ROM Hack Xenoblade Chronicles 3 Graphics Settings

[LucisCaelum]

Try with 1.2, has lower blur effect and the battles runs better.

I am using 1.2, I'll try the newly added 1.3 and see if its better

 

[DunArd]

looks better than 1.2 and runs smoothly most of the time. thank you very much!
Also, would disabling/lowering blur even more have a positive effect on performance?

From what I tested, lowering the values more, at least in the zones where I check it, is inappreciable for the performance

 

[Lyzard]

From what I tested, lowering the values more, at least in the zones where I check it, is inappreciable for the performance

lowering blur makes the game looks much much better. you can try deathblade200's preset. but it makes fps drops to 20 especially in cutscenes. I think we have to OC our ram values to prevent this but i can't manage to do it. i wonder if there is any way to make it with without overclocking a ram...

 

[deathblade200]

lowering blur makes the game looks much much better. you can try deathblade200's preset. but it makes fps drops to 20 especially in cutscenes. I think we have to OC our ram values to prevent this but i can't manage to do it. i wonder if there is any way to make it with without overclocking a ram...

personally I couldn't imagine playing this game (or any switch game really) without the ram overclock it alone makes a big difference with performance. the ram overclock is very simple to do even for the unknowledgable https://github.com/KazushiMe/Switch-OC-Suite

 

[Lyzard]

personally I couldn't imagine playing this game (or any switch game really) without the ram overclock it alone makes a big difference with performance. the ram overclock is very simple to do even for the unknowledgable

well, no offense but sometimes ppl here thinks everyone as ''expert'' i think. your simple can be very hard for me.
about ram overclock, there is only 1 guide video on YT and it seems outdated.

 

[deathblade200]

well, no offense but sometimes ppl here thinks everyone as ''expert'' i think. your simple can be very hard for me.
about ram overclock, there is only 1 guide video on YT and it seems outdated.

I didn't say expert thats the exact opposite of unknowledgable lol . reading that github page I posted tells you everything you need other than the fact you need to use FSS0 instead of fusee

 

[deathblade200]

for those that dont known Hazerou made cheats for 60FPS and resolution. just don't expect much from the 60FPS cheat without greatly lowering the resolution https://www.mediafire.com/file/lz8dh6ghdcnyvo1/xc3.rar/file. also it seems handheld is 720P max res and docked is 1080P.

 

[DunArd]

personally I couldn't imagine playing this game (or any switch game really) without the ram overclock it alone makes a big difference with performance. the ram overclock is very simple to do even for the unknowledgable https://github.com/KazushiMe/Switch-OC-Suite

But you need a V2 (Mariko?) to OC RAM more than 1600MHz, with V1 is impossible, isn't it?

 

[deathblade200]

But you need a V2 (Mariko?) to OC RAM more than 1600MHz, with V1 is impossible, isn't it?

I use an erista so no this isn't true

 

[Medel87]

But you need a V2 (Mariko?) to OC RAM more than 1600MHz, with V1 is impossible, isn't it?

You can OC erista RAM to 1862 without problems, and with stock voltage, all are advantages

 

[LucisCaelum]

You can OC erista RAM to 1862 without problems, and with stock voltage, all are advantages

Can you OC Erista models on 1996?

 

[deathblade200]

Can you OC Erista models on 1996?

does nothing beyond 1862

 

[Medel87]

Can you OC Erista models on 1996?

You can if compile it yourself, but It's not recommended, you must overvolt it, and not all switch support it, and the benefit is minimal

 

[cobjak]

Honestly I'm not sensitive to it, every time I see recommandations to overclock so I try with and without and I see 0 difference .

So you are saying that overclock to 1800 ram will improve graphics on every games and causes 0 negative effect to the switch?? ?

 

[deathblade200]

Honestly I'm not sensitive to it, every time I see recommandations to overclock so I try with and without and I see 0 difference .

So you are saying that overclock to 1800 ram will improve graphics on every games and causes 0 negative effect to the switch?? ?

to put it simple its free FPS and can even allow lower overclocks in games

 

[Medel87]

Honestly I'm not sensitive to it, every time I see recommandations to overclock so I try with and without and I see 0 difference .

So you are saying that overclock to 1800 ram will improve graphics on every games and causes 0 negative effect to the switch?? ?

Yes, because ram is the most bottleneck on switch, it will improve data transfer speed, so you will need less OC on CPU/GPU to get same result

 

[Lyzard]

So i FINALLY able to overclock my ram to 1862 and omg! the difference is huge!
fps is stable 30 in wide areas. flies from 20 to 30 in cutscenes and maxed zoom in colonies. using deathblade200's 0.1 blur preset (it looks amazing).
thanks for your effort guys

 

[Medel87]

So i FINALLY able to overclock my ram to 1862 and omg! the difference is huge!
fps is stable 30 in wide areas. flies from 20 to 30 in cutscenes and maxed zoom in colonies. using deathblade200's 0.1 blur preset (it looks amazing).
thanks for your effort guys

I'm trying a 0.0 blur version from @deathblade200 and, or I don't know where I must look to see dark flashes in cutscenes, or it works like a charm, hahaha

 

[Chrisssj2]

How possible would it be to increase foliage/grass LOD? It feels much lower than 2 in this game but that may just be my memory.

personally I couldn't imagine playing this game (or any switch game really) without the ram overclock it alone makes a big difference with performance. the ram overclock is very simple to do even for the unknowledgable https://github.com/KazushiMe/Switch-OC-Suite

1995 MHZ enough or need 2133 mhz?

 

[deathblade200]

1995 MHZ enough or need 2133 mhz?

neither will do anything on erista 1862 is the limit