See https://github.com/Plailect/Guide/wiki/Hardmod-Downgrade

 

[cravas]

Only possible to downgrade with a original bought version of "Field Runners" trough eShop.

Check this:

https://github.com/Plailect/Guide/wiki/Firmware-Downgrade

 

[zazor5000]

What cables can i use? can i rip 4 pins from old floppy disk cable?

 

[tvall]

What cables can i use? can i rip 4 pins from old floppy disk cable?

thats what i did. works great

Only possible to downgrade with a original bought version of "Field Runners" trough eShop.

Check this:

https://github.com/Plailect/Guide/wiki/Firmware-Downgrade

dsiwarehax or a hardmod, according to that page. and this thread is about the hardmod method, so.... your point is?

 

[cravas]

Didn't quote @atkfromabove post, was replying to him.

Only point is, Hardmod is not entirely needed,

 

[bamboori]

I have a 2DS with OFW 11.0.0-33E and Menuhax installed for some homebrew as well as a NDS flash cart for said games. I also have everything I need to do a hardmod in order to downgrade. My question is: How likely do you guys think it is that there soon will be a softmod for 11.0.0-33? I still have plenty of games to play to kill time, so I'm not in dire need of a hardmod.

 

[zazor5000]

I have a 2DS with OFW 11.0.0-33E and Menuhax installed for some homebrew as well as a NDS flash cart for said games. I also have everything I need to do a hardmod in order to downgrade. My question is: How likely do you guys think it is that there soon will be a softmod for 11.0.0-33? I still have plenty of games to play to kill time, so I'm not in dire need of a hardmod.

DSiWare

 

[bamboori]

DSiWare

if I knew somebody with a CFW 3ds sure, I do not. or is there a method I didn't find that doesn't require a second, CFW running 3ds?

 

[DKB]

if I knew somebody with a CFW 3ds sure, I do not. or is there a method I didn't find that doesn't require a second, CFW running 3ds?

Not at the moment.

 

[F0L]

For users who do not speak Italian to make an account on Reboot.ms, the instructions and files have been re-added to the main guide.

https://github.com/Plailect/Guide/wiki/Hardmod-Downgrade

Hi,

I wonder if you can help. I have tried following this to the letter, everytime autofirm makes backup and does something to the nand dump but it never works once flashed back to O3DS. The kernel and firm version is still the same (2.51-25) and trying to perform firmware downgrade fails to start (unable to get am:u handle).
I have tried following reboot.ms guides, the guide you posted and youtube vids. They all do exactly what I did, but mine never ever works.

My firmware version is 11.1.0.34-E running Freakyhax as entry point.

 

[simon66]

Hi,

I wonder if you can help. I have tried following this to the letter, everytime autofirm makes backup and does something to the nand dump but it never works once flashed back to O3DS. The kernel and firm version is still the same (2.51-25) and trying to perform firmware downgrade fails to start (unable to get am:u handle).
I have tried following reboot.ms guides, the guide you posted and youtube vids. They all do exactly what I did, but mine never ever works.

My firmware version is 11.1.0.34-E running Freakyhax as entry point.

5. Verify that the following:

• Kernel version: 2.50-11
• FIRM version: 2.50-11
• If either of these do not display the versions above, something has gone wrong and you should try again from the beginning

Did you patch your NAND dump? If you did, then you wrote the wrong file to the 3DS or the patch didn't work.

As you can see in the Link bellow, your "FIRM version" is not on 10.4 (Which is necessary for sysDowngrader and any downgrader).
https://www.3dbrew.org/wiki/FIRM#NATIVE_FIRM

I rewrote the autofirm and added validation (Since the original one doesn't have any validation). I might upload it (I'll prob just tell @Plailect to implement it on his).

== Update ==

I've uploaded it to my git and did a pull request to @Plailect
https://github.com/simon66/autofirm

Rename the firm files like this and you should be fine
https://github.com/simon66/autofirm/blob/master/source/firmwares/README

 

[F0L]

Did you patch your NAND dump? If you did, then you wrote the wrong file to the 3DS or the patch didn't work.

As you can see in the Link bellow, your "FIRM version" is not on 10.4 (Which is necessary for sysDowngrader and any downgrader).
https://www.3dbrew.org/wiki/FIRM#NATIVE_FIRM

I rewrote the autofirm and added validation (Since the original one doesn't have any validation). I might upload it (I'll prob just tell @Plailect to implement it on his).

== Update ==

I've uploaded it to my git and did a pull request to @Plailect
https://github.com/simon66/autofirm

Rename the firm files like this and you should be fine
https://github.com/simon66/autofirm/blob/master/source/firmwares/README

Renamed files, done exactly as you have said. Still the same, it never ever patches it. I have tried 11.1 to 10.4 firmware files, MD5 hash check out, so they are correct files.
Nothing works. I know something is being done to the NAND.bin as the # chances.

 

[vb_encryption_vb]

Renamed files, done exactly as you have said. Still the same, it never ever patches it. I have tried 11.1 to 10.4 firmware files, MD5 hash check out, so they are correct files.
Nothing works. I know something is being done to the NAND.bin as the # chances.

Ive had this problem before. Patch the file that is created after the initial patch.

 

[F0L]

Ive had this problem before. Patch the file that is created after the initial patch.

Nope. Gives error straight away saying its already patched.

Sent from my SM-G900F using Tapatalk

 

[vb_encryption_vb]

Nope. Gives error straight away saying its already patched.

Sent from my SM-G900F using Tapatalk

You have to delete, nand.bin, rename nand_patched.bin to nand.bin.

 

[F0L]

You have to delete, nand.bin, rename nand_patched.bin to nand.bin.

I aready did that. Still the same.

Let me try something. Might be why your idea isnt working.

Sent from my SM-G900F using Tapatalk

 

[F0L]

Ok. Ran out of space. Repatched again as you said flashing now.

Sent from my SM-G900F using Tapatalk

 

[F0L]

Nope. Still the same. Kernel has not changed.

Sent from my SM-G900F using Tapatalk

 

[vb_encryption_vb]

Nope. Still the same. Kernel has not changed.

Sent from my SM-G900F using Tapatalk

You do know that on screen the kernel will not change correct?

 

[F0L]

Your talking about version. Dsident, shows kernel as per downgrade guide.
Still on old kernel, .

Sent from my SM-G900F using Tapatalk

 

[F0L]

Is there anyway to check nand dump. As im guessing its encrypted. Viewing with hex editor shows nothing useful.

Sent from my SM-G900F using Tapatalk