Gaming Computer Not Detecting Portable Hard Drive?

  • Thread starter Thread starter EpicJungle
  • Start date Start date
  • Views Views 3,095
  • Replies Replies 16

EpicJungle

stop browbeating me can't you see i'm sexy
Member
Joined
Aug 28, 2009
Messages
1,002
Solutions
2
Reaction score
4
Trophies
2
XP
397
Country
Canada
My 110gb WD Passport has a few problems,
corrupting files, taking years to copy/paste/move files.




Don't suggest anything that involves erasing files; I have files that add up to 80gb :|

But now, the computer starts not detecting the hard drive
hate2.gif

Yay it detects it for some random reason
tongue.gif
 
GAHH NOOO

THOSE HARD DRIVES COST LIKE, 2198128970 DOLLARS
 
I have a MyPassport 250GB and usually I have to plug it into my hard drive then into my computer in order for it to detect though. It's a stupid little solution though and is probably only in my case.

But seeing all the problems you're having though it could be a more serious problem. Sad to say if it's crapping out you may as well get a new one. 80GB ones aren't too expensive really. They're decently cheap on Newegg at least. I don't know any online stores based mainly for Canada though, so sorry about that. But we've got a bunch of Canadians here and surely one will recommend you one.
 
To me it either seems like the hard drive is failing or that you have some problems with the USB connection between it and the HDD. In the first case there's not much to do other than to abandon the drive and save what you can to another drive.

If it's the second case then it could be as simple as changing USB cable/changing USB port or opening up the enclosure, extract the drive and then install it inside your computer or in a new enclosure.
Guild McCommunist said:
But seeing all the problems you're having though it could be a more serious problem. Sad to say if it's crapping out you may as well get a new one. 80GB ones aren't too expensive really. They're decently cheap on Newegg at least. I don't know any online stores based mainly for Canada though, so sorry about that. But we've got a bunch of Canadians here and surely one will recommend you one.
http://www.newegg.ca/?
 
Actually the topic creator is not asking anything, so what does he want...?

It's obvious the drive is (soon) hosed, keeping backups is good practice.

If the op wants 'pro' suggestions, seal the drive in a watertight bag and put it in a freezer half an hour, and see if you can backup the most important files afterwards. Not kidding. No guarantees. You can mess up.
 
Strider said:
Actually the topic creator is not asking anything, so what does he want...?

It's obvious the drive is (soon) hosed, keeping backups is good practice.

If the op wants 'pro' suggestions, seal the drive in a watertight bag and put it in a freezer half an hour, and see if you can backup the most important files afterwards. Not kidding. No guarantees. You can mess up.

Since your drive is crapping out, might as well try this. And yes, your drive is on it's way out the door. Sorry.
 
Have you tried a shorter USB cable? I have a problem with my passport not detecting sometimes, and it's due to the USB cable being too crappy/short. These drives need just the right amount of power to start up.
 
This is exactly why I avoid WD Products
biggrin.gif

Seagate have yet to fail me, all the WD drives I've had have bricked themselves.


Chances are that either:
A) You've damaged the HDD (dropping etc..)
B) You've broken the USB interface
C) USB Cable is broken
D) Drivers shitbricked themselves

if it's A, you're fucked
if it's B or C, you'll need to replace them, I suggest ditching the badly made WD case and getting a cheap 2.5" Enclosure/Caddy. Or hook it up internally.
if it's D, open up Device Management, uninstall all WD MyPassport related drivers, install the stock ones off their website, reboot, then try again. If this fails, its gonna be one of the other 3.
 
Is it not being recognized, or is Windows just not assigning it a drive letter? Try opening Disk Management and see if your drive is there. If it's there but not showing in My Computer, just assign it a drive letter and open it up.
 
shaunj66 said:
Have you tried a shorter USB cable? I have a problem with my passport not detecting sometimes, and it's due to the USB cable being too crappy/short. These drives need just the right amount of power to start up.

I tried sooo much USB cables... All of them act the same..




Antoligy said:
This is exactly why I avoid WD Products
biggrin.gif

Seagate have yet to fail me, all the WD drives I've had have bricked themselves.


Chances are that either:
A) You've damaged the HDD (dropping etc..)
B) You've broken the USB interface
C) USB Cable is broken
D) Drivers shitbricked themselves

if it's A, you're fucked
if it's B or C, you'll need to replace them, I suggest ditching the badly made WD case and getting a cheap 2.5" Enclosure/Caddy. Or hook it up internally.
if it's D, open up Device Management, uninstall all WD MyPassport related drivers, install the stock ones off their website, reboot, then try again. If this fails, its gonna be one of the other 3.

Aha, my parent bought the WD Passport cause it was on sale
wink.gif


A) I never ever dropped it or damaged it in any way :| We barely use it; it's only for backup..
B) I don't think so, when i plug it the blue light turns on
C) Tried soo much USB cables, and they all work with other sturff :|
D) I can't see any related drives in Device Managment



QUOTE(Skyline969 @ Aug 6 2010, 04:42 AM)
Is it not being recognized, or is Windows just not assigning it a drive letter? Try opening Disk Management and see if your drive is there. If it's there but not showing in My Computer, just assign it a drive letter and open it up.

Can't see it anywhere on Disk Management...
I guess it's not recognizing it..?


____

If this helps, there's a blue light that goes on whenever I connect the WD Passport.
 
Crazzy1 said:
If this helps, there's a blue light that goes on whenever I connect the WD Passport.
On the drive you mean? That's good, because that means it's receiving power. Put your ear to it and plug it in... can you hear the drive spinning at all? If not, the enclosure may be fine but the hard disk inside is done for.
 
Skyline969 said:
Crazzy1 said:
If this helps, there's a blue light that goes on whenever I connect the WD Passport.
On the drive you mean? That's good, because that means it's receiving power. Put your ear to it and plug it in... can you hear the drive spinning at all? If not, the enclosure may be fine but the hard disk inside is done for.

Yep, I hear the drive spin.
Sometimes it starts making a clicking sound loud enough so that I don't have to put my ear to it.
But good news: NOW THE COMPUTER DETECTS IT
... for some reason...
unsure.gif


Now, who can help me with the copying/moving/pasting/corrupting problem
tongue.gif
 
Ah, does it sound like this? http://en.wikipedia.org/wiki/File:WD_bad_h...ck_of_death.ogg
if so, you're done for.

If not, there's still hope (that it's just a filesystem thing). Some clicks can be caused by the spinning causing the HDD to vibrate within it's case/whatever it's resting on, and in some cases are fixable using bubble-wrap.
 
Antoligy said:
Ah, does it sound like this? http://en.wikipedia.org/wiki/File:WD_bad_h...ck_of_death.ogg
if so, you're done for.

If not, there's still hope (that it's just a filesystem thing). Some clicks can be caused by the spinning causing the HDD to vibrate within it's case/whatever it's resting on, and in some cases are fixable using bubble-wrap.

Nope, a different click *sigh of relief*

But the computer detects it now... But there's still this problem with taking years to copy/paste/move stuff into/out of the WD Passport..
How can I fix it..?
 

Site & Scene News

Popular threads in this forum