Hacking SWITCH NOOB PARADISE - Ask questions here

[urherenow]

Is there a way to customise the album icon atmosphere? Hold L or R when pressing the icon to go in HBL?

To open HBL with full app permissions and memory access, you want to hold R while opening an actual game, and HBL will load. To change the Album icon would be a theme thing, and I don't like themes because they cause noobs nothing but problems when they install a bad/old one or update the firmware with one installed.

 

[urherenow]

your hekate_ipl.ini looks good. It must but that you’ve managed to corrupt your emmunand. It might be best to start from scratch at this point.



[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp[/TD]
[/TR]
[/TABLE]


By default stock=0 emmunand_force_disable =0 so you don’t need to call them out specifically to boot into emunand.

What are you even talking about? There is no emunand selection even in there.

 

[Zap2000]

Well, as you can see, there is nothing in here that says emuMMC which explains why you aren't booting emuMMC. If you want to boot emuMMC, you will need a profile in your hekate_ipl.ini file that can boot emuMMC. You can download one from here

​

this is so werid they give this in the guide​

How to set up emuNAND with Atmosphere on Erista (Unpatched)​

 

[Draxzelex]

​

this is so werid they give this in the guide​

How to set up emuNAND with Atmosphere on Erista (Unpatched)​

That is why I linked you another guide

 

[Zap2000]

That is why I linked you another guide

ok i know i wish i never sent to that guide in first place can u send me to the is there a noob step by step there?

 

[binkinator]

What are you even talking about? There is no emunand selection even in there.

I’m talking about the reentry docs here: https://rentry.org/SwitchHackingIsEasy

It’s how I have my currently running switch set up at the moment as well.

If you don’t specify it defaults to emunand.

Give it a try and you’ll see.

 

[Draxzelex]

ok i know i wish i never sent to that guide in first place can u send me to the is there a noob step by step there?

The link I sent you is the guide I linked you to earlier.

 

[Zap2000]

I’m talking about the reentry docs here: https://rentry.org/SwitchHackingIsEasy

It’s how I have my currently running switch set up at the moment as well.

If you don’t specify it defaults to emunand.

Give it a try and you’ll see.

thats the one i followed and didnt work out for me im all confused now

i need someone take me through everything again

 

[binkinator]

ok i know i wish i never sent to that guide in first place can u send me to the is there a noob step by step there?

Try the guide posted by @Draxzelex. It might be more yiur speed.

 

[binkinator]

thats the one i followed and didnt work out for me im all confused now

i need someone take me through everything again

That was a response to @urherenow. Please ignore.

Work with @Draxzelex and use his guide.

 

[Zap2000]

That is why I linked you another guide

is this guide or files not outdated says

• atmosphere 0.17.1

 

[Draxzelex]

is this guide or files not outdated says

• atmosphere 0.17.1

Its not a big deal as we can easily update Atmosphere by downloading the latest files from the GitHub page. What I want is for all of the other files to be properly setup & updated.

 

[Zap2000]

Its not a big deal as we can easily update Atmosphere by downloading the latest files from the GitHub page. What I want is for all of the other files to be properly setup & updated.

yes i understand i seem not be able to open that v2.py : (

in that guide

 

[Zap2000]

if i grab what im told from https://www.sdsetup.com/console?switch

would that work or im i better to learn to open that file

 

[Zap2000]

i forgot to say i found a lead from my pro controller that i can use to connect to my pc telercmgui

i hope this makes it easyier to help me

 

[Draxzelex]

if i grab what im told from https://www.sdsetup.com/console?switch

would that work or im i better to learn to open that file

Since you're able to launch Hekate & subsequently Atmosphere, you should be fine grabbing a hekate_ipl.ini file from that site. If after downloading the hekate_ipl.ini file emuMMC is still not able to launch successfully, then you may not have partitioned your SD card to create an emuMMC partition. In that case, you can follow this guide on how to do so.

 

[Zap2000]

Since you're able to launch Hekate & subsequently Atmosphere, you should be fine grabbing a hekate_ipl.ini file from that site. If after downloading the hekate_ipl.ini file emuMMC is still not able to launch successfully, then you may not have partitioned your SD card to create an emuMMC partition. In that case, you can follow this guide on how to do so.

i was able to launch them yesurday with the sx os with your help just no emmunand and tinfoil install on sysnand

ok should i follow the https://rentry.org/SwitchHackingIsEasy or wat guide to get me that far?

 

[shinwg]

Right, but you are not running 13.2.1 FW. Is SXOS still not having issues using the GC? Want to make sure it’s not something that used to work but now doesn’t.

I’ll try today once I get off

Right, but you are not running 13.2.1 FW. Is SXOS still not having issues using the GC? Want to make sure it’s not something that used to work but now doesn’t.

yes gamecard work fine on Sxox on both ofw and cfw.

Right, but you are not running 13.2.1 FW. Is SXOS still not having issues using the GC? Want to make sure it’s not something that used to work but now doesn’t.

Right, but you are not running 13.2.1 FW. Is SXOS still not having issues using the GC? Want to make sure it’s not something that used to work but now doesn’t.

Right, but you are not running 13.2.1 FW. Is SXOS still not having issues using the GC? Want to make sure it’s not something that used to work but now doesn’t.

 

[Draxzelex]

i was able to launch them yesurday with the sx os with your help just no emmunand and tinfoil install on sysnand

ok should i follow the https://rentry.org/SwitchHackingIsEasy or wat guide to get me that far?

You don't need a guide at this point, you need a hekate_ipl.ini file with an emuMMC launch profile. Following that guide didn't get you one which is why I'm recommending you to download one from SDSetup.com instead.

 

[Zap2000]

You don't need a guide at this point, you need a hekate_ipl.ini file with an emuMMC launch profile. Following that guide didn't get you one which is why I'm recommending you to download one from SDSetup.com instead.

Is it in the right place?