How to SoftMod a Wii to Play Backup Wii, Gamecube and Wiiware Games

(Disclaimer: Stop in your tracks and visit
https://gbatemp.net/threads/modify-any-wii-4-3-below.171901/
It is a MUCH more updated tutorial for Soft-Modding your Wii. )

(If you new to Softmod a Wii this will give you a 100% safe guide from start-to-finish to play Wii Games, Gamecube Games and Wiiware/Virtual Console games from an USB-drive. Im not kidding. In this guide we only use official files to minimize any risks apart from Step 4 . But I can assure I used this guide to softmod my sister's Wii. She can now play Skyward Sword by USB-drive without problem! )

Requirements:
*SD Card (no SDHC)
*SD Card reader
*Wii updated to 4.3 (4.3 is latest version, just update your Wii and you be fine)
*Internet Connected Wii
*USB-hdd to store Wii games and Gamecube games
*To play Gamecube games you need this Wii Console and Gamecube Controller
(No Gamecube Memory Card is required if you use NMM)

A short description what each step does
Step 1 - You install Homebrew Channel to install Apps.
Step 2 - Safety Precaution. Backup Wii System (NAND) to your PC.
Step 3 - Safety Precaution. Install Priiloader to prevent disc updates to damage your Wii.
Step 4 - Patch IOS and Install WADs using Two Easy Apps. Install USB Loader GX to Play Wii Games .
Step 5 - Install a d2x Custom IOS to enable New Wii Games. Install DiosMios to Play Gamecube Games.
(Spoilers Window) Add 'n Play Wii/Gamecube Games + Update USB Loader GX (req for Gamecube games)
Step 6 - emulate Wii System (NAND) on USB-hdd making Add WiiWare/VC Games near impossible to damage your Wii .

1. Install Homebrew Channel

Follow HighTeckMans instructions in video :


2. Backup Wii NAND (to restore your Wii if anything goes wrong)

Important! Make sure SD-card has more then 700mb free space
Important! Make sure your Wii has more then 700 blocks open. To Check: Turn on your Wii. Goto Wii Options - Data Management - Save Data - Wii. In 'Blocks Open:' there should stand 700 or higher. Then Return to Wii Menu. Press Back 4 times.
Follow S Winegars instructions in video :
- In BootMii use the Power button to cycle through options in the menu, and Reset to select.


1. When Wii NAND is backed-up using Project Phoenix Medias video guide. Shutdown Wii. Remove SD-card from Wii and put SD-card into Computer.
2. Open SD:\ and check that you have two following files 'NAND.BIN' and 'KEYS.BIN'. Copy these two files into a safe location on your Computer. My tips is to save them into a usb-stick or Dropbox if your Computer crash.
3. Once you saved the two files 'NAND.BIN' and 'KEYS.BIN' you should remove them from SD-card (NAND.BIN takes 500mb)
4. Done!

3. Install Priiloader (regionfree games and stop updates)

1. Plug SD-card into Computer
2. Download Priiloader_v0_7.zip . Unzip and Put it into your SD Card. (SD:\)
3. Download hacks_hash.ini - Scroll down to 'Pre-compiled Hacks download' , right-click, save link as, and save into SD:/apps/Priiloader/ .
4. Remove SD-card from Computer and plug into Wii . Turn on your Wii. Launch Homebrew Channel. Then launch Priiloader.
5. Press A to Install
6. Once Priiloader is installed shut down the Wii (Sometimes you Wii freezes after Priiloader installation. Its totally normal. Just re-start your Wii with reset and after Wi Menu appears shut down the Wii)

(configure Priiloader)
1. Press the "Power" button while holding down the "Reset" button on your Wii until the Priiloader menu is displayed on your screen.
2. In Priiloader select "System Menu Hacks". These are the following 7 hacks I suggest you select: 'Region free EVERYTHING', 'Block Disc Updates', 'Remove NoCopy Save File Protection', 'Block Online Updates', 'Remove Diagnostic Disc Check', 'Move Disc Channel', 'Auto Press 'A' at health screen'. Select Save Settings when Done.
3. To Exit Priiloader select System Menu
4. Done!

A video how to configure Priiloader can be found here :


PS: By having Priiloader you prevent disc updates that can damage Homebrew.

4. Install USB Loader and Custom ISO

Follow HighTeckMans instructions in video - Zip-file from Youtube video Required :

Important! Skip 10:00 - 13:00 in the video. We will not use Wbfs Manager instead we use WiiBackupManager to add Wii games, explained in Part 5 - spoiler windows - Play Wii/Gamecube games from USB-hdd.

5. Play Newer Wii Games, Gamecube games and Install USB Loader GX

Follow Aces instructions in video - Zip-file from Youtube video Required :

Important: At 3:30 in Video (WiiMod) make sure in 'Wii Mod' to install IOS249[56]-d2x9b47.wad before you install DIOSMIOS. After you installed IOS249-d2x goto Main Menu of 'Wii Mod' and select 'Change IOS' and pick 249 . Look in Main Menu right corner it should stand 'Current IOS: 249 . You want to install DIOSMIOS to IOS 249 as you will be playing your gamecube games and wii games from 249.

*After you installed cIOS249-d2x and changed IOS to 249. Continue with Video instructions

How to Update USB Loader GX, Backup Wii/Gamecube Games and Play Wii/Gamecube games from SD-card and USB-device. Also use NNM and compability list for gamecube games. Press Spoilers Inside.


Update USB Loader GX to latest version
*Required to play Gamecube games.
1. Plug SD-card into Computer
2. Open DMLizard type 2 and 2 then s to download USB Loader GX . Once downloaded type 0 then 0 to Exit DMLizard . Copy dmlizard\copy-to-sd\apps\usbloader_gx\ to SD:\apps\usbloader_gx\ - overwrite current files
3. Remove SD-card from Computer and plug into Wii
4. Done!

Play Wii/Gamecube games from USB-hdd
1. Format your USB to FAT32 with cluster size 32KB using FAT32 Format. Download to Desktop and Run. Select Drive and '32768' as Allocation unit Size. Choice a Volume Label, Mark Quick Format and Start the Format Progress. Like this - http://i.imgur.com/E6CXvPP.png
2. To Play Gamecube Games - Create a folder 'games' inside the FAT32 HDD. Download and Open DMToolbox v.0.3 (Windows XP version) (Works with Windows 7). Click 'black folder' in Gamecube ISO: and select your GameCube ISO file . Click 'yellow folder' in Output dir: and choose any folder (i.e. Desktop) . Finally Press Install . After installation is complete, in Desktop move the GAMEID folder to USB:\games\ .
3. To Play Wii Games - Download and Open WiiBackupManager . Click 'Drive 1' and select USB-drive from 'inactive' . Click 'Files' - 'Add - Files' and select your Wii ISO file(s) . Lastly Click 'Transfer - Drive 1' to put all Wii ISO file(s) into your USB-drive .
4. Remove USB-drive from Computer and plug into Wii . Also plug in Gamecube controller and Gamecube Memory Card in Wii .
5. Turn on your Wii. Launch USB Loader GX . Press this icon (Loader Mode) !! ( http://i.imgur.com/ioqV74i.png ) . Select Wii Games and GC Games .
6 Done!

Backup Wii/GameCube Disc
1. Plug USB-drive into Wii . Start Wii . Launch USB Loader GX .
2. Put a Wii/Gamecube Disc into the Wii . Wait then click 'Install' and 'OK' .
3. When installation is done. You can click the newly added game to get its boxart .
4. Remove your Wii/Gamecube Disc from the Wii.
5. Done!

Play Gamecube games from SD-card
1. Plug SD-card into Computer .
2. Add your GameCube ISO file(s) to SD:\games\
3. Open DMLizard type 1 then 2 to download DIOS MIOS Lite . Once downloaded type 0 then 0 to Exit DMLizard . Copy files from dmlizard\copy-to-sd\wad\ to SD:\wad\ .
4. Remove SD-card from Computer and plug into Wii . Also put in Gamecube controller and Gamecube Memory Card in Wii .
5. Turn on your Wii. Launch Homebrew Channel. Then launch Wii Mod .
6. Goto WAD Manager . And install two WAD files 'DIOSMIOSLite_v2.10.wad' and 'RVL-BC-v6.wad' . Close Wii Mod after installation.
7. Launch USB Loader GX . Press this icon (Loader Mode) !! ( http://i.imgur.com/ioqV74i.png ) . Select GC Games . Start your GameCube Game .

NNM - No More Memory Cards
NNM is an alternative saving method for gamecube games. You simply don't need a Gamecube Memory Card anymore. You enable NNM in 'Settings' inside USB Loader GX. With NNM enabled your saves for gamecube games are stored in the Wii, not a memory Card.

DIOS MIOS Compatibility List for Gamecube games
http://wiki.gbatemp.net/wiki/DIOS_MIOS_Lite_Compatibility_List

Alt to DIOSMIOS (Devolution) req Retail Discs
Devolution is an alternative method to DIOSMIOS with higher compability but needs an retail Discs of current game in order to play.
1. Plug SD-card into Computer. Goto http://gbatemp.net/threads/devolution-public-release.330554/ and download Devo_src package on first the first post.
2. Open Zip-file and put "/gc_devo/" folder into SD:/apps/ .
3. Remove SD-card from Computer and plug into Wi.
4. Launch USB Loader GX and go to Settings > User Paths > DEVO Loader path : Set the folder to " SD:/Apps/gc_devo/data/ " .
5. Lastly, either in global settings (for ALL gamecube games) or in the individuel game settings . Set "GameCube Mode to "Devolution" instead of "MIOS".

Launch the Game, it will flash the Wii light until yor ISO is verified. Put your retail disc to vertify the backup, then play the game. (Cyans words _ Developer of USB Loader GX)

DIOS MIOS Formula
Install DIOSMIOS_v2.11.wad and RVL-BC-v6.wad to Play Gamecube games from USB
Install DIOSMIOSLite_v2.11.wad and RVL-BC-v6.wad to Play Gamecube games from SD-card
Install RVL-mios-v10.wad to remove DIOSMIOS and use Gamecube Disc as normal
6. Install emuNAND to play Wiiware/VC games

A. Important! Make sure SD-card has more then 600mb free space
B. Plug SD-card into Computer . Make a folder in SD-card called 'GxEmunand' like SD:\GxEmunand\ .
C. Remove SD-card from Computer and plug into Wii . Turn on your Wii. Launch USB Loader GX.

(Check emuNAND paths and create EmuNAND on SD-card)
A. In USB Loader GX goto Settings - Custom Paths
B. Change 'Nand Emu Path' and 'Nand Emu Channel Path' to SD:\GxEmunand\ (just press A and (..) folder-icon to go back and choose that one.)
C. Make Sure 'Loader Settings' - Boot/Standard is 249 or change to 249. Then in Loader Settings set 'Nand Chan Emulation' to 'Full'.
D. Go USB Loader GX - Settings - Features and press 'Dump NAND to EmuNand' . Wait a serious long time until complete.. (grab a sandwhich) . Once dump NAND is complete - Shutdown Wii

(use emuNAND on Computer)
A. Plug SD-card into Computer
B. Download and install ShowMiiWads on your PC from http://code.google.com/p/showmiiwads/downloads/list
C. Unrar into C:\wii\showmii\ and open ShowMiiWads.exe
D. Press 'Options' - 'Change NAND Backup Path' to SD:\GxEmunand\
E. Press 'View' - 'ShowMiiNand'
F. Press 'Tools' - 'Create Common Key'

How to Backup, Install and Play Wiiware games and also use emuNAND on USB. Press Spoilers inside.

To Backup your Wiiware/VC games
In ShowMiiWads - select the file called 'Channel Title' - games name' , then right-click , pack wad, and choose a suitable location , like C:\wii\showmii\backed-games\ , press OK.

To Install a backed-up Wiiware/VC game
Right-click in ShowMiiWads - 'Install' - 'File' - select game-wad file.

To Play a backed-up Wiiware/VC game
A. Remove SD-card from Computer and plug into Wii . Turn on your Wii. Launch USB Loader GX.
B. Press this icon (Loader Mode) !! ( http://i.imgur.com/ioqV74i.png )
C. Select only EmuNAND Channels

(If you have invisible channels using USB Loader GX - Loader Mode - EmuNand Channels. You can remove them by following step. Press A on them to go into animation mode. Press Settings (NOT START). Uninstall Menu. Uninstall Game. GAME ONLY. - Do this for all invisible channels and you will have only your games showing.)

To use emuNAND on USB-drive (FAT32)
A. Plug SD-card and USB-drive into Computer
B. Move SD:\GxEmunand\ folder to USB:\GxEmunand\
C. Open ShowMiiWads.exe and Options - 'Change NAND Backup path' to USB:\GxEmunand\ .
D. Remove SD-card from Computer and plug USB and SD-card into Wii . Turn on your Wii. Launch USB Loader GX
E. In USB Loader GX go Settings - Custom Paths
F. Change 'Nand Emu Path' and 'Nand Emu Channel Path' to USB:\GxEmunand\ (just press A and (..) folder-icon to go back and choose that one.)
G. Press Back and return to USB Loader GX
H. Done!

Error using Wiiware through EmuNAND?
PS: Just so you know - I tried it myself. If you WiiWare wasn't working through emuNAND. Look in USBLoader GX - Settings - Credits, if your using the 'cIOS249-d2x-v10-beta52' it will not work! Go ahead and install IOS249[56]-d2x9b47.wad using Step 5 in this guide. Then Wiiware works.

Fix Blackscreen with VC in emuNAND
Happens when playing USA games with a European Wii. Open selected VC game - 'Settings' - 'Loader Settings'in 'Video Patch 'select Force NTFC. Press Save. Now it should work.

Use cheats (Ocarnia) in Wiiware/VC games
Unfortunely I can't get Ocarnia working with Wiiware/VC games in USB Loader GX. So an alternate solution is to use the App '....tbc

The benefit of emuNAND
WAD installation happens on Computer therefore there is NONE TO LESS risk of Brick your Wii. If you wish to play Wiiware/VC games emuNAND is your solution. period.

Extras

Step by step guide how to fix a semibricked Wii

http://gbatemp.net/threads/step-by-step-guide-for-bootmii-nand-wii-backup-restore.176877/
(Don't use this guide if your Wii works fine)

Install WiiFlow

Video overview of WiiFlow features:


A. Plug SD-card into Computer
B. Download WiiFlow v4.2.zip and WiiFlow_Channel_Installer_v1.1.zip from http://code.google.com/p/wiiflow/downloads/list . Open both zip-file and move folder 'apps' to SD:\
C. Remove SD-card from Computer and plug into Wii . Turn on your Wii. Launch Homebrew Channel. Then launch WiiFlow Channel Installer. And install it!
D. Done!

Install WiiSX (Play Playstation1 Games)

Follow FeuerfaustGolDAces instructions in video - Zip-file from site Required:


How to Fix Nintendo Wii Black Screen
(Happens when you install incorrect theme)

Follow MicrowaveSams instructions in video :


How to fix Black and White Screen on Wii games
(Happens when you Play "PAL" European or Japanese games and they're black and white and not in colors which they supposed to be)

Follow YourGadgetSolutions instructions in video :


Install Homebrew Browser (install apps without computer!)

Follow iHackUrWiis instructions in video :

 

[tivu100]

SD is for installing Softmod + apps = less then 1gigabyte . Only reason you even getting a SD over 500 mb is so you can backup your wii. It takes just about 500+mb.
Also you emulate your wii to play Wiiware / VC games. That takes some harddrive space as well.

SD = apps + softmod
USB hhd = Wii / Gamecube games + Wiiware / VC games. + whatever else you want on a harddrive.

OP said the above, so I am really confused. I would prefer sd card tbh. I was thinking about getting 64GB. There is only 1-2 Wii games I/my nephews want to play. I am more interested in boyhood NES, SNES N64 games, which I want to get as many as I can on the SD so I don't have to transfer over and over again.

I can't really give you a proper estimate since I'm assuming you wish to have various NES, SNES, and N64 ROMS, each of different file sizes (the latter having the greatest file size). I use an 8GB SD Card and I can tell you from personal experience, having the extra space is always a good thing. I previously had a 2GB, and I found myself needing more space really quickly.

It's hard to say because, firstly, different ROM platforms have different sizes and secondly, for each platform, game sizes can vary a lot. Best thing is to get a 2gb SD card and for roms and stuff get another SD card such as 8 GB.

 

[HaloEffect17]

OP said the above, so I am really confused. I would prefer sd card tbh. I was thinking about getting 64GB.

I run all my games through the SD Card (Wii, GCN, PSX, N64, etc.), so naturally, I would want a larger SD. Its all relative to what you want. 64GB is great; personally, the more the space you have, the better. Especially if you don't plan on investing on a USB HDD.

 

[tivu100]

I run all my games through the SD Card (Wii, GCN, PSX, N64, etc.), so naturally, I would want a larger SD. Its all relative to what you want. 64GB is great; personally, the more the space you have, the better. Especially if you don't plan on investing on a USB HDD.

So I can follow OP, and use 64GB SDXC for ROMS right?

 

[HaloEffect17]

So I can follow OP, and use 64GB SDXC for ROMS right?

Yeah. It seems that you are concerned about the OP saying that the SD Card is only for the apps and softmodding files. Not true. You can run games/ROMS like Wii and GCN through an SD Card. I've done it myself since: a) I don't want to purchase a USB HDD dedicated to my Wii, and b), I don't want to have a USB HDD sitting on top of my Wii if I don't have to.

Just check the compatibility list for SD Cards and you'll be fine.

 

[tivu100]

Yeah. It seems that you are concerned about the OP saying that the SD Card is only for the apps and softmodding files. Not true. You can run games/ROMS like Wii and GCN through an SD Card. I've done it myself since: a) I don't want to purchase a USB HDD dedicated to my Wii, and b), I don't want to have a USB HDD sitting on top of my Wii if I don't have to.

Just check the compatibility list for SD Cards and you'll be fine.

Okay. Thanks for your help.

 

[Wizardkoer]

So basically get a 2GB SD card. This one is to have the homebrew apps that require the sd card to be less or equal to 2 GB. And get another SD card which is 32 GB or less. Homebrew may support upto 64 GB or something like that (im not sure) but I believe the Wii system menu 4.0 and above support up to 32 GB. The 32 GB will be more than enough to store all the N64, SNES, NES ROMS. So to clear up get these two:

-2GB SD card
-32GB SD card

I personally just have a 2 GB SD card because I don't really play ROMS.

 

[ca032769]

So I can follow OP, and use 64GB SDXC for ROMS right?

I use a 128gb SDXC card with no problems. The 2gb SD card is just to get you modded. After modding I think any Wii v4.1 & above can use the SDHC & SDXC cards.

I've been using the 128gb SDXC for over 6 months now, along with an external 4TB USB HDD without any problems.

 

[adrian_002]

hi, im a noob and i dont know what happend but something went wrong in step 4 and 5 and i use CFG USB LOADER MOD the game freeze after 4 minutes. if i haveto start all over again i just have to restore my wii nand whit BootMii? every change on ios in step 3,4 and 5 will be deleted?

here is my syscheck, maybe i did something wrong:

Spoiler

SysCheck v2.3.2 HacksDen Edition by JoostinOnline Double_A R2-D2199 and Nano
...runs on vIOS58 (rev 6432).



Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: 12.07.2010
Homebrew Channel 1.1.2 running on IOS58



Hollywood v0x21
Console ID: 158635361
Console Type: Wii
Shop Channel Country: Mexico (36)
Boot2 v5

Found 79 titles.
Found 48 IOS on this console. 15 of them are stub.



IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1290): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 782): No Patches
IOS13 (rev 1288): No Patches
IOS14 (rev 1288): No Patches
IOS15 (rev 1288): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1288): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1295): No Patches
IOS22 (rev 1550): No Patches
IOS28 (rev 2063): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3864): No Patches
IOS33 (rev 3864): No Patches
IOS34 (rev 3864): No Patches
IOS35 (rev 3864): No Patches
IOS36 (rev 3864): No Patches
IOS37 (rev 5919): No Patches
IOS38 (rev 4380): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3863): No Patches
IOS43 (rev 3863): No Patches
IOS45 (rev 3863): No Patches
IOS46 (rev 3863): No Patches
IOS48 (rev 4380): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5919): No Patches
IOS55 (rev 5919): No Patches
IOS56 (rev 5918): No Patches
IOS57 (rev 6175): No Patches
IOS58 (rev 6432): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5918): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 7200): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS236[36] (rev 65535 Info: rev 3351): Trucha Bug ES Identify NAND Access
IOS249[56] (rev 65535 Info: d2x-v9beta(r47)): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65281): BootMii
BC v6

MIOS v10 (DIOS MIOS 2.11+)
Report generated on 08/11/2015.

 

[Banjo1]

Hi, I've been following the tutorial and am stuck on Step 5. When trying to load "USB Loader GX-UNEO_Forwarder.wad" I get the error "ERROR! (ret = -1022)".

How can I resolve this please? Is is a bad .wad file or something to do with the IOS?

 

[somewhereovertherainbow]

do you still have problems?

--------------------- MERGED ---------------------------

Sorry, have not seen your two post until now.

I used this guide myself, im terribly sorry if my guide has caused problem for you.

someone who can help out these two in gbatemps forum?

 

[Banjo1]

Managed to get my problem sorted by using a different download for the USB Loader GX. There may be a problem with the one linked on HighTekMan's video, or maybe it was just a user error on my side.

Anyway it's all up and running, your guide is fantastic, thank you so much!

 

[branueye]

Hey Stephaniie, fantastic guide. Thanks for making it and sticking around to help everyone.

Each step has been working for me until now, which is Step 5 where you said to install IOS249[56]-d2x9b47.wad in WiiMod before installing DIOSMIOS. It seems to install normally but when I try going back to the Main Menu in WiiMod it starts checking IOS's and gets stuck on Stub 223 (not frozen, just keeps trying to proceed endlessly)

I had to shutdown with the power button to retry this step and it happens the same every time. I could just go ahead because IOS 249 shows up on the 'Change IOS' list but I'm concerned that this hang up on the IOS check means there is something wrong with it so I figure it's better to ask before proceeding.

Any help would be greatly appreciated. Thanks for you time.

 

[Banjo1]

Branueye, I had the same issue and just carried on with the tutorial after powering off the console. Not had any follow up problems.

 

[branueye]

Thanks Banjo1

 

[somewhereovertherainbow]

yes banjo. dont use highteckmans usbloader, use the newest one that is available in dmlizard. ...

i should make a note that its essential to do all step 1-5 including the spoilers inside window, so you use the latest version of usbloader.

summary: dont use highteckmans usbloader gx until you update it in spoilers window in step 5 .

--------------------- MERGED ---------------------------

hope that sorted your problems branueye, . imnot sure why ios check would freeze.

 

[DaftMink]

I can't install BootMii, will this cause any problems or will it just mean I can't restore the NAND if bricked ?.
Error: The installed boot1 version prevents a boot 2 install (-2)
The system is the white console and I got on Ebay, (shipped with parental lock, which I removed).

Thanks in advance for the help.

 

[hyrulebr]

Hi, I'm stuck in step 5. DMlizard doesn´t have the same option as the video (lack download option). Probably because DMlizard are in offline mode. I tried in 3 different computers and always got offline mode! Desactivate antivirus and firewall. Still offline.

Please what I´m missing?

 

[somewhereovertherainbow]

I can't install BootMii, will this cause any problems or will it just mean I can't restore the NAND if bricked ?.
Error: The installed boot1 version prevents a boot 2 install (-2)
The system is the white console and I got on Ebay, (shipped with parental lock, which I removed).

Thanks in advance for the help.

it will not affect anything in particular,

Boot menu is just an option for older wiis.
You are fine wihout it on a softmodded wii.

My sis wii has no boot2 menu, its softmodded without anh issues,

--------------------- MERGED ---------------------------

Hi, I'm stuck in step 5. DMlizard doesn´t have the same option as the video (lack download option). Probably because DMlizard are in offline mode. I tried in 3 different computers and always got offline mode! Desactivate antivirus and firewall. Still offline.

Please what I´m missing?

get another version of dmlizard,
sent link in pm.

 

[hyrulebr]

Stephanie

Thanks for the link but still doesn´t work.

If I just unzip it and try to run, I got this message:

"missing at least one required file. Please estabilish an internet connection and restart DMlizard.
DMlizard will automatically download the required file then"

If I just replace the executable in the directory from the zip file from Ace (youtube), DMlizard runs, but still offline.

It seams the program cannot connect to the internet or the server is down(?).

Do I have another option to install it without DMlizard?

Thanks

 

[hyrulebr]

Hi,

I tried to use Modmii and update all console. Download each wad showed in Ace video and installed with wiimod all wads. First I use IOS249[56]-d2x9b47.wad without sucess. I can see and play all wii games. But I can see gamecube games, but got black after loading (Dios mios logo not loaded). I tried ttwo different version of USB loader and cfg usb loader.

I also tried to install 249 d2x-v10beta52. Same results.

I generated a syscheck file. Maybe someone can tell me what is missing. See in the end both
BC v6
MIOS v10 (DIOS MIOS 2.6.1+)

Installed.



sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: 2008.12.18
Homebrew Channel 1.1.2 running on IOS58
HomebrewFilter ist nicht installiert
Hollywood v0x21
Console ID:
Boot2 v4
Found 77 titles.
Found 50 IOS on this console. 4 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS249[56] (rev 21010, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21010, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10 (DIOS MIOS 2.6.1+)

Report generated on 2015/10/03.