PS1/2 Having trouble getting HDD to appear in the browser

NTA

Member
OP
Newcomer
Joined
May 26, 2010
Messages
24
Trophies
0
XP
188
Country
United States
I'm trying to figure out how I can properly format it and everything, but I'm having trouble understanding the process. Here's the first tutorial I came by
http://psx-scene.com/forums/f153/softmodding-fat-ps2-hard-disk-drive-[tutorial]-116178/

I have the ide to usb adaptor

I also got this error following the tutorial
1/7/2015 3:47:16 PM
1/7/2015 3:47:16 PM HDD Raw Copy Tool 1.02; http://hddguru.com
1/7/2015 3:47:16 PM
1/7/2015 3:47:16 PM * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
1/7/2015 3:47:16 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
1/7/2015 3:47:16 PM
1/7/2015 3:47:16 PM Source: [0] RAW ULE_442B_SMALL.IMG [4942.84 KB]
1/7/2015 3:47:16 PM Target: [1] Maxtor 2 F040L0 0000 [40 GB]
1/7/2015 3:47:19 PM Locking device...
1/7/2015 3:47:19 PM Copying...
1/7/2015 3:47:19 PM Write Error occurred at offset 4,915,200 (87)
1/7/2015 3:47:19 PM Cannot write to target, aborting...
1/7/2015 3:47:19 PM Average speed: 18.1 MB/s
1/7/2015 3:47:19 PM Operation terminated at offset 4,915,200 LBA 9600

It's the official Sony HDD: SCPH-20401

Not sure if I hear correctly, but it sounds like it turns on for a little while and then turns off. Not sure what that's about.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • BigOnYa @ BigOnYa:
    Here's some chicken noodle soup and sprite, you will be fine.
  • BigOnYa @ BigOnYa:
    Sucks my new tv does not fit my old tv wall mount, so gotta take down and buy a new mount, bummer, more holes in the wall.
    +1
  • linuxares @ linuxares:
    no...
  • AncientBoi @ AncientBoi:
    yesssssssssssssssssssssss
  • AncientBoi @ AncientBoi:
    bj bj bj bj bj bj
  • K3Nv2 @ K3Nv2:
    Just duct tape the TV to the wall ffs
    +2
  • BigOnYa @ BigOnYa:
    Weird cause its same size as old one, just a 4k upgrade, oh well, always something.
  • K3Nv2 @ K3Nv2:
    Unlike @AncientBoi some holes are tighter than the others
    +2
  • AncientBoi @ AncientBoi:
    Try putting it up after a couple of :grog::grog::grog::grog::grog::grog::grog: But only a couple :D
    +1
  • BigOnYa @ BigOnYa:
    Was gonna, already cracked open a cold one, but gonna have to wait now, and make a trip to Microcenter, or worst buy
    +1
  • K3Nv2 @ K3Nv2:
    In speaking of miscares for tvs I must've busted like one hdmi port cause it's all static but others work fine lol
    +1
  • BigOnYa @ BigOnYa:
    I have a older tv that was like that, luckily it had 3 HDMI ins
  • AncientBoi @ AncientBoi:
    2 here
  • BigOnYa @ BigOnYa:
    But you only like to use the rear one, right
    +1
  • K3Nv2 @ K3Nv2:
    Think if I rebend the metal it'll be fine because it tries to get a signal
  • K3Nv2 @ K3Nv2:
    @AncientBoi, only fits type c out
    +1
  • AncientBoi @ AncientBoi:
    HDMI 1 [main TV] is loose, HDMI 2 [goes to second TV] is good.
  • K3Nv2 @ K3Nv2:
    Look into a hdmi splitter
    +1
  • BigOnYa @ BigOnYa:
    Or most surround sound receivers are 3 HDMI in, one HDMI out to tv, and you can select which hdmi in
    you want on the receiver.
    +1
  • K3Nv2 @ K3Nv2:
    Surround sound receiver is a good $300
  • BigOnYa @ BigOnYa:
    True, but so nice for gaming, movies.
  • K3Nv2 @ K3Nv2:
    Ancientboi is old he needs Walmart PA system
    +2
    AncientBoi @ AncientBoi: lol