Hacking Gateway + Update SYSnand Mode?

[GodSec]

Hey guys
i have a little question:
Some days ago I set up A9LH.
Everything works just fine.
I installed AuReinand with "update Sysnand mode" works fine too
But now I want to use my gateway card. I set up a 9.2 emuNand and I can launch gateway perfectly. So far so good.
But I want to play online an use some other stuff. Now I want so know how I can setup my emuNand to still boot in gateway but at the same time have a 10.7 emuNand... I tried some stuff with the firmeware90.bin but I think that didn't work.
I know it's sound a little bit weird: have a nice a9lh powerd system but still use gateway.. I like gateways cheat system and that should only be temporary until gateway supports a9lh
I hope you con help me

 

[Columbo2811]

Hey guys
i have a little question:
Some days ago I set up A9LH.
Everything works just fine.
I installed AuReinand with "update Sysnand mode" works fine too
But now I want to use my gateway card. I set up a 9.2 emuNand and I can launch gateway perfectly. So far so good.
But I want to play online an use some other stuff. Now I want so know how I can setup my emuNand to still boot in gateway but at the same time have a 10.7 emuNand... I tried some stuff with the firmeware90.bin but I think that didn't work.
I know it's sound a little bit weird: have a nice a9lh powerd system but still use gateway.. I like gateways cheat system and that should only be temporary until gateway supports a9lh
I hope you con help me

Boot your 10.7 system NAND from your emunand. Hold b in gateway menu then press a it will boot system NAND.

 

[Sonansune]

gw?
you should have a 9.0-9.2 sysnand with firm90.bin load up, and use gw.cia loader to enter 10.7 emunand

 

[reallybigfire]

Hey guys
i have a little question:
Some days ago I set up A9LH.
Everything works just fine.
I installed AuReinand with "update Sysnand mode" works fine too
But now I want to use my gateway card. I set up a 9.2 emuNand and I can launch gateway perfectly. So far so good.
But I want to play online an use some other stuff. Now I want so know how I can setup my emuNand to still boot in gateway but at the same time have a 10.7 emuNand... I tried some stuff with the firmeware90.bin but I think that didn't work.
I know it's sound a little bit weird: have a nice a9lh powerd system but still use gateway.. I like gateways cheat system and that should only be temporary until gateway supports a9lh
I hope you con help me

You, Sir, just officially made my month. This literally blew my mind off. I only knew of such way when I use this method to update from 4.5 to 9.2. BUT you sir, oh dear, blew my head off. Rep +inf

 

[GodSec]

Boot your 10.7 system NAND from your emunand. Hold b in gateway menu then press a it will boot system NAND.

Thank you very much
That worked perfectly

 

[Monty Kensicle]

Boot your 10.7 system NAND from your emunand. Hold b in gateway menu then press a it will boot system NAND.

I'm sorry but how do you boot into sysNAND from emuNAND?

 

[GodSec]

I'm sorry but how do you boot into sysNAND from emuNAND?

1. You need to go in the gateway menu
2. Go to the tap "boot gateway mode" (the first one)
3. That press and hold "b" the text should say "boot gateway Sysnand mode" than press "a"
4. Confirm with "x"
Wolla you are in Sysnand

 

[Monty Kensicle]

1. You need to go in the gateway menu
2. Go to the tap "boot gateway mode" (the first one)
3. That press and hold "b" the text should say "boot gateway Sysnand mode" than press "a"
4. Confirm with "x"
Wolla you are in Sysnand

How do you get there from 10.7 a9lh sysNAND? With that Gateway .CIA?

 

[GodSec]

How do you get there from 10.7 a9lh sysNAND? With that Gateway .CIA?

First of all you need to go in an 9.2 emuNand for using the exploit.
I personally use oothax to go in gateway menu but I have a new 3ds. I don't know if you can use HBL to boot in GW

 

[Monty Kensicle]

First of all you need to go in an 9.2 emuNand for using the exploit.
I personally use oothax to go in gateway menu but I have a new 3ds. I don't know if you can use HBL to boot in GW

There must be a way to load the Gateway menu in 10.7 sysNAND so you can avoid wasting space with an emuNAND.

 

[Reecey]

There must be a way to load the Gateway menu in 10.7 sysNAND so you can avoid wasting space with an emuNAND.

Not such a thing you cannot boot Gateway with a 10.7 firmware. It has to be on 9.2x, it always has been until they bring out >10.3 support.

Edit: I thought you had to downgrade your N3DS/3DSXL to 9.2x anyway to use anything now even CFW I thought? unless I am out of touch.

 

[GodSec]

Not such a thing you cannot boot Gateway with a 10.7 firmware. It has to be on 9.2x, it always has been until they bring out >10.3 support.

Edit: I thought you had to downgrade your N3DS/3DSXL to 9.2x anyway to use anything now even CFW I thought? unless I am out of touch.

I thought I can boot GW on 10.7 with the 9.0 firmware but it dont work

 

[Reecey]

I thought I can boot GW on 10.7 with the 9.0 firmware but it dont work

You can boot Gateway Emunand 10.7x on a systemnand on 9.0x or 9.2x but you can't boot Gateway emunand from a Systemnand that's on 10.7x the only option is to downgrade or wait until Gateway update there support to get up to 10.3x systemnand but I doubt 10.7x will get support anytime yet from the team. I hope I have explained myself a little better this time

 

[GodSec]

You can boot Gateway Emunand 10.7x on a systemnand on 9.0x or 9.2x but you can't boot Gateway emunand from a Systemnand that's on 10.7x the only option is to downgrade or wait until Gateway update there support to get up to 10.3x systemnand but I doubt 10.7x will get support anytime yet from the team. I hope I have explained myself a little better this time

Yes yes I know but in the GBAtemp post from aureinand it says that you can use other exploits (maybe GW?)
Now I boot GW menu in emuNand and from there Sysnand GW mode.
Thanks for your help.

 

[Reecey]

Yes yes I know but in the GBAtemp post from aureinand it says that you can use other exploits (maybe GW?)
Now I boot GW menu in emuNand and from there Sysnand GW mode.
Thanks for your help.

Sorry I'm not sure about other methods like aureinand I've been away from the 3ds section for along while.

 

[Monty Kensicle]

Not such a thing you cannot boot Gateway with a 10.7 firmware. It has to be on 9.2x, it always has been until they bring out >10.3 support.

Edit: I thought you had to downgrade your N3DS/3DSXL to 9.2x anyway to use anything now even CFW I thought? unless I am out of touch.

Yes you are out of touch, aureinand can be used on a sysNAND of 10.7 with a9lh.

 

[Reecey]

Yes you are out of touch, aureinand can be used on a sysNAND of 10.7 with a9lh.

Really? so you can now run roms etc.. and use online features with the latest firmware on a 3DS? I never thought that was possible. Have you got any info on this A9LH? So basically the 3ds is now cracked wide open on any firmware going and you can now do anything you want with it.

 

[Monty Kensicle]

Really? so you can now run roms etc.. and use online features with the latest firmware on a 3DS? I never thought that was possible. Have you got any info on this A9LH? So basically the 3ds is now cracked wide open on any firmware going and you can now do anything you want with it.

https://github.com/Plailect/Guide/wiki

This is the guide I used, very comprehensive. I've done this to 4 3DSes thus far. I had to move back to Menuhax after I found out there wasn't a simple way to boot Gateway mode.

 

[Quantumcat]

Really? so you can now run roms etc.. and use online features with the latest firmware on a 3DS? I never thought that was possible. Have you got any info on this A9LH? So basically the 3ds is now cracked wide open on any firmware going and you can now do anything you want with it.

You can't set it up straight from an updated sysNAND, you have to downgrade it first to 9.2, then to 2.1 to get console-specific keys, then restore backups. Luckily 10.7 is downgradeable but 10.8/11.0 may not be. Once you have a9lh theoretically you should be able to update whenever a new firmware comes out, be that 11.0, 12.0 or whatever.

 

[Deleted-236924]

https://github.com/Plailect/Guide/wiki

This is the guide I used, very comprehensive. I've done this to 4 3DSes thus far. I had to move back to Menuhax after I found out there wasn't a simple way to boot Gateway mode.

You can have a9lh and boot GW by having sysnand on 9.2 and booting with 9.0 firm by holding L on boot (requires firmware90.bin), then running your GW exploit of choice through that.