Hacking Help installing Homebrew Channel

[BassTeQ]

Hi all,

I'm just after some assistance getting the HBC setup and running. I have a PAL Wii running v3.4E with a WiiKey v1.

Now I've followed the instructions as per this site --> http://gwht.wikidot.com/usb-loader
So to get started Ive followed the link here --> http://gwht.wikidot.com/homebrew-channel

I've got a blank SD card, so following the steps,

1. Get BannerBomb and extract it to the SD Card, I've used the latest version aad1f_v108.zip
I now have a file on my SD card \private\wii\title\aktn\content.bin

2. Get HackMii Installer v0.6 or later from Here
I open the zip, there are a few files in there, but the instructions say just to extract the file boot.elf into the root of the SD card.

Now I put the card in the Wii and load the boot.elf, it loads fine comes up with the warning, and to press 1 to continue.

This is where it gets stuck, I press 1 and nothing happens, the Wii freezes. I try a different version of the BannerBomb, aad20_v108.zip

Still no good! I'd just like to know if what I'm doing is correct, and I should just keep trying different versions of BannerBomb, or have I missed something?

Any help is greatly appreciated!

Thanks

 

[BassTeQ]

Don't know if this helps, but I just found a installer.log on my SD card.


HackMii v0.6 installer starting up
PVR = 00087103
running under IOS 36 rev 0xc12
68 titles are installed
Found IOS 254: revision: 0x2.
Found IOS 51: revision: 0x1219.
Found IOS 10: revision: 0x300.
Found IOS 50: revision: 0x1319.
Found IOS 36: revision: 0xc12.
Found IOS 28: revision: 0x50c.
Found IOS 22: revision: 0x309.
Found IOS 14: revision: 0x106.
Found IOS 37: revision: 0xe19.
Found IOS 33: revision: 0xb10.
Found IOS 35: revision: 0xc10.
Found IOS 34: revision: 0xc0f.
Found IOS 31: revision: 0xc10.
Found IOS 30: revision: 0xb00.
Found IOS 21: revision: 0x20a.
Found IOS 17: revision: 0x205.
Found IOS 20: revision: 0x100.
Found IOS 13: revision: 0xf.
Found IOS 12: revision: 0xb.
Found IOS 11: revision: 0x100.
Found IOS 15: revision: 0x109.
Found IOS 2: revision: 0x182.
Found IOS 9: revision: 0x208.
Found IOS 4: revision: 0xff00.
IOS versions: Installer: 34, HBC: 36, DVDX: 36
launching IOS for the installer...starting preparationsCalling boot2_run(1, 34)
Waiting for boot2 to load ...
boot2 loaded, waiting for IOS
IOS loaded: IOS34 v12.15
IPC started (0)
parsing last generation bootmap
found valid boot2 blockmap at block 1 (pos 0x627c0), submap 0, generation 2
found valid boot2 blockmap at block 5 (pos 0xe67c0), submap 0, generation 3
parse_blocks: found 2 valid blockmaps
found 2 valid blockmaps
using generation 3
boot2 blocks: 00 01 02 03 04 05 06
boot2bin @5,0 (blocks=0,1 - bootmii=0)
bootmii@-1,-1
boot2 blocks: 06 05 04 03 02 01 00
boot2bin @5,1 (blocks=6,5 - bootmii=0)
boot2 block layout: 2 2 1 1 1 0 0
Assembling boot2 in RAM
copyright size = 34
copyright text = 'Copyright 2008,2009 Team Twiizers.'
tmd ends at 0x80295dac, data starts at 0x80295de0
bootmii version = '1.1'
Ok for boot2 install
preparations done!

 

[BassTeQ]

Anyone?

Thank you

 

[DKAngel]

try a diff version of the hackmii installer, see if u can find an older one

 

[anime4ever]

or bannerbomb.

They have several ''same'' version.

 

[BassTeQ]

Ill first try all versions available of bannerbomb, then I'll look for an older hackMii installer.
I'll post back the results.

Cheers