Same thing happened to me, and deactivating the cheats did nothing since they still worked. I tried the solution stated above but my switch kept saying that there was an error in atmosphere and that I should reboot it, which i couldnt. It only worked again once i deleted that ini file from the configure folder. I even tried to delete Edizon because i couldnt go pass Yaldabaoth in Xenoblade Chronicles and it wasnt until i deleted the exact cheat for Xenoblade Chronicles that it worked and I could play normally. Honestly idk why it happens but I found out that deleting the cheat might be the best choice.
Hi,
I have the problem, that every time i start a game edizon activates all cheat codes.
What I tried so far:
Start the game.
Go back to edizon.
Deactivate all cheats.
Go back to the game.
Play a little bit.
Save the game.
Kill the game.
Restart the game, but all cheats are active again.
If you have any old atmosphere version files, they should already contain a 'system_settings.ini' file in 'config' folder. I think you should use an earlier version of the atmosphere like the one used to run CFW 9.0 onwards. Any how, you can simple replace the 'system_settings.ini' file from the old one to your new atmosphere 'config' folder. Also, dont forget to delete the 'system_settings.ini' file in 'config_templates' folder that is there in the new atmosphere folder. This helped me.... hope it helps you guys too .
sdcard:\atmosphere\config\system_settings.ini
if
A) this file exist, look for this line:
Code:
; dmnt_cheats_enabled_by_default = u8!0x1
change that to:
Code:
dmnt_cheats_enabled_by_default = u8!0x0
notice that the ";" is gone, and that "u8!0x1" is now "u8!0x0"
after saving the changes, try the game again.
----------------------------------------------------------------------------------
B) this file does not exist, there should a "atmosphere\config_templates\system_settings.ini"
copy that to "atmosphere\config\system_settings.ini" then goto Option A
----------------------------------------------------------------------------------
C) If somehow, you delete "atmosphere\config_templates",(like i did once)
copy and paste what in the spoiler to a file called "system_settings.ini" and put that in "atmosphere\config". now bear in mind, this has the default setting for everything except one thing. there are no comment lines, this is the "bare-bones" minimum to get you started.
@Gamerjin can you help me out with this?
It was good on mine older AMS 14.0.4 but now i update to 16.0.2 it start to enable cheat auto again.
i have done everything you mention above but still the same.
Mine confiq ini look like this
; Disable uploading error reports to Nintendo
[eupld]
; upload_enabled = u8!0x0
; Control whether RO should ease its validation of NROs.
; (note: this is normally not necessary, and ips patches can be used.)
[ro]
; ease_nro_restriction = u8!0x1
; Atmosphere custom settings
[atmosphere]
; Reboot from fatal automatically after some number of milliseconds.
; If field is not present or 0, fatal will wait indefinitely for user input.
; fatal_auto_reboot_interval = u64!0x0
; Make the power menu's "reboot" button reboot to payload.
; Set to "normal" for normal reboot, "rcm" for rcm reboot.
; power_menu_reboot_function = str!payload
; Controls whether dmnt cheats should be toggled on or off by
; default. 1 = toggled on by default, 0 = toggled off by default.
; dmnt_cheats_enabled_by_default = u8!0x0
; Controls whether dmnt should always save cheat toggle state
; for restoration on new game launch. 1 = always save toggles,
; 0 = only save toggles if toggle file exists.
; dmnt_always_save_cheat_toggles = u8!0x0
; Enable writing to BIS partitions for HBL.
; This is probably undesirable for normal usage.
; enable_hbl_bis_write = u8!0x0
; Enable reading the CAL0 partition for HBL.
; This is probably undesirable for normal usage.
; enable_hbl_cal_read = u8!0x0
; Controls whether fs.mitm should redirect save files
; to directories on the sd card.
; 0 = Do not redirect, 1 = Redirect.
; NOTE: EXPERIMENTAL
; If you do not know what you are doing, do not touch this yet.
; fsmitm_redirect_saves_to_sd = u8!0x0
; Controls whether to enable the deprecated hid mitm
; to fix compatibility with old homebrew.
; 0 = Do not enable, 1 = Enable.
; Please note this setting may be removed in a
; future release of Atmosphere.
; enable_deprecated_hid_mitm = u8!0x0
[hbloader]
; Controls the size of the homebrew heap when running as applet.
; If set to zero, all available applet memory is used as heap.
; The default is zero.
; applet_heap_size = u64!0x0
; Controls the amount of memory to reserve when running as applet
; for usage by other applets. This setting has no effect if
; applet_heap_size is non-zero. The default is 0x8600000.
; applet_heap_reservation_size = u64!0x8600000
i have done it but it's still the same problem.
This is what it looks like now
SD\atmosphere\config_templates/system_settings
; dmnt_cheats_enabled_by_default = u8!0x0
i have done it but it's still the same problem.
This is what it looks like now
SD\atmosphere\config_templates/system_settings
; dmnt_cheats_enabled_by_default = u8!0x0
sdcard:\atmosphere\config\system_settings.ini
if
A) this file exist, look for this line:
Code:
; dmnt_cheats_enabled_by_default = u8!0x1
change that to:
Code:
dmnt_cheats_enabled_by_default = u8!0x0
notice that the ";" is gone, and that "u8!0x1" is now "u8!0x0"
after saving the changes, try the game again.
(you may need to reboot the switch, if it doesnt look like it working....)
----------------------------------------------------------------------------------
B) this file does not exist, there should a "atmosphere\config_templates\system_settings.ini"
copy that to "atmosphere\config\system_settings.ini" then goto Option A
----------------------------------------------------------------------------------
C) If somehow, you delete "atmosphere\config_templates",(like i did once)
copy and paste what in the spoiler to a file called "system_settings.ini" and put that in "atmosphere\config". now bear in mind, this has the default setting for everything except one thing. there are no comment lines, this is the "bare-bones" minimum to get you started.
Thanks so much! Read other responses but I always ran into problems. Your answer was very simple to understand and fixed my problem! Now I don't have to play Skyward Sword with everything maxed from the very beginning.
I'm having the same problem, I changed it from 1 to 0 in the system settings file a few months ago.. which worked.
But recently it's always activating the cheats again, I can't even turn them off. When I go into Edizon and untick them all, go back into the game and the cheats are still active. Checked my system settings file and it's still set to 0.
Really confused, I'm running Switch Version 9.0.1 (haven't updated in a while, so no idea why it stopped working) and Edizon 3.1.0
Hello guys, I am also having this issue, I already changed the config file and rebooted, but it continues to happen, whenever I launch the game all the cheats are on, and it breaks it. I tried to change the cheats using the Breeze tool along with Edizon, and turning off Tesla module, but no success either
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The romhacking community is always a source for new ways to play retro games, from completely new levels or stages, characters, quality of life improvements, to flat...
Retro handheld manufacturer Anbernic is releasing a refreshed model of its RG35XX handheld line. This new model, named RG35XX 2024 Edition, features the same...
It's the first Nintendo Switch firmware update of 2024. Made available as of today is system software version 18.0.0, marking a new milestone. According to the patch...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Yet another casualty goes down in the never-ending battle of copyright enforcement, and this time, it hit a big website which was the host for many fangames based and...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...