NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info

@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?

This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?

  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ

Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,

TheCyberQuake

Certified Geek
Member
Joined
Dec 2, 2014
Messages
5,012
Trophies
1
Age
28
Location
Las Vegas, Nevada
XP
4,433
Country
United States
Does anyone know of a .3dsx homebrew to dump dspfirm? I can't find any that work, only working CIA versions. It would make life easier for the pack I'm trying to finish up. Otherwise I would have to include installing DSP1.cia which I'd prefer to not do if possible. If I can find a 3dsx version tonight I should be able to release before I go to bed tonight.
Nevermind. I found if you manually compile zoogie's DSP1 you get a 3dsx version that works with rosalina. I should be able to get this pack out tonight, though I need to finalize a few things first.
 
Last edited by TheCyberQuake,

GhostLatte

GBAtemp's Official Van Master™
Member
GBAtemp Patron
Joined
Mar 26, 2015
Messages
3,651
Trophies
3
Age
24
XP
11,180
Country
United States
This is really odd but my O3DS turns black and instantly turns off when I do the button combination with the magnet placed on it.

Nevermind, I figured out what the problem was.
 
Last edited by GhostLatte,

annson24

The Patient One
Member
Joined
May 5, 2016
Messages
1,191
Trophies
0
Age
32
XP
1,843
Country
Philippines
Does anyone know of a .3dsx homebrew to dump dspfirm? I can't find any that work, only working CIA versions. It would make life easier for the pack I'm trying to finish up. Otherwise I would have to include installing DSP1.cia which I'd prefer to not do if possible. If I can find a 3dsx version tonight I should be able to release before I go to bed tonight.
Nevermind. I found if you manually compile zoogie's DSP1 you get a 3dsx version that works with rosalina. I should be able to get this pack out tonight, though I need to finalize a few things first.
How about THIS ?

EDIT: nvm.
 

Yerkz

Well-Known Member
Newcomer
Joined
Nov 17, 2016
Messages
97
Trophies
0
Age
25
XP
1,282
Country
Brazil
I tested the NTRBoot on my R4i Gold here on my Old 2DS and it worked, it booted on SafeB9SInstaller. But my 2DS already has Boot9Strap (I just wanted to test). I wanna know if it really worked or just booted properly because my 2DS is already hacked.
Unfortunately I do not have a Stock 3DS here to test.
 

VashTS

Beat it, son
Member
Joined
Mar 14, 2009
Messages
4,308
Trophies
1
Age
39
Location
Upstate NY
XP
3,767
Country
United States
I tested the NTRBoot on my R4i Gold here on my Old 2DS and it worked, it booted on SafeB9SInstaller. But my 2DS already has Boot9Strap (I just wanted to test). I wanna know if it really worked or just booted properly because my 2DS is already hacked.
Unfortunately I do not have a Stock 3DS here to test.

Flash this to your cart - https://gbatemp.net/threads/ntrboot-is-out.480586/page-10#post-7508890

instead of putting the normal boot9strap installer in the /ntrboot/ folder just put this one in there and the flasher will load this onto your DS Flashcart.

it will boot a file called ntrboot.firm from sd card root.

great way to test since normal b9s boots a file called boot.firm on the root. i actually prefer this method and am sticking with it unless something better comes along. keeps my files separate from each out. this should actually be fleshed out in the OP as it would help the testing process for normal users.
 

Yerkz

Well-Known Member
Newcomer
Joined
Nov 17, 2016
Messages
97
Trophies
0
Age
25
XP
1,282
Country
Brazil
Flash this to your cart - https://gbatemp.net/threads/ntrboot-is-out.480586/page-10#post-7508890

instead of putting the normal boot9strap installer in the /ntrboot/ folder just put this one in there and the flasher will load this onto your DS Flashcart.

it will boot a file called ntrboot.firm from sd card root.

great way to test since normal b9s boots a file called boot.firm on the root. i actually prefer this method and am sticking with it unless something better comes along. keeps my files separate from each out. this should actually be fleshed out in the OP as it would help the testing process for normal users.
I wouldn't care about trying this, but my R4 is "bricked"?? It does not recognized by any DS system, but when i tried to use it as ntrboot card, worked. Since looks like it's working, I will avoid flashing a lot of firmwares on this. If nobody knows that, I'll just wait for my N3DS XL and try it. But thanks for answering me anyway.
 

rileysrjay

Connoisseur of all things Morshu
Member
Joined
Apr 2, 2016
Messages
1,121
Trophies
1
Age
23
Location
Koridai
XP
2,285
Country
United States

Hyura

Well-Known Member
Member
Joined
Mar 23, 2013
Messages
399
Trophies
0
Age
31
XP
206
Country
Brazil
We pretty much can't support DStwo without either help from the manufacturer or extensive reverse engineering. The DStwo is a complex device.

I hope the Supercard team come around and help develop ntrboot for it. I really don't want to buy another flashcard, haha.

I found these two flashcards available near me: R4i Dual-Core 2017 and R4i Gold PRO. Would any of them work?

Not sure if the Gold Pro is the same thing.
 
Last edited by Hyura,

Dave_Chad

Well-Known Member
Member
Joined
Jun 29, 2016
Messages
741
Trophies
0
Age
37
XP
2,341
Country
Again for the two recent posters...

NO R4 DUAL CORE SUPPORT YEY.

I'm waiting too but patiently reading each day. What comes first my r4 gold from China or support for the dual cores...

Sent from my HTC U11 using Tapatalk
 
  • Like
Reactions: ossay78

BerserkLeon

Not-so-new member
Member
Joined
Mar 22, 2010
Messages
460
Trophies
1
Age
34
Location
Pennsylvania
XP
538
Country
United States
... I've got a dstwo somewhere but also a SuperCard DSOnei mini. Any chance on that one? I think I tossed my ak2i cuz the microsd kept coming out or just not reading.
 

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
I wouldn't care about trying this, but my R4 is "bricked"?? It does not recognized by any DS system, but when i tried to use it as ntrboot card, worked. Since looks like it's working, I will avoid flashing a lot of firmwares on this. If nobody knows that, I'll just wait for my N3DS XL and try it. But thanks for answering me anyway.
What do you mean bricked? Did it not work in your DS before you flashed it? Asking because only the AceKard2i keeps it's flashcard functionality after flashing *HaX*. The R4i stops working as a flashcard until you reflash the backup firmware you made; it doesn't brick.
 

Yerkz

Well-Known Member
Newcomer
Joined
Nov 17, 2016
Messages
97
Trophies
0
Age
25
XP
1,282
Country
Brazil
What do you mean bricked? Did it not work in your DS before you flashed it? Asking because only the AceKard2i keeps it's flashcard functionality after flashing *HaX*. The R4i stops working as a flashcard until you reflash the backup firmware you made; it doesn't brick.
I bought it this week and it worked for just one day and suddenly stopped! I don't know why, but my DSi and my Old 2DS does not recognize it anymore. Only the ntrbootflasher recognizes it, but I was testing it here and first I thought that for ntrboothax it worked, but I was wrong, even for this it does not work. I tried 4 different backup.bin that I found here on GBATemp, but none of them worked.
 

Majickhat55

The Red Woman
Member
Joined
Mar 28, 2016
Messages
4,936
Trophies
1
Age
36
Location
Asshai
XP
2,958
Country
United States
I bought it this week and it worked for just one day and suddenly stopped! I don't know why, but my DSi and my Old 2DS does not recognize it anymore. Only the ntrbootflasher recognizes it, but I was testing it here and first I thought that for ntrboothax it worked, but I was wrong, even for this it does not work. I tried 4 different backup.bin that I found here on GBATemp, but none of them worked.
Damn that sucks, where did you get the card? Maybe it's a clone and that's why it never worked like it should. I have the R4i Gold RTS myself and I've never had an issue with WoodR4 on stock consoles, or CFW. NTRHax works great as well.
 

Yerkz

Well-Known Member
Newcomer
Joined
Nov 17, 2016
Messages
97
Trophies
0
Age
25
XP
1,282
Country
Brazil
Damn that sucks, where did you get the card? Maybe it's a clone and that's why it never worked like it should. I have the R4i Gold RTS myself and I've never had an issue with WoodR4 on stock consoles, or CFW. NTRHax works great as well.
I bought it on a small online store here in Brazil, but it is a good store, so I don't think it is fake. I'm not saying it's impossible, of course.
VetcR3f.jpg
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: https://youtu.be/C47IzqSZBsQ?si=C8FGHzAc8TRvcnvg