Hacking cIOSCORP v3.4 Release!

[Tux']

Lol DaMummy. Anyways, Bootmii is an ABSOLUTE MUST! I capatalized that because it is. You need it. Especially if you can get it as boot2.

 

[damysteryman]

@shiroitaka
Yes, bootmii is HIGHLY recommended, especially if installing cIOSCORP. The reason why preloader gives "system menu files are corrupted" screen is because the system menu IOS needs to have the ES_Identify function patched for preloader to work with it.

And it sounds like you either don't have cIOS249 installed, or it is a stub. Try running the cIOS rev14 installer, and if that works, try installing cIOSCORP again. If it doesn't install, report what error code it gives you, so we know what to do next.

The the "system menu IOS" seting in preloader should (usually) be set to 60 for 4.1x, and 70 for 4.2x.

Hope this helps.

 

[nknave]

Actually if you have a STUB, it will not load (black screen), if you have Preloader installed on 4.2 SM, and it's the new JODI Patched, it will use IOS70 automaticly and you'll get this corruption message.

Install cIOS60 found in cIOSCorp v3.4 at least and have Preloader use that IOS for System Menu, and it will load just fine.

 

[Bloodlust]

Actually if you have a STUB, it will not load (black screen), if you have Preloader installed on 4.2 SM, and it's the new JODI Patched, it will use IOS70 automaticly and you'll get this corruption message.

Install cIOS60 found in cIOSCorp v3.4 at least and have Preloader use that IOS for System Menu, and it will load just fine.

So, getting JODI patched preloader to work under 4.2SM doesn't require a DOP ios70 anymore?

 

[xzxero]

Actually if you have a STUB, it will not load (black screen), if you have Preloader installed on 4.2 SM, and it's the new JODI Patched, it will use IOS70 automaticly and you'll get this corruption message.

Install cIOS60 found in cIOSCorp v3.4 at least and have Preloader use that IOS for System Menu, and it will load just fine.

So, getting JODI patched preloader to work under 4.2SM doesn't require a DOP ios70 anymore?

no.

but the whole point of 4.2 is for the system menu to run off IOS70, not IOS60.

So you need to have ES_Identify enabled on IOS70 for it to work correctly.

anyways, ive tested cCORP 3.5's IOS70 and it works fine with preloader.

 

[shiroitaka]

I have now installed bootmii now on boot2 and rev14 will reinstall 3.5, will I need to reinstall rev14 again after install?

@shiroitaka
Yes, bootmii is HIGHLY recommended, especially if installing cIOSCORP. The reason why preloader gives "system menu files are corrupted" screen is because the system menu IOS needs to have the ES_Identify function patched for preloader to work with it.

And it sounds like you either don't have cIOS249 installed, or it is a stub. Try running the cIOS rev14 installer, and if that works, try installing cIOSCORP again. If it doesn't install, report what error code it gives you, so we know what to do next.

The the "system menu IOS" seting in preloader should (usually) be set to 60 for 4.1x, and 70 for 4.2x.

Hope this helps.

 

[shiroitaka]

Okay reinstalled 3.5, still no joy fatal frame and wii fit plus all lock up on a black screen from disc channel and HBC is upside down

 

[iamwally]

Is cioscorp 3.5 released yet? I cannot seem to find it anywhere.

Thanks,

iamwally

 

[KiiWii]

Is cioscorp 3.5 released yet? I cannot seem to find it anywhere.

Thanks,

iamwally

QUOTEcIOSCORP v3.5 is in testing phase. It should be released soon.

 

[razorback78]

is 3.5 released? xzxero stated that he had already tested ios70 of cioscorp 3.5. so is released? do we have to mail again? thanks. can't wait brick. lol

 

[shiroitaka]

In testing at the moment, I am beta testing it

still a few gripes but otherwise ok

 

[razorback78]

In testing at the moment, I am beta testing it

still a few gripes but otherwise ok

i understand...and btw thanks for all your efforts for this great project. looking forward for it.

 

[urherenow]

Okay reinstalled 3.5, still no joy fatal frame and wii fit plus all lock up on a black screen from disc channel and HBC is upside down

Why is HBC upside down? Is yours using IOS61? It should be. use DoP-IOS to install IOS61 without patching it at all, then uninstall and reinstall HBC.

cIOSCORP does not mess with IOS61 at all so it's probably your fault

. Only the shop channel (and HBC) uses it so there's no point in messing with it (other than making sure it's up to date... but without patching anything).

 

[shiroitaka]

It is my fault in trying a couple of solutions to get everything working but sadly still wont play some games through disc channel, I can through neogamma I just hate it messing up the screen colours when i use my RGB cable whilst through disc channel they remain ok

Okay reinstalled 3.5, still no joy fatal frame and wii fit plus all lock up on a black screen from disc channel and HBC is upside down

Why is HBC upside down? Is yours using IOS61? It should be. use DoP-IOS to install IOS61 without patching it at all, then uninstall and reinstall HBC.

cIOSCORP does not mess with IOS61 at all so it's probably your fault

. Only the shop channel (and HBC) uses it so there's no point in messing with it (other than making sure it's up to date... but without patching anything).

 

[FiveseveN]

I have a Wii 4.2U I am not using cIOSCORP on it atm. Before pressing search and reading on how to update safely to 4.2 I just let the System Update go and do its thing. After going through getting homebrew on it and bootmii back up as boot2 I forgot I had cIOSCORP on my Wii. I am currently playing my back-ups through Neogamma back up loader.

Since I previously on 4.1 had cIOSCORP v3.4 installed on my Wii is it necessary to Uninstall it since I am already on 4.2? I just want to know if it is something I should consider in order for the next release of cIOSCORP to go smoothly. I want to avoid headaches!

 

[dajavax]

I have a Wii 4.2U I am not using cIOSCORP on it atm. Before pressing search and reading on how to update safely to 4.2 I just let the System Update go and do its thing. After going through getting homebrew on it and bootmii back up as boot2 I forgot I had cIOSCORP on my Wii. I am currently playing my back-ups through Neogamma back up loader.

Since I previously on 4.1 had cIOSCORP v3.4 installed on my Wii is it necessary to Uninstall it since I am already on 4.2? I just want to know if it is something I should consider in order for the next release of cIOSCORP to go smoothly. I want to avoid headaches!

it's probably completely overwritten with the update already... if not... then it will be when you install cIOSCORP v3.5...

 

[xander150]

Disc updates are SystemMenu related, not IOS related
Disc Updates update also IOS, what do you think why tehre are IOSes on game discs? And why do games request an update if you are on 4.2 but have old IOSes?
QUOTE(da_letter_a @ Sep 9 2009, 02:52 AM) I am planning to make a full wii modding package after cIOSCORP v3.x has been perfected.

So you'll never start your new project?

 

[DaMummy]

latter_a let me know if you need any more testers, i already have a wasabi modded wii that i use for games and have another wii just to mess around with softmodding and homebrew and such, currently its at a safe non nintendo 4.2, have bootmii installed as boot2 and ios, nand is backed up, its an lu33 and has most of the necessary homebrew installed like dop-ios, hbc, and whatnot, no preloader or starpatch though as i never saw any good use for em

 

[FiveseveN]

I have a Wii 4.2U I am not using cIOSCORP on it atm. Before pressing search and reading on how to update safely to 4.2 I just let the System Update go and do its thing. After going through getting homebrew on it and bootmii back up as boot2 I forgot I had cIOSCORP on my Wii. I am currently playing my back-ups through Neogamma back up loader.

Since I previously on 4.1 had cIOSCORP v3.4 installed on my Wii is it necessary to Uninstall it since I am already on 4.2? I just want to know if it is something I should consider in order for the next release of cIOSCORP to go smoothly. I want to avoid headaches!

it's probably completely overwritten with the update already... if not... then it will be when you install cIOSCORP v3.5...

Thanks for the memo! I can't wait for v3.5!

da_letter_a thank you for these cIOSCORPS updates and for providing a non loader solution! So yeah BOOM iceybitch.

 

[lorenzo67]

Hi, a question that is old but i can't find a response.

I have preloader installed, if i put cioscorp, lose preloader? In this case, i can install again after cioscorp?

thank you

Lorenzo