Hacking I need help with awoo

[dagamer]

I downloaded TOTK on awoo and i keep on trying to download the updates but it always shows "failed to install TLOZ TOTK.nsp! partially installed contents can be removed from the system settings applet" then it shows a file directory and then says Error code: 0x001fd602? does anyone know how to fix this?

 

[Hayato213]

Download the contents on a computer and use a title installer to install it.

 

[dagamer]

Download the contents on a computer and use a title installer to install it.

i do that and it doesnt work?

 

[Hayato213]

i do that and it doesnt work?

Try a different title installer like dbi.

 

[WalterSlovotsky]

I downloaded TOTK on awoo and i keep on trying to download the updates but it always shows "failed to install TLOZ TOTK.nsp! partially installed contents can be removed from the system settings applet" then it shows a file directory and then says Error code: 0x001fd602? does anyone know how to fix this?

Are you installing from USB or directly from your memory card? Sometimes Awoo gets stuck if you are trying to do it through USB with a less-than-great USB-C cord, or if you are trying to queue up multiple installs at once.

Also, are you using it in applet mode, or with full memory by booting into the Homebrew menu after selecting a title while holding R? I have more success NOT using applet mode, and using the original cord my Pro Controller came with.

I hope this helps.

 

[dagamer]

Are you installing from USB or directly from your memory card? Sometimes Awoo gets stuck if you are trying to do it through USB with a less-than-great USB-C cord, or if you are trying to queue up multiple installs at once.

Also, are you using it in applet mode, or with full memory by booting into the Homebrew menu after selecting a title while holding R? I have more success NOT using applet mode, and using the original cord my Pro Controller came with.

I hope this helps.

u use full mem mode, I also use download it useing the wifi thing where it streams it form ur pc to the switch

Post automatically merged: Jun 22, 2023

Try a different title installer like dbi.

how do i do that?

 

[Hayato213]

how do i do that?

https://github.com/rashevskyv/dbi/releases/tag/576

Put dbi files on the sd via ftp or hekate usb mounting feature.

 

[WalterSlovotsky]

u use full mem mode, I also use download it useing the wifi thing where it streams it form ur pc to the switch

Post automatically merged: Jun 22, 2023

how do i do that?

Trying to stream it is very likely your issue.

Use a high-quality USB-C to A cord, and install it over USB. It will go much, much faster and will be much more reliable.

 

[dagamer]

Trying to stream it is very likely your issue.

Use a high-quality USB-C to A cord, and install it over USB. It will go much, much faster and will be much more reliable.

ill try this ty

Post automatically merged: Jun 22, 2023

Put dbi files on the sd via ftp or hekate usb mounting feature.

i will try that thanks!

 

[WalterSlovotsky]

ill try this ty

Post automatically merged: Jun 22, 2023

i will try that thanks!

I use this as a front-end on my gaming PC, and it works a treat. Highly recommended.

https://github.com/developersu/ns-usbloader

 

[dagamer]

I use this as a front-end on my gaming PC, and it works a treat. Highly recommended.

2 things, first i already use that, and second is that every time i plug my switch in it says no usb connection detected.

 

[WalterSlovotsky]

2 things, first i already use that, and second is that every time i plug my switch in it says no usb connection detected.

It's your cord. Trust me. I went through ten different cords until I found the one that worked. I used the cord from my Pro Controller, and the one from my Turtle Beach headset also works. Had the exact same issue.

Try a different USB port on your PC, and a better cord, and make sure you click that little gearbox so you can download the drivers for your system, if you have not already.

 

[dagamer]

It's your cord. Trust me. I went through ten different cords until I found the one that worked. I used the cord from my Pro Controller, and the one from my Turtle Beach headset also works. Had the exact same issue.

Try a different USB port on your PC, and a better cord, and make sure you click that little gearbox so you can download the drivers for your system, if you have not already.

i just used my pro controller wire and it didn't work

 

[WalterSlovotsky]

i just used my pro controller wire and it didn't work

And you have the drivers and everything installed?

Hmmm. I would bite the bullet and copy it to your SD card and manually install it, then. Sucks if you can't get it to work. This is the fastest method of installation I know of.

I might delete the NS-USBLoader, reinstall it and try updating the drivers again. If that fails, go SD card install. Good luck.

 

[dagamer]

And you have the drivers and everything installed?

Hmmm. I would bite the bullet and copy it to your SD card and manually install it, then. Sucks if you can't get it to work. This is the fastest method of installation I know of.

I might delete the NS-USBLoader, reinstall it and try updating the drivers again. If that fails, go SD card install. Good luck.

i tried installing it with the sd card only and it didnt work it said files are corrupt (I used multiple files and they all don't work), i dont know what you mean by saying the drivers and everything

Post automatically merged: Jun 22, 2023

https://github.com/rashevskyv/dbi/releases/tag/576

Put dbi files on the sd via ftp or hekate usb mounting feature.

i did this and it said the files where corrupt

 

[linuxares]

Then maybe they're corrupted?

 

[WalterSlovotsky]

i tried installing it with the sd card only and it didnt work it said files are corrupt (I used multiple files and they all don't work), i dont know what you mean by saying the drivers and everything

Post automatically merged: Jun 22, 2023

i did this and it said the files where corrupt

When you boot up NS-USBloader, the gearbox will give you an option to download and install the drivers so your PC can recognize your Switch. If you have not done this already, it will never actually connect, no matter what cord you use.

Try installing the drivers and see if that helps.

 

[dagamer]

Then maybe they're corrupted?

the thing is i downloaded multiple version of what im trying to download and they ALL don't work so idk

Post automatically merged: Jun 22, 2023

When you boot up NS-USBloader, the gearbox will give you an option to download and install the drivers so your PC can recognize your Switch. If you have not done this already, it will never actually connect, no matter what cord you use.

Try installing the drivers and see if that helps.

it let me use the usb but it still doesnt work!

 

[derpo]

I hate to ressurect a dead post, but your SD card is failing. Mine too. Use a new SD card.

 

[cjwers]

I will also ressurect a dead post. I am running into this issue with switch #1, tried awoo, tinfoil, and goldleaf from NS-USBloader and from the SD itself and error every time. I tried it on my switch #2 with awoo and ns-usbloader and the same file took right away and was playable. I feel bad because the Micro SD is 512gb and pretty new but I know its not an issue with the computer, computer software, file, usb, switch software, (I even updated atmosphere and hekete on Switch #1 and tried it all again)... It may be the SD card. Hopefully this info helps someone in the future.

Post automatically merged: Jul 20, 2024

I hate to ressurect a dead post, but your SD card is failing. Mine too. Use a new SD card.