometimes a hard reboot of the system can fix the issue if its not hardware related. Try holding power for a solid 20 seconds and powering back on. If you have autoRCM disabled it should boot back up into the Switch OS.
Click to expand...
i see it again on my screen so it defently my switch
Post automatically merged:

Sirhendryk said:
i see it again on my screen so it defently my switch
Click to expand...
i am happy a sign of life
 
Sirhendryk said:
only docked
Post automatically merged:


u there?
Click to expand...
I apologize. If the display is working docked but not on the device itself then there is very likely some hardware issue. I'm not experienced with the insides of the Switch so I do not think I help past this point.
 
Zyvyn said:
I apologize. If the display is working docked but not on the device itself then there is very likely some hardware issue. I'm not experienced with the insides of the Switch so I do not think I help past this point.
Click to expand...
ok thank you
Post automatically merged:

Zyvyn said:
I apologize. If the display is working docked but not on the device itself then there is very likely some hardware issue. I'm not experienced with the insides of the Switch so I do not think I help past this point.
Click to expand...
omg i am fkn stupid i the smal cable from the right buttom was not correctly connected i feel so stupid
 
Last edited by Sirhendryk,

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew Homebrew game  Chrono Trigger - Switch port

Emulation Homebrew PS1/2 Emulator  ARMSX2-NX Initial Release

Homebrew Homebrew game  Half Life 2 (Source Engine) - Switch Port

Homebrew Homebrew game  GTA: Chinatown Wars - Switch port

Homebrew Homebrew game  Final Fantasy IV 3D Remake - Switch port

Hacking Homebrew Tutorial  New Switch Modpack, NX-ModPack

Homebrew Homebrew game  Lego Star Wars: The Complete Saga · Switch Port

Homebrew Homebrew game  Castlevania Symphony of the Night - Switch port