Hacking alternative fw for gtw3ds

[burboss]

has anyone tried alternative firmware (wood?) for the blue card?

 

[Duo8]

has anyone tried alternative firmware (wood?) for the blue card?

That's just a clone R4i.

 

[Technicmaster0]

has anyone tried alternative firmware (wood?) for the blue card?

It uses a (outdated, hacked) version of wood

 

[crisash]

and alternative firmware for red card?

 

[MopSec]

There is none

 

[burboss]

It uses a (outdated, hacked) version of wood

in the readme.txt there is :

Copyright (C) 2007 Acekard, www.acekard.com

which firmware can i put in the microsd?
(my blue card with 3ds 5.1.0 sometimes freeze and i must turn off with long press button)

 

[Technicmaster0]

in the readme.txt there is :

Copyright (C) 2007 Acekard, www.acekard.com

which firmware can i put in the microsd?
(my blue card with 3ds 5.1.0 sometimes freeze and i must turn off with long press button)

The new Wood is based on a firmware by the acekard team.
That sounds more like a speed/ connection issue. I had no problems with my blue card till now. Which revision do you have? X-B or the other one?

 

[burboss]

The new Wood is based on a firmware by the acekard team.
That sounds more like a speed/ connection issue. I had no problems with my blue card till now. Which revision do you have? X-B or the other one?

revision??????

were can i find?

 

[Arnold0]

You can see this here :

Mine is revision 003.
I used my blue card sometimes to play MarioKart DS in multiplayer and I had no issue with it.

 

[Mariko]

Mine is revision 003. I used my blue card sometimes to play MarioKart DS in multiplayer and I had no issue with it.

003? The marking on mine reads X-B. Is that of any significance? Is it a different design? Also, is firmware on 003 and X-B the same? I've been asking about replacement firmware as well, but the answer is either a "no", or people say it's a clone of a R4i, as if that helps in any way (it doesn't accept R4i firmware, so it's not a compatible clone, making these kinds on answers completely irrelevant).

 

[Arnold0]

The firmware for 003 and X-B is the same (Gateway website only have a single link for download so they can't know if you have 003 or X-B)
Actualy many people have the X-B one, I belive I never see someone arond here speaking about the 003.
I don't know if there is a huge difference, but I know that I looked many R4i website, and I never found a R4i firmware that works on my card.

 

[burboss]

my card has no symbol next to contacts.
when i use the blue card if i press START>HELP i read wood akmenu 1.56hw: 00sys:ndsi 1.45
i think 1.56 is the version wood, but can i change with new version?......1.58....1.60 ??

 

[Technicmaster0]

my card has no symbol next to contacts.
when i use the blue card if i press START>HELP i read wood akmenu 1.56hw: 00sys:ndsi 1.45
i think 1.56 is the version wood, but can i change with new version?......1.58....1.60 ??

You can't use a newer WOOD version since they are not hacked.

003? The marking on mine reads X-B. Is that of any significance? Is it a different design? Also, is firmware on 003 and X-B the same? I've been asking about replacement firmware as well, but the answer is either a "no", or people say it's a clone of a R4i, as if that helps in any way (it doesn't accept R4i firmware, so it's not a compatible clone, making these kinds on answers completely irrelevant).

It's relevant: You can use every change OS that supports Wood (and Acekard 2.i?). Although the other possibilities aren't as good as wood R4.

 

[burboss]

You can't use a newer WOOD version since they are not hacked.


It's relevant: You can use every change OS that supports Wood (and Acekard 2.i?). Although the other possibilities aren't as good as wood R4.

sorry but, the wood firmware in the blu card are hacked??????

 

[Duo8]

sorry but, the wood firmware in the blu card are hacked??????

Yes. So it would run on a clone.