Breezehand-Overlay discussion

[TomSwitch]

I see you removed the ability to resize the (Hold ZL + L/R).

Zelda TOTK - I have to try purposely very hard open and close cheat folders and I get a crash eventually on 4MB.

Zelda BOTW - still wont load my cheat file on 4MB

N64 NSO - still instant crash on opening any cheat folder on 4MB

just like members only , members only works great on 6MB

Removing features probably didn’t eliminate the baggage. It’s more like carrying a locked chest around instead of leaving it at home. Once you fork something that’s feature-rich, there’s a price to pay.

It's like trying to loose weight for a fat guy.

 

[Nic87]

Removing features probably didn’t eliminate the baggage. It’s more like carrying a locked chest around instead of leaving it at home. Once you fork something that’s feature-rich, there’s a price to pay.

It's like trying to loose weight for a fat guy.

I get it. Thanks for taking the time to try.

Edizon Overlay works completely fine and allows me to keep my sysmodules on...and when I want to try some awesome features of breezehand...I will just have to be not lazy and turn off something like noexs which gives me more than enough to run overlay in 8MB.

And I do appreciate the lite version you made...no accidental cheat file changes...looks way better than edizon overlay and notes! Thank You.

 

[Kapeas]

Hi, thanks for all the tools and useful comments. Tryied to like all before realising there were lots lol. About to download overlay and try.
Tyvm for the overlay, and comments on how to properly use it

 

[kody]

I’m running into an issue with Breezehand-Overlay when trying to use it with Super Robot Wars Y v1.2.0.

Here’s my setup:

• Breezehand-Overlay: v0.88
• Ultrahand-Overlay: v2.2.9
• nx-ovlloader: v2.0.0

When I launch the game with Breezehand-Overlay, I get the error shown below.I’ve attached the cheat file I used for reference.



What’s strange is that the same cheat file works fine with:

• EdiZon-Overlay v1.0.14
• Breeze Beta99s and Beta100

Additionally, I don’t have any issue when using Dragon Quest VII Reimagined v1.1.0 with Breezehand-Overlay v0.88, and I’ve attached that cheat file as well for comparison.

Could you please help me figure out what’s causing this issue or how to fix it?

Thanks in advance for your support!

 

[TomSwitch]

I’m running into an issue with Breezehand-Overlay when trying to use it with Super Robot Wars Y v1.2.0.

Here’s my setup:

• Breezehand-Overlay: v0.88
• Ultrahand-Overlay: v2.2.9
• nx-ovlloader: v2.0.0

When I launch the game with Breezehand-Overlay, I get the error shown below.I’ve attached the cheat file I used for reference.

View attachment 559803

What’s strange is that the same cheat file works fine with:

• EdiZon-Overlay v1.0.14
• Breeze Beta99s and Beta100

Additionally, I don’t have any issue when using Dragon Quest VII Reimagined v1.1.0 with Breezehand-Overlay v0.88, and I’ve attached that cheat file as well for comparison.

Could you please help me figure out what’s causing this issue or how to fix it?

Thanks in advance for your support!

Check how much memory you allocated to ultrahand/breezehand this setting is common to both. 4MB has been reported to be unstable. Increase it or try one of the lite version

 

[kody]

Check how much memory you allocated to ultrahand/breezehand this setting is common to both. 4MB has been reported to be unstable. Increase it or try one of the lite version

Do you mean these two files shown in the screenshot, am I correct?



Also, could you let me know the recommended memory settings for Ultrahand/Breezehand so I can check if mine are configured properly?

Thank you very much.

 

[Nic87]

Do you mean these two files shown in the screenshot, am I correct?

View attachment 559809

Also, could you let me know the recommended memory settings for Ultrahand/Breezehand so I can check if mine are configured properly?

Thank you very much.

Lite needs minimum 6mb too

 

[kody]

Lite needs minimum 6mb too

This is what I see when I open the Ultrahand Overlay.



I added the following line in the config.ini of Ultrahand and Breezehand.

[memory]
custom_overlay_memory_MB=6

The issue still persists.

After multiple tries, I could not boot into Hekate. (I set the option to boot into Hekate instead of directly booting to the HOS.)

It only showed the Hekate logo and then a blank screen.

I fixed it by transferring a completely fresh Atmosphere build along with the other components.After that, I was able to boot into Hekate and then into the HOS.

 

[Nic87]

This is what I see when I open the Ultrahand Overlay.

View attachment 559834

I added the following line in the config.ini of Ultrahand and Breezehand.

[memory]
custom_overlay_memory_MB=6

The issue still persists.

After multiple tries, I could not boot into Hekate. (I set the option to boot into Hekate instead of directly booting to the HOS.)

It only showed the Hekate logo and then a blank screen.

I fixed it by transferring a completely fresh Atmosphere build along with the other components.After that, I was able to boot into Hekate and then into the HOS.

I don't touch the config.ini ... this is what I do...

Open Ultrahand Overlay
Press + (Start Button) to go to Main Settings
Go to System
Look at System RAM to see free amount
Adjust Overlay Memory (Slider) by Pressing A and moving left or right
(See Pic 1 + 2)
And your finished...


But..

If you don't have enough it will say "Not Enough Memory" on the top
(See Pic 3 + 4)

Then to free up memory, you can use breeze to turn off sysmodules temporarily until you need them again.

Breeze ---> Settings ---> Sysmodule Manager --->
(See Pic 5 to 8)

( * Don't forget to reverse your changes when you need your sysmodules that you turned off * )

edit...I'm also too stupid to figure out how to put the pictures in order in the attachments...for some reason they keep going out of order instead of 1-8....hopefully fixed now...

 

[kody]

I don't touch the config.ini ... this is what I do...

Open Ultrahand Overlay
Press + (Start Button) to go to Main Settings
Go to System
Look at System RAM to see free amount
Adjust Overlay Memory (Slider) by Pressing A and moving left or right
(See Pic 1 + 2)
And your finished...


But..

If you don't have enough it will say "Not Enough Memory" on the top
(See Pic 3 + 4)

Then to free up memory, you can use breeze to turn off sysmodules temporarily until you need them again.

Breeze ---> Settings ---> Sysmodule Manager --->
(See Pic 5 to 8)

( * Don't forget to reverse your changes when you need your sysmodules that you turned off * )

edit...I'm also too stupid to figure out how to put the pictures in order in the attachments...for some reason they keep going out of order instead of 1-8....hopefully fixed now...

Thank you, I really appreciate your help.

I changed the Overlay Memory setting from 4 MB to 6 MB, and now I have 7.5 MB free.

I only have sys-con enabled as a sysmodule.

Breezehand is working properly after the change.

 

[TomSwitch]

This download link is for members of the Nintendo SWITCH Cheat Codes Download group. Join the group to see it. It's free.

Register Log in

View attachment WIN_20260517_21_32_10_Pro.mp4

 

[Andre63]

This download link is for members of the Nintendo SWITCH Cheat Codes Download group. Join the group to see it. It's free.

Register Log in

@TomSwitch

Hi Tom,

First of all, a big thank you for your work.

I just updated to version 0.9.0 by downloading it directly from GitHub (unzipped and copied/pasted), but the label in Ultrahand shows 0.8.9. The same thing happens when updating directly from the overlay.
Of course, I rebooted the system.
Did I do something wrong?

On the other hand, I don't use an Aurora keyboard.
How do I remove it from sysmodules and the Switch?

Thank you so much.

 

[TomSwitch]

@TomSwitch

Hi Tom,

First of all, a big thank you for your work.

I just updated to version 0.9.0 by downloading it directly from GitHub (unzipped and copied/pasted), but the label in Ultrahand shows 0.8.9. The same thing happens when updating directly from the overlay.
Of course, I rebooted the system.
Did I do something wrong?

On the other hand, I don't use an Aurora keyboard.
How do I remove it from sysmodules and the Switch?

Thank you so much.

That is because I did not do a clean built. It is now fixed. The function should be the same. The sysmodule for Aurora keyboard is not activated. If you like you can delete it. atmosphere\contents\010000000000BD01

 

[Andre63]

That is because I did not do a clean built. It is now fixed. The function should be the same. The sysmodule for Aurora keyboard is not activated. If you like you can delete it. atmosphere\contents\010000000000BD01

You're the BEST!!!

 

[TomSwitch]

View attachment WIN_20260518_10_44_46_Pro.mp4
watch gen2 watch live, coming soon

Post automatically merged: May 18, 2026

This download link is for members of the Nintendo SWITCH Cheat Codes Download group. Join the group to see it. It's free.

Register Log in

 

[froggy55]

I’m running into an issue with Breezehand-Overlay when trying to use it with Super Robot Wars Y v1.2.0.

Here’s my setup:

• Breezehand-Overlay: v0.88
• Ultrahand-Overlay: v2.2.9
• nx-ovlloader: v2.0.0

When I launch the game with Breezehand-Overlay, I get the error shown below.I’ve attached the cheat file I used for reference.

View attachment 559803

What’s strange is that the same cheat file works fine with:

• EdiZon-Overlay v1.0.14
• Breeze Beta99s and Beta100

Additionally, I don’t have any issue when using Dragon Quest VII Reimagined v1.1.0 with Breezehand-Overlay v0.88, and I’ve attached that cheat file as well for comparison.

Could you please help me figure out what’s causing this issue or how to fix it?

Thanks in advance for your support!

i get a simular error only my codes 2347-0004 and happens because of my cheat file so like you i am using ultrahand the actual breeze im using is 1.0.6. beta now my cheat file is catigorized however i tested this on my other switch and breezehand worked fine specificaly with the cheat file of pokemon scarlet which is catigorized the difference is on my other switch im running uberhand on my switch with ultrahand both the pokemon scarlet cheat file and my cheat file for harvestmoon light of hope crash the whole system when i try to use breezehand and i get an error like the one above with the tesla overlay program id but my code is 2347-0004 for now im going to just stick with the edizon overlay for cheats hopefully this gets fixed or someone can give me answers as to why this happening anyways thanks for the tool

 

[kody]

i get a simular error only my codes 2347-0004 and happens because of my cheat file so like you i am using ultrahand the actual breeze im using is 1.0.6. beta now my cheat file is catigorized however i tested this on my other switch and breezehand worked fine specificaly with the cheat file of pokemon scarlet which is catigorized the difference is on my other switch im running uberhand on my switch with ultrahand both the pokemon scarlet cheat file and my cheat file for harvestmoon light of hope crash the whole system when i try to use breezehand and i get an error like the one above with the tesla overlay program id but my code is 2347-0004 for now im going to just stick with the edizon overlay for cheats hopefully this gets fixed or someone can give me answers as to why this happening anyways thanks for the tool

Have you tried increasing the overlay memory yet?

 

[froggy55]

Have you tried increasing the overlay memory yet?

yes i did after my last post i more carefully read this post and found the info. i cant believe i totaly forgot about the memory setting in ultrahand so i set it to 6mb and now everything works again thanks for your response though i felt like a goober when i relearnt about the memory setting lol