Little off topic, but didn't know where else to ask. With the leaked 007 remaster that leaked while back, was it the full source code that leaked? And if so, is it theorically possible to port it to other devices like the Switch/ Vita. Like the Mario 64/ GTA's port were done while back?
Thanks for the thread link. I didn't know that a save editor for Skyward Sword has somewhat been unsuccessful. Does anyone know if there is a "starter save" for that game with things like max hearts and rupees? I have a save at end of game, but wanted to play through what I can on own. Thoughts and help appreciated [emoji846]
this is entirely new ground you are looking to discover. You will probably want to join one of the discord channels and help with their ongoing hacking efforts.
Thanks for the thread link. I didn't know that a save editor for Skyward Sword has somewhat been unsuccessful. Does anyone know if there is a "starter save" for that game with things like max hearts and rupees? I have a save at end of game, but wanted to play through what I can on own. Thoughts and help appreciated [emoji846]
Wildly successful in Wii. Completely unsuccessful on Switch. Maybe this Can be your new calling and you can figure out the key where others have failed?
Since there is no viable editor I don’t imagine there would be people playing the game to get specifically where you would like to be in game just to create a special save. Most save files are going to be 100% completion as that is the more common goal. good luck on your search!
Some do. Some dont. Goldeneye does. WaveRace64 does. Smash64 does. But others don't play at all and do play in retroarch. One example of this is Diddy Kong Racing. It plays (decently, not great) in retroarch but worse in Nintendo Switch Online. Same with Conkers Bad Fur Day. It wont play at all in Nintendo Switch Online but does in retroarch. To have a decent experience, you do kind of need both.
Some do. Some dont. Goldeneye does. WaveRace64 does. Smash64 does. But others don't play at all and do play in retroarch. One example of this is Diddy Kong Racing. It plays (decently, not great) in retroarch but worse in Nintendo Switch Online. Same with Conkers Bad Fur Day. It wont play at all in Nintendo Switch Online but does in retroarch. To have a decent experience, you do kind of need both.
Official Nintendo account seems to be linked, confirmed by going to Settings>Users and seeing my email listed there instead of "Link Nintendo Account". I do have two other users set up in the system which are not linked, but I never use these launching/playing games.
Autoboot set to 1 means what exactly? what file does it look for and does it affect the FastSWITCH? why is it loading SD of Hekate while booting Atmosphere when choosing just hekate? btw my hekate.ipl is something I took from you.
Autoboot set to 1 means what exactly? what file does it look for and does it affect the FastSWITCH? why is it loading SD of Hekate while booting Atmosphere when choosing just hekate? btw my hekate.ipl is something I took from you.
Autoboot set to 1 means what exactly? what file does it look for and does it affect the FastSWITCH? why is it loading SD of Hekate while booting Atmosphere when choosing just hekate?
basically having it set to 1 means it will boot to the first option automatically, without you selecting an option. Aka auto booting. Your first option is to boot CFW on Emunand…so it dutifully does just that when fastCFWSwitch boots to Hekate.
That’s kinda why I know why it’s behaving like that. :-)
I like to automate things to do what I do 99% of the time with an option to override it for the 1% of the time when I want to do something else. If you use my config.ini as well (remove sections you don’t have such as SXOS and Lakka for instance) it will all work together.
I have a friend who has this problem the SL&SR buttons in both joycons don't work if pressed to be able to play in 2,but all the others work even when they are disconnected from the Switch(V1 low serial),precise last OFW and CFW installed, how can it solve?
I have a friend who has this problem the SL&SR buttons in both joycons don't work if pressed to be able to play in 2,but all the others work even when they are disconnected from the Switch(V1 low serial),precise last OFW and CFW installed, how can it solve?
Do the (S) buttons work if you pair your joycons (that presumably work properly in your Switch) to their Switch or is that what you mean by “all others work”? “All others” being another set of joycons.
So other joycons do work? It’s just this pair that don’t work? Sounds really odd that both of them are misbehaving at the same time. Try pairing them up to a PC running joycon toolkit. Will get a link…one second.
This will tell you if the buttons are actually working but there’s something on the Switch that’s masking them. The PC wont have the same blocking. It will respond to everything.
So other joycons do work? It’s just this pair that don’t work? Sounds really odd that both of them are misbehaving at the same time. Try pairing them up to a PC running jctoolbox. Will get a link…one second.
My controller is not responding properly. How do I know if the button configuration has been remapped or disabled?
Throughout different menus, a wrench icon will be displayed beside the controller in-use at the bottom-left corner of the system screen to indicate that there is a custom button configuration for one or more controllers. This means that one or more button inputs have been remapped or disabled.
Button Mapping: Joy-Con controllers attached to the system showing a wrench icon
Button Mapping: Joy-Con controllers detached from the system showing a wrench icon
My controller is not responding properly. How do I know if the button configuration has been remapped or disabled?
Throughout different menus, a wrench icon will be displayed beside the controller in-use at the bottom-left corner of the system screen to indicate that there is a custom button configuration for one or more controllers. This means that one or more button inputs have been remapped or disabled.
Button Mapping: Joy-Con controllers attached to the system showing a wrench icon
Button Mapping: Joy-Con controllers detached from the system showing a wrench icon
basically having it set to 1 means it will boot to the first option automatically, without you selecting an option. Aka auto booting. Your first option is to boot CFW on Emunand…so it dutifully does just that when fastCFWSwitch boots to Hekate.
That’s kinda why I know why it’s behaving like that. :-)
I like to automate things to do what I do 99% of the time with an option to override it for the 1% of the time when I want to do something else. If you use my config.ini as well (remove sections you don’t have such as SXOS and Lakka for instance) it will all work together.
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...