Hacking SWITCH NOOB PARADISE - Ask questions here

[tommaloney]

Just hear me out on my thought,

Do we need a rcmloader if..... we have autorcm enabled and the system is docked with a usb stick plugged in to one of the USB ports? I am board silly and my mind is in overdrive...lol

 

[binkinator]

Just hear me out on my thought,

Do we need a rcmloader if..... we have autorcm enabled and the system is docked with a usb stick plugged in to one of the USB ports? I am board silly and my mind is in overdrive...lol

I hear where you’re going. A regular USB drive wouldn’t push a payload…even without the dock.
Would be a weird day if Ninty allowed that on purpose or even by accident.

It would be interesting to put a payload injector in the USB port and see if it would inject that way. I don’t think you’d need an update from Ninty to enable that though. Heck…I might try it.

 

[Hayato213]

Just hear me out on my thought,

Do we need a rcmloader if..... we have autorcm enabled and the system is docked with a usb stick plugged in to one of the USB ports? I am board silly and my mind is in overdrive...lol

Not with a USB thumb Drive you need something like a payload dongle instead while not docked, like RCM Loader One, NS Atmosphere Dongle, Dragon Injector.

 

[tommaloney]

how is the emuiibo compatibility and stability? is it worth using

 

[binkinator]

how is the emuiibo compatibility and stability? is it worth using

I‘ve used Emuiibo and AmiiSwap just for fun (filed it as a “cause-I-can” project.) Mostly just tweaking SMO, playing with the wedding suits and stuff like that. Didn’t encounter any stability issues but really only played with < 10 amiibos for a total of a couple hours.

 

[tommaloney]

ok well I think I will give it a try

Thanks,

 

[binkinator]

ok well I think I will give it a try

Thanks,

Install Tesla so you can use the overlay.

Good luck and have fun!

 

[tommaloney]

I don't know if this is a thing or not but is there a way to power up your virtual amigo's...lol might as well ask

 

[Draxzelex]

Nice. Wiping the console from maintenance mode did not require an internet connection. I backed up this new clean sysnand to replace my old backup.

Question though, I booted in to OFW Sysnand and I lost auto RCM? I had to use the jig again. Was this caused by restoring the NAND or does this just happen if you boot OFW in hekate. Does this mean if Hekate hmboots OFW I might get my fuses blown?

I guess now that my sysnand is clean I continue to use CFW with it just keep it clean and avoid bannable actions right? Use emunand for that type of stuff

Restoring a backup means you're essentially reverting the console to the state it was in when you made the backup (hence why its called a "backup"). If you didn't have AutoRCM enabled when you initially made the backup, restoring that backup will disable AutoRCM.

 

[binkinator]

I don't know if this is a thing or not but is there a way to power up your virtual amigo's...lol might as well ask

Not sure what that means in this context.

Maybe somebody else does?

 

[binkinator]

how is the emuiibo compatibility and stability? is it worth using

just installed amiibo emulation on my 3ds…I think I now realize why you were asking about stability. easy to crash the 3ds.

 

[tommaloney]

I read a lot of forums and watch a lot of YouTube on how to do different things with my console but nothing beats asking in a community like this because you get your answers fast and real up to date information. some of the time I know the answer but I like to make sure its still the current right answer.

 

[saito1234]

Can I install nsp files from Pendrive, while Switch is docked?
I have atmosphere.

 

[DonAndy321]

HI peeps,


It's been a couple of years since I have last updated.

I am currently running SX OS V2.9.3 and i am currently on fimrware 9.1.0.

Has the way things done in terms of homebrew etc, changed much?

Thanks

 

[Draxzelex]

Can I install nsp files from Pendrive, while Switch is docked?
I have atmosphere.

Yes, most if not all modern title manages have USB support.

HI peeps,


It's been a couple of years since I have last updated.

I am currently running SX OS V2.9.3 and i am currently on fimrware 9.1.0.

Has the way things done in terms of homebrew etc, changed much?

Thanks

The way in which we boot CFW will not change for a long time if ever because the exploit used is incredibly poweful and unpatchable via software. However SX OS hasn't received an update for about 2 years now so its safe to say they are dead & never coming back. This means you can only use SX OS up to firmware 11.0. I recommend switching to Atmosphere as newer games and content will require higher firmware versions. Setting up Atmosphere is about as simple as setting up SX OS; SX OS uses Atmosphere's source code after all.

 

[blaisedinsd]

Restoring a backup means you're essentially reverting the console to the state it was in when you made the backup (hence why its called a "backup"). If you didn't have AutoRCM enabled when you initially made the backup, restoring that backup will disable AutoRCM.

Thanks I was thinking that was the case.

So I can boot sysnand OFW from hekate and keep auto RCM enabled and not burn my fuses. If I don’t want to do any home brew on my sysnand is it better just to boot OFW? Will that help prevent making a mistake that causes a ban?

I am worried if I let my kids play CFW sysnand they might go in to album and do some hombrew accidentally. Alternatively can you change the behavior of the album in atmosphere? Can I make it need hold R to enter homebrew launcher instead of being the default ?

 

[DonAndy321]

Yes, most if not all modern title manages have USB support.

The way in which we boot CFW will not change for a long time if ever because the exploit used is incredibly poweful and unpatchable via software. However SX OS hasn't received an update for about 2 years now so its safe to say they are dead & never coming back. This means you can only use SX OS up to firmware 11.0. I recommend switching to Atmosphere as newer games and content will require higher firmware versions. Setting up Atmosphere is about as simple as setting up SX OS; SX OS uses Atmosphere's source code after all.

Ok thanks . Will give Atmosphere a go. Is it simple to setup and do I need to delete anything regarding SX OS?

 

[Draxzelex]

Ok thanks . Will give Atmosphere a go. Is it simple to setup and do I need to delete anything regarding SX OS?

Like I said, if you can setup SX OS, then you can setup Atmosphere. And SX OS is only one file that doesn't interfere with Atmosphere but if you want to free up some space on your SD card, you can delete the boot.dat file from your card.

 

[LUCKASS]

That link seems to be broken so I don’t know what options you’re looking at.

@Mena is 100% legit on the topic. Read his thread and ask questions there if you still have them after you’re done.

@Modzvilleusa is also an expert in his craft. He did a detailed video on everything you need to do, buy, think, look like and feel about modding v3 Aula (OLED). Watch his video and ask away there if you have questions afterwards.

Thanks I learnt a lot from this video. If I understood correctly, he is using the HWFLY Core + Oled 3.3v L cable.
Also, a reputable local modding console shop told me that they have SX original chip in stock and they can install it in my OLED with a new Firmware. He told me the SX chip are using better component compared to the HWFLY clones.

 

[binkinator]

Thanks I learnt a lot from this video. If I understood correctly, he is using the HWFLY Core + Oled 3.3v L cable.
Also, a reputable local modding console shop told me that they have SX original chip in stock and they can install it in my OLED with a new Firmware. He told me the SX chip are using better component compared to the HWFLY clones.

good Stuff!

There are clones that can be upgraded but yeah, if you can find an SX for a decent price, it’s better.