Has anyone gotten 0.3 to work with either 0.1 or Wanikoko's backup loader? At the present moment, I would only like to try to see if either version will load the eighth stage of Disaster: Day of Crisis. Any help would be appreciated.
A bit late now, but I'd suggest never installing anything from those "all in one" style packs, they contain loads of useless junk and just serve to confuse people.gllt said:
Just get the individual files you need from the developers page and do it properly - less room for things to go wrong that way.
- Joined
- Oct 28, 2008
- Messages
- 62
- Trophies
- 0
- Age
- 32
- Location
- ALABAMA
- Website
- gllt.tumblr.com
- XP
- 115
- Country
Yeah but I got it from THIS THREAD :V
That's almost like "Take a cookiDON'T YOU DARE TOUCH THAT BWAHH"
Oh well it doesn't matter I think a firmware reset will fix my problem, if its okay to do
That's almost like "Take a cookiDON'T YOU DARE TOUCH THAT BWAHH"
Oh well it doesn't matter I think a firmware reset will fix my problem, if its okay to do
india3 said:
Thanks for the reply. A few questions. What exactly do I need installed for the loader to work? All I've done is install the Homebrew Channel and cIOS. Am I missing something? If not, how would I go about reinstalling these things? I'm completely new to the scene and have done nothing but run the TP hack and then installed those two things and the backup launcher.
Also, do you know what your actual error said? I can't figure mine out.
bantheradio said:
I have been unsuccessful with getting both 0.3 and 0.1 to work. 0.3 took over even though i did not remove the previous IOS.
Thats a disk read error, you will have to reburn the game. I have had that happen on and off with ten pin alley2, but I used Verbatim DVD+R DL disks which is the only ones I had at the time. I think the wii prefers verbatim DVD-R disks, and that could be your whole problem. Have never had a problem with any burn on a verbatim DVD-R. Hope I have helped you out.
Doesn't matter where you got it from (and webforums are about THE worst place to get stuff from, unless it's from the dev releasing it on a forum). Stick to getting the original release from the developer and follow the readme they include. It's easy and shouldn't give any problems.gllt said:
- Joined
- Oct 28, 2008
- Messages
- 62
- Trophies
- 0
- Age
- 32
- Location
- ALABAMA
- Website
- gllt.tumblr.com
- XP
- 115
- Country
quim69 said:
I get what you're sayin' :V
Otherwise I do believe the problem is unrelated now, sans what happens to cIOS, HBC, Backuploader, and installed wads when I reset my firmware, since I'd love to know before I do it. hurr
cowboys4life22 said:
Or instead of buying new DVD-R's, just change the booktype to DVD-ROM before you burn and you will be fine. I have used nothing but DVD+R's with no problems.
Also make sure your burning at around 2.4x or somewhere around there. Faster burns can corrupt the process.
Thanks all. I've been changing the BookType, but it's not helping. How do I get Nero to burn below 4x?
EDIT: Ok, I can burn at any speed now. Either it wasn't there before or I'm losing my mind. Probably the latter. Will try burning at 2x now.
EDIT: Ok, I can burn at any speed now. Either it wasn't there before or I'm losing my mind. Probably the latter. Will try burning at 2x now.
Someone get the three loaders to work simultaneously (thanks gllt), but he doesn't know how he did it, so you my want to try several things, eg. install the ppc_gba cIOS_fix and install DVDx_IOS249, then install the cIOs for the loader, without uninstall the other, just overwrite it, try that, maybe works
Destian said:
Try using Imgbrn opposed to Nero. Imgbrn will allow you change the book type and also give you a 2.4x option.
http://www.imgburn.com/
MainframeF4 said:
Nero is letting me burn at lower speeds now. Probably user error. No idea what I did. I started off using ImgBurn, but it doesn't seem to want to save the booktype. I've read somewhere that it may be an issue with TSST drives.
Destian said:Ok, took a picture. Can anyone tell me what this says?
Thank you.
Set Error No DVD Decrypt failed.
Errr. Scratch that. I still can't burn under 4x. Nero lists all the speeds until I insert the media (Sony) at which point 4x becomes the lowest, despite the fact that 1x-16x is written on the DVD.
Thank you for decoding that, ether. At least I know that much now.
Thank you for decoding that, ether. At least I know that much now.
MainframeF4 said:
For some drivers ImgBurn doesn't let you change the Book Type, if Nero detect a DVD 16X, let the Nero burn at that speed, I insist all of my games were burnt at 16X on a DVD+R (Booktype DVD-ROM), Verbatim of course, stop flooding the forum, with "...I can't play my game, and I've burnt at ?? speed several times and on the list says the game works", if you don't burnt with VERBATIM you're wasting blank media.
Well here we go again...
Does anyone knows when there will be a new release for the backup loader and the new cIOS to fit on the new homebrew channel which fixed the Phantom 3.4? of course, WII gator should take a break after his amazing work, it's not an emergency...but still some bakas updated their WII, not reading that the homebrew channel fixed the Uptade for itself, and that the channels has to be updated too...and of course as the source code is included, some coders may do it by themselves, but i was just asking...
Does anyone knows when there will be a new release for the backup loader and the new cIOS to fit on the new homebrew channel which fixed the Phantom 3.4? of course, WII gator should take a break after his amazing work, it's not an emergency...but still some bakas updated their WII, not reading that the homebrew channel fixed the Uptade for itself, and that the channels has to be updated too...and of course as the source code is included, some coders may do it by themselves, but i was just asking...
Similar threads
-
- Portal
