Hacking Online PegaSwitch Server for Flog date setting

machinoman · Oct 29, 2017

For those of you who are on firmware 3.0.0 or below and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the setRtc.js script upon starting up. USE AT YOUR OWN RISK!!!

Instructions:

Set Primary and Secondary DNS to 97.74.232.2
Select 'Connect to this Network' or 'System Update'
If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

LanceKalzack · Oct 29, 2017

Error Code: 2168-0002

PotatisKnug · Oct 29, 2017

machinoman said:
For those of you who are on firmware 3.0.0 and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the SetupNew.js and setRtc.js scripts upon starting up. SetupNew.js is only intended to be used once, but I have run the script multiple times on my own device with no apparent issues. USE AT YOUR OWN RISK!!!

Instructions:

Set Primary and Secondary DNS to 97.74.232.2

Select 'Connect to this Network' or 'System Update'

If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

So, it doesn't work on 3.0.2?

Nezztor · Oct 29, 2017

LanceKalzack said:
Error Code: 2168-0002

check that you are on 3.0.0 fw

PotatisKnug said:
So, it doesn't work on 3.0.2?

No, this only work for 3.0.0 FW

PotatisKnug · Oct 29, 2017

Nezztor said:
check that you are on 3.0.0 fw

No, this only work for 3.0.0 FW

Damn.

DocAmes1980 · Oct 29, 2017

Cool. The scripts succeeded on the 4th attempt. Got Golf to launch by doing the motion.

jam1garner · Oct 29, 2017

1. Newer pegaswitch versions should run SetupNew.js by itself iirc
2. Assuming this is using my script for setting the time it should work for anything between 2.0 and 3.0 inclusive.

MonMonz · Oct 29, 2017

I am on 2.1 can i try this or its tied to 3.0 only?

Nezztor · Oct 29, 2017

MonMonz said:
I am on 2.1 can i try this or its tied to 3.0 only?

Yes ,any fw <3.0.0 can use this

machinoman · Oct 29, 2017

Nezztor said:
Yes ,any fw <3.0.0 can use this

really? oops. i bought pokken just to update to 3.0.0... never even played it

tunip3 · Oct 29, 2017

jam1garner said:
1. Newer pegaswitch versions should run SetupNew.js by itself iirc
2. Assuming this is using my script for setting the time it should work for anything between 2.0 and 3.0 inclusive.

What does setup new even do

machinoman · Oct 29, 2017

i am not quite sure. you can find it here:

SetupNew.js

I have run it dozens of times now with no problems.

petethepug · Oct 30, 2017

Quick question: I followed all the instructions and my date & time is set to 7/11, how do I activate FLOG?

The webpage just takes me back to the home menu

machinoman · Oct 30, 2017

petethepug said:
Quick question: I followed all the instructions and my date & time is set to 7/11, how do I activate FLOG?

The webpage just takes me back to the home menu

standing up, hold both the joycons pointing the R and L buttons towards the ground. then in one to two seconds lift the joycons to your chest and push forward like you are pushing someone off a cliff, all while rotating the joycons to point up in the end. its like what this guy does (make sure to hold both the joycons pointing the R and L buttons towards the ground an the beginning):

KeyZiro · Oct 30, 2017

It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

machinoman · Oct 30, 2017

KeyZiro said:
It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

Hmmm, ok. I removed the start up script, which is not apparently necessary, and left just the date setting. Could you try it again?

KeyZiro · Oct 30, 2017

machinoman said:
Hmmm, ok. I removed the start up script, which is not apparently necessary, and left just the date setting. Could you try it again?

Works, thanks you !

blinkzane · Oct 30, 2017

machinoman said:
For those of you who are on firmware 3.0.0 or below and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the setRtc.js script upon starting up. USE AT YOUR OWN RISK!!!

Instructions:

Set Primary and Secondary DNS to 97.74.232.2

Select 'Connect to this Network' or 'System Update'

If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

nice profile picture
I will add this to my guide for future use

edit: click here

petethepug · Oct 30, 2017

machinoman said:
standing up, hold both the joycons pointing the R and L buttons towards the ground. then in one to two seconds lift the joycons to your chest and push forward like you are pushing someone off a cliff, all while rotating the joycons to point up in the end. its like what this guy does, but he is doing it wrong by not starting off by pointing them downward:

Alright, I will try doing this and see if anything changes

LanceKalzack · Oct 30, 2017

KeyZiro said:
It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

Did you do anything else beside switching DNS? I'm on 2.3.0 and I get an error evertime I hit "System Update" or "Connect to this Network"

--------------------- MERGED ---------------------------

LanceKalzack said:
Did you do anything else beside switching DNS? I'm on 2.3.0 and I get an error evertime I hit "System Update" or "Connect to this Network"

Disregard, finally worked after trying numerous times.

Hacking Online PegaSwitch Server for Flog date setting

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

[debugger active]

Well-Known Member

PUG

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Panic at your moms house

PUG

New Member

Similar threads

Popular threads in this forum