Hacking SWITCH NOOB PARADISE - Ask questions here

[Deleted member 539105]

Delete

 

[Lucaspec72]

holy shit i have no idea what happened i literally didn't change anything and now botw is loading with mods. gonna try to see what changed and update in 10~15 mins

--------------------- MERGED ---------------------------

botw loads with mods but i think it's because i placed my old layeredFS folder and for some reason it works (i think) but other stuff like ACNH doesn't work

 

[GCS]

So if fw is 4.1 or lower, there's no need any jigs?

You can look at the details from here: https://switch.homebrew.guide/gettingstarted/choosinganexploit.html
I would recommend you to go with fusee-glee. I think, it seems dangerous to you, but it's a really low chance that you will brick your device because of the jig. Just buy it from a known site, it would cost lower then 10$

 

[Lord M]

You can look at the details from here: https://switch.homebrew.guide/gettingstarted/choosinganexploit.html
I would recommend you to go with fusee-glee. I think, it seems dangerous to you, but it's a really low chance that you will brick your device because of the jig. Just buy it from a known site, it would cost lower then 10$

Ok thanks. If i'll get a Switch, i post here if the jigs i'll chose is good or not.
Another 2 questions:

1) The 4.1 fw or lower can updating the CFW like others?
2) The Switch that require jigs have to do the whole process at every boot unless you put console in sleep mode, right?

 

[GCS]

Ok thanks. If i'll get a Switch, i post here if the jigs i'll chose is good or not.
Another 2 questions:

1) The 4.1 fw or lower can updating the CFW like others?
2) The Switch that require jigs have to do the whole process at every boot unless you put console in sleep mode, right?

1) If you mean the cfw version like atmosphere 14.4, yes you can get the latest one. But if you mean switch firmware version like 10.2.0, as far as I know, you can't get it on sysnand, but you can update your emunand to the latest switch firmware.

2) You can enable autoRCM to make it so that you don't need to use "jig" on every boot to get into RCM, so that you would just need a payload injector.
Yes, you don't need to do something on sleep mode.

Note: You can add an internal chip (like Trinket) to unpatched switches so that you wouldn't need either a payload injector or a jig. It would automatically boot you into CFW.

 

[jimbo13]

So I made my emuMMC disappear screwing around with ReiNX trying to install Incognito.... I know RAW is the EmuNAND I want, any ideas how I fix this.

 

[Adran_Marit]

So I made my emuMMC disappear screwing around with ReiNX trying to install Incognito.... I know RAW is the EmuNAND I want, any ideas how I fix this.View attachment 227373 View attachment 227374

reinx doesn't support emunand, also the best way might be trying to reconfigure hekate to see it again

 

[jimbo13]

reinx doesn't support emunand, also the best way might be trying to reconfigure hekate to see it again

I did that, I enabled/changed to raw partition. Still no emuMMC

 

[Adran_Marit]

I did that, I enabled/changed to raw partition. Still no emuMMC

also you emummc config is set to sd01 instead of raw01, dunno if that will make a difference

as for your hekate file that's missing the emummc entry

 

[Nathanas]

Hi Guys. I'm going to do my first cfw attempt tomorrow. Just waiting on an RCM loader. I have my guide ready to go but I just wanted to check if I need to update the RCM loader when it arrives?
My switch is unpatched and firmware is10.1 out of the box, do i need to update to 10.2?

 

[Adran_Marit]

Hi Guys. I'm going to do my first cfw attempt tomorrow. Just waiting on an RCM loader. I have my guide ready to go but I just wanted to check if I need to update the RCM loader when it arrives?
My switch is unpatched and firmware is10.1 out of the box, do i need to update to 10.2?

you don't need to update if you don't want

also you got unpatched on 10.1 out of box

was it pre-owned or?

 

[Nathanas]

you don't need to update if you don't want

also you got unpatched on 10.1 out of box

was it pre-owned or?

Awesome thank you. Yes it is preowned and required many phone calls to find haha. Although I have considered a few different guides, which do you think is the most definitive, user friendly for a first timer?

 

[Adran_Marit]

Awesome thank you. Yes it is preowned and required many phone calls to find haha. Although I have considered a few different guides, which do you think is the most definitive, user friendly for a first timer?

Most of them are pretty good now, just make sure you do a backup of your nand and keys and put them in a safe place before continuing which teh guides should cover

 

[hacktro]

Hey guys,

first of all i want to thank everybody who is participating so well! This board helped me a lot to get atmosphere on my switch. Im not that good in english but i will try my best for explaining.

My System:
-Atmosphere 0.14.4
-Hekate ctcaer_5.3.3_Nyx_0.9.4


My hekate_ipl.ini looks like this

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=1
{------ Atmosphere ------}
[Atmosphere FSS0 SYS]
fss0=atmosphere/fusee-secondary.bin
kip1=atmosphere/kips/*
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp
{}
{-------- Stock ---------}
[Stock SYS]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp

Further information: Im not playing any of my cartridge games online.

My Questions:

1. Can i still play my Mario Cart - Cartridge with my wlan turned on? (Can i get banned)?
2. Are there any safety precautions settings or apps which i should install on my switch?
3. I want to install the sigpatches form the sticky thread of ShadowOne333

But in the tutorial he says, that i have to substitute my hekate_ipl.ini with the one in the zip-file.
The hekate_ipl.ini in the zip-file looks like this

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100
[CFW - sysMMC]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp
[CFW - emuMMC]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp
[Stock - sysMMC]
fss0=atmosphere/fusee-secondary.bin
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp

It will change my way of booting. At the moment i have two options in hekate for launching a cfw.
Option 1: [Atmosphere FSS0 SYS]
Option 2: [Stock SYS]

But with the new hekate_ipl.ini i will have different boot options and i dont know which boot option i use for which thing.
Should i substitute it anyway?
What is [CFW - sysMMC]?
What is [CFW - emuMMC]?
What is [Stock - sysMMC]? (I think its the stock os?)



I hope i could explain myself in a good way so you could understand me and again... Thanks a lot!

 

[Iamapirate]

Unfortunately my switch has been banned. I'm looking for ways to transfer my Animal Crossing save (which exists on sysnand) to my emummc. I don't feel like getting rid of emummc since I already have all my games and updates installed. I'm just looking to move this one save over.

 

[Adran_Marit]

Unfortunately my switch has been banned. I'm looking for ways to transfer my Animal Crossing save (which exists on sysnand) to my emummc. I don't feel like getting rid of emummc since I already have all my games and updates installed. I'm just looking to move this one save over.

Boot Atmosphere on sysnand, backup save with checkpoint/jksv etc, reboot to emummc, restore save

Hey guys,

first of all i want to thank everybody who is participating so well! This board helped me a lot to get atmosphere on my switch. Im not that good in english but i will try my best for explaining.

My System:
-Atmosphere 0.14.4
-Hekate ctcaer_5.3.3_Nyx_0.9.4


My hekate_ipl.ini looks like this



Further information: Im not playing any of my cartridge games online.

My Questions:

1. Can i still play my Mario Cart - Cartridge with my wlan turned on? (Can i get banned)?
2. Are there any safety precautions settings or apps which i should install on my switch?
3. I want to install the sigpatches form the sticky thread of ShadowOne333

But in the tutorial he says, that i have to substitute my hekate_ipl.ini with the one in the zip-file.
The hekate_ipl.ini in the zip-file looks like this


It will change my way of booting. At the moment i have two options in hekate for launching a cfw.
Option 1: [Atmosphere FSS0 SYS]
Option 2: [Stock SYS]

But with the new hekate_ipl.ini i will have different boot options and i dont know which boot option i use for which thing.
Should i substitute it anyway?
What is [CFW - sysMMC]?
What is [CFW - emuMMC]?
What is [Stock - sysMMC]? (I think its the stock os?)



I hope i could explain myself in a good way so you could understand me and again... Thanks a lot!

CFW - SysMMC - Boots Atmosphere on the stock system
CFW - EmuMMC - Boots Atmosphere on the emunand
Stock - SysMMC - Loads just enough to boot the system stock without any CFW


Your current configs are basically:
Atmosphere - FSS0 Sys is equal to CFW - SysMMC
Stock Sys - is equal to Stock - SysMMC

1) Yes - If it's on a cfw you should see answer 2
2) Yes there are, Atmosphere should have an option to enable incognito which remove information to stop you connecting to Nintendos servers, additionally if you so choose, you can enable 90DNS as well as Incognito
3) Sigpatches depend on how you are booting, if you are booting with FSS0 via hekate you need to get the hekate sig patchs, if you are using fusee-primary with FSS0 or Fusee-Secondary then you need to get the Fusee sigpatches

 

[Lord M]

1) If you mean the cfw version like atmosphere 14.4, yes you can get the latest one. But if you mean switch firmware version like 10.2.0, as far as I know, you can't get it on sysnand, but you can update your emunand to the latest switch firmware.

2) You can enable autoRCM to make it so that you don't need to use "jig" on every boot to get into RCM, so that you would just need a payload injector.
Yes, you don't need to do something on sleep mode.

Note: You can add an internal chip (like Trinket) to unpatched switches so that you wouldn't need either a payload injector or a jig. It would automatically boot you into CFW.

Ok, got it. Now its a bit cleaner XD
I'll see if i could get a Switch with at least 4.1 fw.

Just because im noob: what is a payload injector? I mean: what i need to load it?

 

[GCS]

Ok, got it. Now its a bit cleaner XD
I'll see if i could get a Switch with at least 4.1 fw.

Just because im noob: what is a payload injector? I mean: what i need to load it?

Payload injector is the device that you send a payload to launch an RCM app (hekate/lockpick/Incognito/...) in the basic. You can use your pc or android device for this. But it is easier to use devices that are built for this purpose, you can search them up.

 

[fatherjack]

...nvm

 

[Kanakops]

Hi, quick and dumb question, the answer is probably yes somehow but

It is even possible to get banned if we use

Emummc + 90dsn/airplane (but bluetooth for joycons/controllers)/no wifi at all/incognito (atmosphere)
but keeping the sysnand completely clean ?

At this moment the only thing who can be detected is the stuffs inside my sd card, if I use a special two sd card, one for the sysnand and one for the emummc, at this state can I really get banned ?