Hacking Online PegaSwitch Server for Flog date setting

[machinoman]

For those of you who are on firmware 3.0.0 or below and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the setRtc.js script upon starting up. USE AT YOUR OWN RISK!!!

Instructions:

1. Set Primary and Secondary DNS to 97.74.232.2
2. Select 'Connect to this Network' or 'System Update'
3. If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

 

[LanceKalzack]

Error Code: 2168-0002

 

[PotatisKnug]

For those of you who are on firmware 3.0.0 and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the SetupNew.js and setRtc.js scripts upon starting up. SetupNew.js is only intended to be used once, but I have run the script multiple times on my own device with no apparent issues. USE AT YOUR OWN RISK!!!

Instructions:

1. Set Primary and Secondary DNS to 97.74.232.2
2. Select 'Connect to this Network' or 'System Update'
3. If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

So, it doesn't work on 3.0.2?

 

[Nezztor]

Error Code: 2168-0002

check that you are on 3.0.0 fw

So, it doesn't work on 3.0.2?

No, this only work for 3.0.0 FW

 

[PotatisKnug]

check that you are on 3.0.0 fw



No, this only work for 3.0.0 FW

Damn.

 

[DocAmes1980]

Cool. The scripts succeeded on the 4th attempt. Got Golf to launch by doing the motion.

 

[jam1garner]

1. Newer pegaswitch versions should run SetupNew.js by itself iirc
2. Assuming this is using my script for setting the time it should work for anything between 2.0 and 3.0 inclusive.

 

[MonMonz]

I am on 2.1 can i try this or its tied to 3.0 only?

 

[Nezztor]

I am on 2.1 can i try this or its tied to 3.0 only?

Yes ,any fw <3.0.0 can use this

 

[machinoman]

Yes ,any fw <3.0.0 can use this

really? oops. i bought pokken just to update to 3.0.0... never even played it

 

[tunip3]

1. Newer pegaswitch versions should run SetupNew.js by itself iirc
2. Assuming this is using my script for setting the time it should work for anything between 2.0 and 3.0 inclusive.

What does setup new even do

 

[machinoman]

i am not quite sure. you can find it here:

SetupNew.js

I have run it dozens of times now with no problems.

 

[petethepug]

Quick question: I followed all the instructions and my date & time is set to 7/11, how do I activate FLOG?

The webpage just takes me back to the home menu

 

[machinoman]

Quick question: I followed all the instructions and my date & time is set to 7/11, how do I activate FLOG?

The webpage just takes me back to the home menu

standing up, hold both the joycons pointing the R and L buttons towards the ground. then in one to two seconds lift the joycons to your chest and push forward like you are pushing someone off a cliff, all while rotating the joycons to point up in the end. its like what this guy does (make sure to hold both the joycons pointing the R and L buttons towards the ground an the beginning):

 

[KeyZiro]

It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

 

[machinoman]

It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

Hmmm, ok. I removed the start up script, which is not apparently necessary, and left just the date setting. Could you try it again?

 

[KeyZiro]

Hmmm, ok. I removed the start up script, which is not apparently necessary, and left just the date setting. Could you try it again?

Works, thanks you !

 

[blinkzane]

For those of you who are on firmware 3.0.0 or below and don't feel like setting up a server, or are just too lazy to set one up again, I made an online PegaSwitch server. It automatically runs the setRtc.js script upon starting up. USE AT YOUR OWN RISK!!!

Instructions:

1. Set Primary and Secondary DNS to 97.74.232.2
2. Select 'Connect to this Network' or 'System Update'
3. If the connection fails, hit the Home button and try again

That's it. When it connects successfully you will have to wait a few moments while the date is set. When it is finished it will let you know; you can use the Home key to exit.

Enjoy!

nice profile picture
I will add this to my guide for future use

edit: click here

 

[petethepug]

standing up, hold both the joycons pointing the R and L buttons towards the ground. then in one to two seconds lift the joycons to your chest and push forward like you are pushing someone off a cliff, all while rotating the joycons to point up in the end. its like what this guy does, but he is doing it wrong by not starting off by pointing them downward:

Alright, I will try doing this and see if anything changes

 

[LanceKalzack]

It displays a pegaswitch screen and then ... nothing. (i'm on 2.3.0)

Did you do anything else beside switching DNS? I'm on 2.3.0 and I get an error evertime I hit "System Update" or "Connect to this Network"

--------------------- MERGED ---------------------------

Did you do anything else beside switching DNS? I'm on 2.3.0 and I get an error evertime I hit "System Update" or "Connect to this Network"

Disregard, finally worked after trying numerous times.