yes it did. im gonna put it into the pc now and have a look and let you know whats on ith2testw is to test the card for legitmacy, I assume the sd card came with the switch?
yes it did. im gonna put it into the pc now and have a look and let you know whats on ith2testw is to test the card for legitmacy, I assume the sd card came with the switch?
yes it did. im gonna put it into the pc now and have a look and let you know whats on it
This is whats on. I've copied it to my pch2testw is to test the card for legitmacy, I assume the sd card came with the switch?
I'm running h2test but it's 3hours to goh2testw is to test the card for legitmacy, I assume the sd card came with the switch?
This is the result. Not sure what to do next. Should i just wipe the SD card and start fresh or is there another way? Any advice is appreciatedI'm running h2test but it's 3hours to go
so ive followed the guide, replaced fusee and hekate. but now i get "a fatal error occurred when running fusee. invalid gpt signature."So yes, this hekate_ipl.ini is still pointing to old settings.
Make a backup of that file and then follow this guide to get you back up and running:
rentry./ MigrateToAtmosphere1_0_0
It’s quick and easy. You will see the pieces that got skipped when you run through it.
so ive followed the guide, replaced fusee and hekate. but now i get "a fatal error occurred when running fusee. invalid gpt signature."
what have I missed?
I made a copy but I just edited the file in text and saved, didnt overwrite with new file.did you backuo your hekate_ipl.ini file and create a new one based on the guide?
are you injecting a payload (V1/Erista) or using a modchip (V2/Mariko)?
do you have much installed on you emummc or is this all part of a fresh install?
Thank you! So if you emummc is blank, let’s inext the latest version of Hekate and create a new partition based emummc via the emmc menu on the main page. That should fix everything right up.I made a copy but I just edited the file in text and saved, didnt overwrite with new file.
I have rcm jig to boot payload.
I don’t have anything installed on emummc.
Not sure what you mean by inext the latest version of hekate, I have the latest version of hekate on my sd. And I already partitioned my sd and created emummc as shown below. Let me know if that’s right. Many thanks!Thank you! So if you emummc is blank, let’s inext the latest version of Hekate and create a new partition based emummc via the emmc menu on the main page. That should fix everything right up.
(I misspelled inject.)Not sure what you mean by inext the latest version of hekate, I have the latest version of hekate on my sd. And I already partitioned my sd and created emummc as shown below. Let me know if that’s right. Many thanks!
Unfortunately it’s still giving me that error(I misspelled inject.)
Yes, that’s precisely correct. Did creating a new emummc help our situation or do we have the same error as before?
Hello! New to Switch modding. I've got an older one that I use a jig to get into RCM with. Firmware is `14.1.2|AMS 1.3.2|E`. I want to install NSP/NSZs via USB, ideally harddrive, but PC is k too. I tried tinfoil, but even though nut would show "connected", and the switch was getting a charge, `usbfs` was empty under both windows and linux (ubuntu). So I tried tinwoo. Tinwoo can actually install things from the hard drive! When I do though, I get "You must have the software in order to play". If I install using tinwoo via SD card however, everything works. Game plays fine. This holds regardless of whether I install to SD card or system memory. I have the latest sigpatches. I triple-checked that the one on the HDD is not a patch (and that the SD card and HDD have the same file).
My current question is, why is tinwoo working via SD card, but not USB HDD?
I'm also wondering if there's a better way to do this?
Hello! New to Switch modding. I've got an older one that I use a jig to get into RCM with. Firmware is `14.1.2|AMS 1.3.2|E`. I want to install NSP/NSZs via USB, ideally harddrive, but PC is k too. I tried tinfoil, but even though nut would show "connected", and the switch was getting a charge, `usbfs` was empty under both windows and linux (ubuntu). So I tried tinwoo. Tinwoo can actually install things from the hard drive! When I do though, I get "You must have the software in order to play". If I install using tinwoo via SD card however, everything works. Game plays fine. This holds regardless of whether I install to SD card or system memory. I have the latest sigpatches. I triple-checked that the one on the HDD is not a patch (and that the SD card and HDD have the same file).
My current question is, why is tinwoo working via SD card, but not USB HDD?
I'm also wondering if there's a better way to do this?
Having problem once I choose album,having error ,before that I tried to transfer linkalho.nro to switch folder via dbi mtp server after that I crashes once I open my album.
Tried to remove linkalho on the switch folder same result,copy paste my backup to switch folder same result,
Any idea how can i bring back my album?
Thank you sir i just replace hbmenu.nro newer oneLinkalho.nro doesn’t do anything unless you click it so i’m not sure it’s related.
Do you have a /atmosphere/contents/01000000001000 folder? If so, delete it.
Try replacing /hbmenu.nro with the one from the official repo here: https://github.com/switchbrew/nx-hbmenu
That fixed it?Thank you sir i just replace hbmenu.nro newer one