Hacking Best Way to Mod Any Wii: ModMii for Windows: Official Support Thread

Bloodlust · Jun 21, 2012

XFlak said:
uneek2o+di is available via ModMii

ModMii can build 8 types of neek:

sneek2o

sneek2o+di (currently unstable)

uneek2o

uneek2o+di

sneek

sneek+di

uneek

uneek+di

the default is to build the neek2o version of neek, to use the traditional neek, you need to disable the neek2o setting on ModMii's options page

edit:
note that uneek2o+di is also known as the neek2o version of uneek+di, similar naming conventions apply to other forms of neek. So basically if ModMii is building "uneek+di" and the neek2o option is enabled, essentially you're building what you and I have been referring to as "uneek2o+di"

So is the neek2o option is enabled by default, I have been compiling uneek2o+di all the while? Thanks

Anon10W1z · Jun 22, 2012

Bloodlust said:
XFlak said:

uneek2o+di is available via ModMii

ModMii can build 8 types of neek:

sneek2o

sneek2o+di (currently unstable)

uneek2o

uneek2o+di

sneek

sneek+di

uneek

uneek+di

the default is to build the neek2o version of neek, to use the traditional neek, you need to disable the neek2o setting on ModMii's options page

edit:
note that uneek2o+di is also known as the neek2o version of uneek+di, similar naming conventions apply to other forms of neek. So basically if ModMii is building "uneek+di" and the neek2o option is enabled, essentially you're building what you and I have been referring to as "uneek2o+di"

Click to expand...

So is the neek2o option is enabled by default, I have been compiling uneek2o+di all the while? Thanks

Yep. AFAIK ModMii enables it by default.

XFlak · Jun 22, 2012

Anon10W1z said:
Bloodlust said:

XFlak said:

uneek2o+di is available via ModMii

...snip...

the default is to build the neek2o version of neek, to use the traditional neek, you need to disable the neek2o setting on ModMii's options page

...snip...

Click to expand...

So is the neek2o option is enabled by default, I have been compiling uneek2o+di all the while? Thanks

Click to expand...

Yep. AFAIK ModMii enables it by default.

ya don't say?

lol

Oddbrother · Jun 22, 2012

Easter egg hunt is over because Chuck Norris demands it.

And I was just about to donate, too.

XFlak · Jun 22, 2012

Oddbrother said:
Easter egg hunt is over because Chuck Norris demands it.

Click to expand...

And I was just about to donate, too.

XFlak said:
Hi everyone!

I'm getting some emails from people asking if they can send me donations. I'd like to reiterate that I am no longer accepting donations for ModMii... but I am particpating in a charity bike ride for MS this September (to support my mother who has MS). If you would like to help sponsor me in my bike ride for MS, send me an email at "[email protected]" for details. Note that all transactions will be processed directly by the MS society webpage and 100% of it will go to the cause.

This is totally unrelated to ModMii, I am just using my "XFlak" nick to spread the word. Thanks!

Bloodlust · Jun 22, 2012

Anon10W1z said:
Bloodlust said:

XFlak said:

uneek2o+di is available via ModMii

ModMii can build 8 types of neek:

sneek2o

sneek2o+di (currently unstable)

uneek2o

uneek2o+di

sneek

sneek+di

uneek

uneek+di

the default is to build the neek2o version of neek, to use the traditional neek, you need to disable the neek2o setting on ModMii's options page

edit:
note that uneek2o+di is also known as the neek2o version of uneek+di, similar naming conventions apply to other forms of neek. So basically if ModMii is building "uneek+di" and the neek2o option is enabled, essentially you're building what you and I have been referring to as "uneek2o+di"

Click to expand...

So is the neek2o option is enabled by default, I have been compiling uneek2o+di all the while? Thanks

Click to expand...

Yep. AFAIK ModMii enables it by default.

XFlak said:
Anon10W1z said:

Bloodlust said:

XFlak said:

uneek2o+di is available via ModMii

...snip...

the default is to build the neek2o version of neek, to use the traditional neek, you need to disable the neek2o setting on ModMii's options page

...snip...

Click to expand...

So is the neek2o option is enabled by default, I have been compiling uneek2o+di all the while? Thanks

Click to expand...

Yep. AFAIK ModMii enables it by default.

Click to expand...

ya don't say?

lol

Thanks... will try out again and report back..

Bloodlust · Jun 22, 2012

Ok, finally managed to get uneek2o+DI working. Thanks to all the helpful bros who assisted me from this topic.

robbo32 · Jun 23, 2012

so iam having problems booting some newer games from DVDR,,,,if i install this modmii hack,,,will the games that iam having problems with run using this hack?,,,,,,and would i then be best to take out the chip inside the wii?,,,my wii has never been softmodded,just had a chip_clip instsalled but most new games are giving me the error refer to wii manual!,,,,,any help thanks guys

XFlak · Jun 23, 2012

I'm not that knowledgeable about modchips, but u can use modmii to load your games off of a USB hard drive. If you insist on continuing to load games off of backup discs, after using ModMii u'll probably need to load the disc's via a loader like neogamma (not the main system menu anymore, although I'm not sure if with your modchip u might still be able to). If you want to definitely load games via the disc channel, u can install neocorp or darkcorp (neither supported by ModMii as usb-loading is superior).

b17bomber · Jun 24, 2012

So if I set up the Neek that disables the disc drive for games, do I just not use the emulated nand if I still want to use the disc drive? I'm new to nand emulation..

Bloodlust · Jun 24, 2012

Hi xflak, since I'm not getting a reply in the neek2o thread, thought I'll ask here instead :

1) After getting nee2o+DI to work, can I install wiiware wads normally without using mighty channels? Since there's no HBC installed, how do I install a wad manager?
2) Is priiloader already preinstalled with hacks_hash.ini (I already selected "yes" to installing priiloader during the uneek2o+DI in modmii)? I just need to hold on to reset before the emulated nand starts up?
3) I am using the JPN 4.3 emu nand by default and US games don't show up in the wbfs folder, if I install priiloader hacks will it appear? Or do I still need to bootup to the firmware which corresponds to the game region?
4) Does uneek2o support SDHC cards? Currently I'm using a 1gb SDcard formatted with 16kb clusters and it works just fine..

Thanks..

XFlak · Jun 24, 2012

@roboo, basically yes. Although there are ways to rip discs while in the neek environment, generally speaking you shouldn't need to access the dvd drive often via neek.

Bloodlust said:
Hi xflak, since I'm not getting a reply in the neek2o thread, thought I'll ask here instead :

1) After getting nee2o+DI to work, can I install wiiware wads normally without using mighty channels? Since there's no HBC installed, how do I install a wad manager?
you can install WADs using ShowMiiWads or ModMii's emulated nand modifier on your PC. Also, u can install postloader or the homebrew filter to your emunand to use instead of the HBC or u can install the HBC using instructions from here. Also, once u get postloader or some other HBC replacement running on your emunand, u can use THIS neek compatible wad manager if you want (I still prefer editing my emunand on my PC)

2) Is priiloader already preinstalled with hacks_hash.ini (I already selected "yes" to installing priiloader during the uneek2o+DI in modmii)? I just need to hold on to reset before the emulated nand starts up?
correct
3) I am using the JPN 4.3 emu nand by default and US games don't show up in the wbfs folder, if I install priiloader hacks will it appear? Or do I still need to bootup to the firmware which corresponds to the game region?
not sure, try it out and let me know. I know that using postloader it is supposed to detect the region of game and the region of nands available and load the game using the appropriate nand so it takes out all the guess work.
4) Does uneek2o support SDHC cards? Currently I'm using a 1gb SDcard formatted with 16kb clusters and it works just fine..
uneek2o stores the nand on a USB hdd, not an sd card.
Thanks..

b17bomber · Jun 25, 2012

I managed to dump my nand to sneek. But when I try to load homebrew channel, it goes to the hackmii installer screen, and just seems to stop there. On my original wii, it was already installed.

XFlak · Jun 25, 2012

see the link from my previous post for instructions on installing the HBC to an emulated nand (fyi, it's easier to just use postloader or some other HBC replacement instead for emunands)

Anon10W1z · Jun 25, 2012

b17bomber said:
I managed to dump my nand to sneek. But when I try to load homebrew channel, it goes to the hackmii installer screen, and just seems to stop there. On my original wii, it was already installed.

Well I had the same issue, follow XFlak's post if you want it to work.

P.S. Postloader is a better alternative to the HBC. ModMii can install it's channel to your emu NAND.

robbo32 · Jun 25, 2012

XFlak said:
@roboo, basically yes. Although there are ways to rip discs while in the neek environment, generally speaking you shouldn't need to access the dvd drive often via neek.

Bloodlust said:

Hi xflak, since I'm not getting a reply in the neek2o thread, thought I'll ask here instead :

1) After getting nee2o+DI to work, can I install wiiware wads normally without using mighty channels? Since there's no HBC installed, how do I install a wad manager?
you can install WADs using ShowMiiWads or ModMii's emulated nand modifier on your PC. Also, u can install postloader or the homebrew filter to your emunand to use instead of the HBC or u can install the HBC using instructions from here. Also, once u get postloader or some other HBC replacement running on your emunand, u can use THIS neek compatible wad manager if you want (I still prefer editing my emunand on my PC)

2) Is priiloader already preinstalled with hacks_hash.ini (I already selected "yes" to installing priiloader during the uneek2o+DI in modmii)? I just need to hold on to reset before the emulated nand starts up?
correct
3) I am using the JPN 4.3 emu nand by default and US games don't show up in the wbfs folder, if I install priiloader hacks will it appear? Or do I still need to bootup to the firmware which corresponds to the game region?
not sure, try it out and let me know. I know that using postloader it is supposed to detect the region of game and the region of nands available and load the game using the appropriate nand so it takes out all the guess work.
4) Does uneek2o support SDHC cards? Currently I'm using a 1gb SDcard formatted with 16kb clusters and it works just fine..
uneek2o stores the nand on a USB hdd, not an sd card.
Thanks..

Click to expand...

thanks for the help

Bloodlust · Jun 26, 2012

Thanks again for your advice

XFlak said:
@roboo, basically yes. Although there are ways to rip discs while in the neek environment, generally speaking you shouldn't need to access the dvd drive often via neek.

Bloodlust said:

Hi xflak, since I'm not getting a reply in the neek2o thread, thought I'll ask here instead :

1) After getting nee2o+DI to work, can I install wiiware wads normally without using mighty channels? Since there's no HBC installed, how do I install a wad manager?
you can install WADs using ShowMiiWads or ModMii's emulated nand modifier on your PC. Also, u can install postloader or the homebrew filter to your emunand to use instead of the HBC or u can install the HBC using instructions from here. Also, once u get postloader or some other HBC replacement running on your emunand, u can use THIS neek compatible wad manager if you want (I still prefer editing my emunand on my PC)

2) Is priiloader already preinstalled with hacks_hash.ini (I already selected "yes" to installing priiloader during the uneek2o+DI in modmii)? I just need to hold on to reset before the emulated nand starts up?
correct
3) I am using the JPN 4.3 emu nand by default and US games don't show up in the wbfs folder, if I install priiloader hacks will it appear? Or do I still need to bootup to the firmware which corresponds to the game region?
not sure, try it out and let me know. I know that using postloader it is supposed to detect the region of game and the region of nands available and load the game using the appropriate nand so it takes out all the guess work.
4) Does uneek2o support SDHC cards? Currently I'm using a 1gb SDcard formatted with 16kb clusters and it works just fine..
uneek2o stores the nand on a USB hdd, not an sd card.
Thanks..

Click to expand...

Digital1980 · Jun 26, 2012

stfour said:
Digital1980 said:

"postloader launches ok and then hangs at the Please wait....Loading screen."

Click to expand...

Download the new forwarder channel (uploaded yesterday) from google code > ... it should solve your problem. Let me know if it works for you.

it worked!

Thanks stfour

stfour · Jun 26, 2012

LOL, just 5 months

ciris · Jul 4, 2012

Damn!!! I've been out of the scene a good little while and I come back and find that GC USB loading is possible and ModMii has been revamped since I last used it. Great work XFlak! You da man!

Hacking Best Way to Mod Any Wii: ModMii for Windows: Official Support Thread

Did ModMii work for you?

Yes!

No, and I won't report what went wrong because I am a troll

No, and I posted what went wrong

Well-Known Member

Well-Known Member

Wiitired but still kicking

New Member

Wiitired but still kicking

Well-Known Member

Well-Known Member

Member

Wiitired but still kicking

Well-Known Member

Well-Known Member

Wiitired but still kicking

Well-Known Member

Wiitired but still kicking

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum