Hardware Fake Pro controller

[vitalka]

WHen i press Home then Xbox game bar appears. No online detection are coming

 

[Ductran216]

I connect the controller to pc. When I press home + X + Y the controller is disconnected and pc starts to setup controller. Then my controller won't response at all. The lights are not blinking or red charging light turning on. It's completely dead. Any one know how to fix this

 

[Morricorne]

If anyone want full working 3rd party pro controller. Just buy something like this one. I have this and everything work like charm. Gyrpscope too in BOTW now on switch v1 and previously on switch lite.
https://www.euro.com.pl/kontrolery-do-gier/lin-pad-bezprzew-nsw-cobra-pro-contro-qsp500.bhtml

 

[Dust2dust]

If anyone want full working 3rd party pro controller. Just buy something like this one. I have this and everything work like charm. Gyrpscope too in BOTW now on switch v1 and previously on switch lite.
https://www.euro.com.pl/kontrolery-do-gier/lin-pad-bezprzew-nsw-cobra-pro-contro-qsp500.bhtml

Your link says "Access denied" for me. Maybe only (and strictly) for european market?

 

[Ductran216]

An update to my situatuon: I connect it to pc via usb cable, windows detected it and install driver successfully, but the controller still not working. I guess it's not the battery's fault, maybe error with the firmware? I'm unable to update any firmware at all. So anyone has any idea, please help

WHen i press Home then Xbox game bar appears. No online detection are coming

 

[Morricorne]

Your link says "Access denied" for me. Maybe only (and strictly) for european market?

I don't know why. Anyway this Pad is called Cobra QSP500
I use this Pad around 6 month now. No problem. Now with switch v1 and previously with switch lite

 

[Liriel]

When I would not know that this is a fake then I would think it's original.
Outside seems legit and every hint like missing switch Logo is not there.
Even the Vibration and wake up or sync with cable is there.

But inside is a Version 2.2 Board and Smartphone Vibration motors

 

[AceCuba]

Hey can s

The fake pro controller improve with the latest version!
The board is more like the original and no expoxid Chips.
Very clean and good Hardware.
All works normal and the motion Sensors works fine.
But No Nfc ( i dont need it) and normal rumble.
Normal analog sticks are inside that normal caps or xbox elite caps works.
The Notification LED is missing but There is no Use until now.
I think it can solder in Because the points and resistors points exist on the board.


The Plastik feels really good and i can say good Tool with that the Plastic is made.
PS. Thats my Job to make These Tool to Make Plastic parts.
I think they Use the Same Tools for it like nintendo but only without nintendo Insert.


Only the switch logo on top is missing and the nintendo Logo on the bottom.
The screw are the right too and they had the secret Message too.

All other imprints are There like Support.nintendo.com or made in germany. [emoji1787]

I will try to solder HD rumble on it to See what happens.

Normal analog sticks are inside that normal caps or xbox elite caps works.

Cost 21€.


Gesendet von meinem Huawei P10 mit Tapatalk

Hey some one knows the value of the R17 resistor next to the analog . I got a pro controller that don't work using the battery that resistors si blown. Work using 4.7k but wanna know the original value

Post automatically merged: Jul 19, 2023

This resistors r17

 

[Liriel]

So I replace the old Vibration motors against these

Like in the newer clone and the are more natural and not loud

 

[Liriel]

so new Fake Controller in Gold Monster Hunter and for me a new board.
All Features exist with only one missing the Amiibo scanner.

2322
20220224 NS Pro V1.60

20220224 would bei 24 02 2022

What i see is that is that the Parts on the PCB are less then my last Verion.


I am at the Moment to get original Boards from Nintendo an put them in the Fake Controllers.
To Make them Supported and to update Hardware.
Cheaper then get the Special Edition Pro Controller from Nintendo.

I desolder the Analog sticks and use them because they working without problems.
what i make with the Fake PCB? i dont know

 

[paulo767new]

hey anyone here still has the beboncool updater? i cant find it anywhere

Post automatically merged: Oct 20, 2024

hey anyone here still has the beboncool updater? i cant find it anywhere

 

[RoxyUwU]

I found the link for the beboncool firmware.
https://web.archive.org/web/20210917041051/https://www.beboncool.com/download/5129/

And the link for the insten firmware.
https://cdn.shopify.com/s/files/1/0500/3521/files/Firmware_Update.exe?v=1620801767

The tutorial I made 3 years ago may be diferent right now, IDK if the controllers changed internally, or the chips used are different. I am not responsible for any try to update the firmware, and not working.

 

[scubaslim]

Anybody know how to get the Insten controller out of "firmware update mode". I tried it and now it's basically dead