Ok thanks for the help. I already installed one of the converted ones before I read that I should check them first. It worked fine. I'll go ahead and try the rest.
Ok thanks for the help. I already installed one of the converted ones before I read that I should check them first. It worked fine. I'll go ahead and try the rest.
holy shit i have no idea what happened i literally didn't change anything and now botw is loading with mods. gonna try to see what changed and update in 10~15 mins
--------------------- MERGED ---------------------------
botw loads with mods but i think it's because i placed my old layeredFS folder and for some reason it works (i think) but other stuff like ACNH doesn't work
--------------------- MERGED ---------------------------
botw loads with mods but i think it's because i placed my old layeredFS folder and for some reason it works (i think) but other stuff like ACNH doesn't work
You can look at the details from here: https://switch.homebrew.guide/gettingstarted/choosinganexploit.html
I would recommend you to go with fusee-glee. I think, it seems dangerous to you, but it's a really low chance that you will brick your device because of the jig. Just buy it from a known site, it would cost lower then 10$
1) If you mean the cfw version like atmosphere 14.4, yes you can get the latest one. But if you mean switch firmware version like 10.2.0, as far as I know, you can't get it on sysnand, but you can update your emunand to the latest switch firmware.
2) You can enable autoRCM to make it so that you don't need to use "jig" on every boot to get into RCM, so that you would just need a payload injector.
Yes, you don't need to do something on sleep mode.
Note: You can add an internal chip (like Trinket) to unpatched switches so that you wouldn't need either a payload injector or a jig. It would automatically boot you into CFW.
reinx doesn't support emunand, also the best way might be trying to reconfigure hekate to see it again
also you emummc config is set to sd01 instead of raw01, dunno if that will make a difference
as for your hekate file that's missing the emummc entry
Hi Guys. I'm going to do my first cfw attempt tomorrow. Just waiting on an RCM loader. I have my guide ready to go but I just wanted to check if I need to update the RCM loader when it arrives?
My switch is unpatched and firmware is10.1 out of the box, do i need to update to 10.2?
My switch is unpatched and firmware is10.1 out of the box, do i need to update to 10.2?
Last edited by Nathanas,
you don't need to update if you don't want
also you got unpatched on 10.1 out of box
was it pre-owned or?
Awesome thank you. Yes it is preowned and required many phone calls to find haha. Although I have considered a few different guides, which do you think is the most definitive, user friendly for a first timer?
Most of them are pretty good now, just make sure you do a backup of your nand and keys and put them in a safe place before continuing which teh guides should cover
Hey guys,
first of all i want to thank everybody who is participating so well! This board helped me a lot to get atmosphere on my switch. Im not that good in english but i will try my best for explaining.
My System:
-Atmosphere 0.14.4
-Hekate ctcaer_5.3.3_Nyx_0.9.4
My hekate_ipl.ini looks like this
Further information: Im not playing any of my cartridge games online.
My Questions:
1. Can i still play my Mario Cart - Cartridge with my wlan turned on? (Can i get banned)?
2. Are there any safety precautions settings or apps which i should install on my switch?
3. I want to install the sigpatches form the sticky thread of ShadowOne333
But in the tutorial he says, that i have to substitute my hekate_ipl.ini with the one in the zip-file.
The hekate_ipl.ini in the zip-file looks like this
It will change my way of booting. At the moment i have two options in hekate for launching a cfw.
Option 1: [Atmosphere FSS0 SYS]
Option 2: [Stock SYS]
But with the new hekate_ipl.ini i will have different boot options and i dont know which boot option i use for which thing.
Should i substitute it anyway?
What is [CFW - sysMMC]?
What is [CFW - emuMMC]?
What is [Stock - sysMMC]? (I think its the stock os?)
I hope i could explain myself in a good way so you could understand me and again... Thanks a lot!
first of all i want to thank everybody who is participating so well! This board helped me a lot to get atmosphere on my switch. Im not that good in english but i will try my best for explaining.
My System:
-Atmosphere 0.14.4
-Hekate ctcaer_5.3.3_Nyx_0.9.4
My hekate_ipl.ini looks like this
Further information: Im not playing any of my cartridge games online.
My Questions:
1. Can i still play my Mario Cart - Cartridge with my wlan turned on? (Can i get banned)?
2. Are there any safety precautions settings or apps which i should install on my switch?
3. I want to install the sigpatches form the sticky thread of ShadowOne333
But in the tutorial he says, that i have to substitute my hekate_ipl.ini with the one in the zip-file.
The hekate_ipl.ini in the zip-file looks like this
It will change my way of booting. At the moment i have two options in hekate for launching a cfw.
Option 1: [Atmosphere FSS0 SYS]
Option 2: [Stock SYS]
But with the new hekate_ipl.ini i will have different boot options and i dont know which boot option i use for which thing.
Should i substitute it anyway?
What is [CFW - sysMMC]?
What is [CFW - emuMMC]?
What is [Stock - sysMMC]? (I think its the stock os?)
I hope i could explain myself in a good way so you could understand me and again... Thanks a lot!
Unfortunately my switch has been banned. I'm looking for ways to transfer my Animal Crossing save (which exists on sysnand) to my emummc. I don't feel like getting rid of emummc since I already have all my games and updates installed. I'm just looking to move this one save over.
Boot Atmosphere on sysnand, backup save with checkpoint/jksv etc, reboot to emummc, restore save
CFW - SysMMC - Boots Atmosphere on the stock system
CFW - EmuMMC - Boots Atmosphere on the emunand
Stock - SysMMC - Loads just enough to boot the system stock without any CFW
Your current configs are basically:
Atmosphere - FSS0 Sys is equal to CFW - SysMMC
Stock Sys - is equal to Stock - SysMMC
1) Yes - If it's on a cfw you should see answer 2
2) Yes there are, Atmosphere should have an option to enable incognito which remove information to stop you connecting to Nintendos servers, additionally if you so choose, you can enable 90DNS as well as Incognito
3) Sigpatches depend on how you are booting, if you are booting with FSS0 via hekate you need to get the hekate sig patchs, if you are using fusee-primary with FSS0 or Fusee-Secondary then you need to get the Fusee sigpatches
Payload injector is the device that you send a payload to launch an RCM app (hekate/lockpick/Incognito/...) in the basic. You can use your pc or android device for this. But it is easier to use devices that are built for this purpose, you can search them up.
Hi, quick and dumb question, the answer is probably yes somehow but
It is even possible to get banned if we use
Emummc + 90dsn/airplane (but bluetooth for joycons/controllers)/no wifi at all/incognito (atmosphere)
but keeping the sysnand completely clean ?
At this moment the only thing who can be detected is the stuffs inside my sd card, if I use a special two sd card, one for the sysnand and one for the emummc, at this state can I really get banned ?
It is even possible to get banned if we use
Emummc + 90dsn/airplane (but bluetooth for joycons/controllers)/no wifi at all/incognito (atmosphere)
but keeping the sysnand completely clean ?
At this moment the only thing who can be detected is the stuffs inside my sd card, if I use a special two sd card, one for the sysnand and one for the emummc, at this state can I really get banned ?
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
32GBs is the baseline for 4K video editing these days and lots of recommendations for 64GBs but for games 16,GBs is honestly plenty for a long time. -
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
Some sort of police thing going on near me lol "Get out of the car with your hands up and walk backwards towards us" over a loud speaker thing
-
-
like a 250 dollar kit back when DDR4 was Intel only
