Hacking COMPLETED Fusee-LEDE Dongle (6$ payload injector)

FGFlann

Well-Known Member
Member
Joined
Nov 10, 2015
Messages
664
Trophies
0
XP
1,422
Country
I followed these steps, and have been met with no success.
The payload is not injected on boot, and the SSID is not being broadcast anymore. I seem to have simply bricked the tiny thing. Any ideas? I don't have an ethernet port and don't really feel like dropping cash on an adapter on something that might not work.
If you flashed uboot you can put one of the later firmwares with wifi enabled on a FAT formatted flash drive, insert it into the dongle and turn it on while holding the reset button. It might take a few tries but eventually it should reflash it.
 
  • Like
Reactions: OkazakiTheOtaku

OkazakiTheOtaku

no thanks, I don't want a custom title
Member
Joined
Jul 20, 2016
Messages
1,461
Trophies
1
Location
127.0.0.1
XP
3,114
Country
Japan
If you flashed uboot you can put one of the later firmwares with wifi enabled on a FAT formatted flash drive, insert it into the dongle and turn it on while holding the reset button. It might take a few tries but eventually it should reflash it.
So, I just tried that and have some fun flashing LED lights but unfortunately the guide that came with it is entirely in Chinese.
I think I flashed uboot successfully; it did and said exactly what the guide told me. But ever since I rebooted it, it does not want to broadcast anything.

Huh, while I was typing the above paragraph some new stuff happened. Now it's broadcasting "3GWIFI_XXXX" (like, it actually has the Xs, it's not just a placeholder) but the password thats printed on it isn't working. I used your most recent firmware.bin. Do you know what it is?
 

FGFlann

Well-Known Member
Member
Joined
Nov 10, 2015
Messages
664
Trophies
0
XP
1,422
Country
So, I just tried that and have some fun flashing LED lights but unfortunately the guide that came with it is entirely in Chinese.
I think I flashed uboot successfully; it did and said exactly what the guide told me. But ever since I rebooted it, it does not want to broadcast anything.

Huh, while I was typing the above paragraph some new stuff happened. Now it's broadcasting "3GWIFI_XXXX" (like, it actually has the Xs, it's not just a placeholder) but the password thats printed on it isn't working. I used your most recent firmware.bin. Do you know what it is?
It's 12345678

Glad it's working. :) Enjoy!
 
  • Like
Reactions: OkazakiTheOtaku

OkazakiTheOtaku

no thanks, I don't want a custom title
Member
Joined
Jul 20, 2016
Messages
1,461
Trophies
1
Location
127.0.0.1
XP
3,114
Country
Japan
It's 12345678

Glad it's working. :) Enjoy!
That's not it :(
vAEwT0B.png
 

FGFlann

Well-Known Member
Member
Joined
Nov 10, 2015
Messages
664
Trophies
0
XP
1,422
Country
I refreshed your firmware and while the password still isn't working on my laptop, it did work on my phone. But when I try to telnet into 10.1.5.1 it is refusing the connection.
Lede uses SSH instead of Telnet so you need to switch to an SSH client. At this point you don't need to though. You can switch payloads using the usb method or by connecting to the SSH port with an SCP client.
 
  • Like
Reactions: OkazakiTheOtaku

OkazakiTheOtaku

no thanks, I don't want a custom title
Member
Joined
Jul 20, 2016
Messages
1,461
Trophies
1
Location
127.0.0.1
XP
3,114
Country
Japan
Lede uses SSH instead of Telnet so you need to switch to an SSH client. At this point you don't need to though. You can switch payloads using the usb method or by connecting to the SSH port with an SCP client.
Alright, I SSH'd in as root, changed the payload, tested it on my switch (it worked) and then...when I disconnect the router from power and reconnect it to power, it doesn't boot again, like before. argh.
Any ideas?

EDIT: When it boot loops like this, both the red and blue lights are on, fwiw
 

FGFlann

Well-Known Member
Member
Joined
Nov 10, 2015
Messages
664
Trophies
0
XP
1,422
Country
Alright, I SSH'd in as root, changed the payload, tested it on my switch (it worked) and then...when I disconnect the router from power and reconnect it to power, it doesn't boot again, like before. argh.
Any ideas?

EDIT: When it boot loops like this, both the red and blue lights are on, fwiw
This is new behaviour to me, must be a quirk or fault with your device.
 
  • Like
Reactions: OkazakiTheOtaku

PC_Arcade

Well-Known Member
Newcomer
Joined
Nov 2, 2008
Messages
47
Trophies
1
XP
544
Country
United States
OK, so I screwed up, I edit the config files manually from h t t p s://github.com/ijuintekka/fusee-a5 but wired access no longer works for me. I think the easiest way for me to sort this is just to flash the firmware.bin.
I put it on a usb stick and inserted it into the unit, but I can't see it anywhere what's the easiest way to reflash the firmware?

I've got access via wifi and can ssh from there just fine :)

[edit] I should also add that I'm shit with Linux so instructions for an idiot would be good ;)
 
Last edited by PC_Arcade,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • SylverReZ @ SylverReZ:
    @mthrnite, Cheetah Girls, the sequel to Action 52's Cheetah Men.
    +2
  • Psionic Roshambo @ Psionic Roshambo:
    Pokemon Black I played that one a lot
  • K3Nv2 @ K3Nv2:
    Honestly never messed with Pokémon on ds much
  • mthrnite @ mthrnite:
    I played pokemon once, was bored, never tried again
  • Psionic Roshambo @ Psionic Roshambo:
    Oh Dragon Quest IX
  • K3Nv2 @ K3Nv2:
    Spent like 5 hours on switch one never touched it again
  • Psionic Roshambo @ Psionic Roshambo:
    Sentinel of the stary skies
  • K3Nv2 @ K3Nv2:
    Ds is 20 years old this year
  • Psionic Roshambo @ Psionic Roshambo:
    So MJ no longer wants to play with it?
  • K3Nv2 @ K3Nv2:
    He put it down when the 3ds came out
  • SylverReZ @ SylverReZ:
    @K3Nv2, RIP Felix does great videos on the PS3 yellow-light-of-death.
  • Jayro @ Jayro:
    Eventhough the New 3DS XL is more powerful, I still feel like the DS Lite was a more polished system. It's a real shame that it never got an XL variant keeping the GBA slot. You'd have to go on AliExpress and buy an ML shell to give a DS phat the unofficial "DS Lite" treatment, and that's the best we'll ever get I'm afraid.
    +1
  • Jayro @ Jayro:
    The phat model had amazingly loud speakers tho.
    +1
  • SylverReZ @ SylverReZ:
    @Jayro, I don't see whats so special about the DS ML, its just a DS lite in a phat shell. At least the phat model had louder speakers, whereas the lite has a much better screen.
    +1
  • SylverReZ @ SylverReZ:
    They probably said "Hey, why not we combine the two together and make a 'new' DS to sell".
  • Veho @ Veho:
    It's a DS Lite in a slightly bigger DS Lite shell.
    +1
  • Veho @ Veho:
    It's not a Nintendo / iQue official product, it's a 3rd party custom.
    +1
  • Veho @ Veho:
    Nothing special about it other than it's more comfortable than the Lite
    for people with beefy hands.
    +1
  • Jayro @ Jayro:
    I have yaoi anime hands, very lorge but slender.
  • Jayro @ Jayro:
    I'm Slenderman.
  • Veho @ Veho:
    I have hands.
    Veho @ Veho: +1