Hacking SWITCH NOOB PARADISE - Ask questions here

[spinal_cord]

Here's a question, after setting up emummc, I bought a game from the eshop. Can I transfer that somehow from sysmmc to emummc ?

 

[Blauhasenpopo]

Here's a question, after setting up emummc, I bought a game from the eshop. Can I transfer that somehow from sysmmc to emummc ?

https://github.com/DarkMatterCore/nxdumptool

Dump it from sysmmc and install it with the installer of your choice in emummc

 

[PauloLima]

Hi guys. I made this account recently and i´m a non english native, so bare with me.

My setup is:

Switch V1 not patched.
Used SXOS for maybe 2 years
Found a guide online to migrate to atms
Couldnt make Tegra work on PC (faulty USB port i premuse, since my USB devices are having problems latelly)
Used SXOS Dongle to inject fusee (not primary, using atms 1.2.5)

So right now everything is working kinda fine. My issues are:

1- i disable autorcm. I have a boot.dat file in the SD card to iniciate the SXOS payload. If i enable the autorcm will i be directed to the SXOS CFW?

2- can i enable autorcm and be directed to the fusee (atms)?

3- when i launch the fusee payload from the sxos "dongle menu" (payloader?) i see a message like this: fatal error ocurred, click power to reboot". I click power and atms gets launched. Is it normal?

Thanks for the atention, and im sorry if i is difficult to understand.

 

[doop]

Hi guys. I made this account recently and i´m a non english native, so bare with me.

My setup is:

Switch V1 not patched.
Used SXOS for maybe 2 years
Found a guide online to migrate to atms
Couldnt make Tegra work on PC (faulty USB port i premuse, since my USB devices are having problems latelly)
Used SXOS Dongle to inject fusee (not primary, using atms 1.2.5)

So right now everything is working kinda fine. My issues are:

1- i disable autorcm. I have a boot.dat file in the SD card to iniciate the SXOS payload. If i enable the autorcm will i be directed to the SXOS CFW?

2- can i enable autorcm and be directed to the fusee (atms)?

3- when i launch the fusee payload from the sxos "dongle menu" (payloader?) i see a message like this: fatal error ocurred, click power to reboot". I click power and atms gets launched. Is it normal?

Thanks for the atention, and im sorry if i is difficult to understand.

Why not remove anything sxos related on your sd card then see if you still have the error message.
Autorcm doesn`t auto boot a payload so with the sxos stuff removed Autorcm would boot to a black screen waiting for a payload.
If youre still using the usb loader you could use this tool to make a fusee boot.dat instead?
https://sx-boot-dat-creator.herokuapp.com/

 

[PauloLima]

Why not remove anything sxos related on your sd card then see if you still have the error message. Autorcm doesn`t auto boot a payload so with the sxos stuff removed Autorcm would boot to a black screen waiting for a payload. If youre still using the usb loader you could use this tool to make a fusee boot.dat instead?

Thank you for the response.

If i remove the boot dat file the screen goes black with red letters sayng "BOOT DAT".

my reaserch showed that the sxos dongle only recognize boot dat files, that sxos use, is that correct? I by creating a fusee boot dat file i would circle that around and "force" the dongle to lauch atms. Is that it?

 

[doop]

Thank you for the response.

If i remove the boot dat file the screen goes black with red letters sayng "BOOT DAT".

my reaserch showed that the sxos dongle only recognize boot dat files, that sxos use, is that correct? I by creating a fusee boot dat file i would circle that around and "force" the dongle to lauch atms. Is that it?

Yes thats it.

 

[PauloLima]

Yes thats it.

It worked, thank you. It now loads atms directly.

On another topic: i just got my hand on a friends laptop. The switch is not recognized either. I installed the tegra drivers and the zadig on both pcs, and still nothing. Tried multiple ports and 3 cables.

What could it be? The switch docks correctly, the dongle works....

Edit: just to clarify, i want to connect to the pc to install NSP and maybe a NUT server, no to boot the paylod, since it im using the dongle.

Edit 2: i know i can use the SD card to install NSP but my SD card reader is garbage and will fry for sure with bigger games.

Edit 3: I found goldleaf 0.9, wich install from USB HDD on dock. But i still dont undestand why the switch doesnt get reconized by the pcs.

 

[doop]

Have you tried using a powered usb hub. That`s how I connect my switch on the rare occasion i need to.

 

[SkyDX]

Can someone please give me a reminder? I dumped some save-games from my USER and SYSTEM part on my clean sysMMC via TegraExplorer but how do I convert these again for use with Yuzu/RyujiNX?

It's just two folders with files that are just numbers and I know I did this conversion before but I forgot how and which guide I used

 

[PauloLima]

Have you tried using a powered usb hub. That`s how I connect my switch on the rare occasion i need to.

Will try that. Thanks again.

 

[NeoGranzon]

Someone can explain to me why if I format the sdcard in fat32 atmosphere it does not start and it gives me an error that some files are missing and i have to update the boooader folder,instead if i format the sdcard in exfat atmosphere it starts without problems.
And all afternoon i try and try again and again with the same results.
I am using a samsung 256gb sdcard and the latest package from sdsetup.com,this is a mystery.

 

[Hayato213]

Someone can explain to me why if I format the sdcard in fat32 atmosphere it does not start and it gives me an error that some files are missing and i have to update the boooader folder,instead if i format the sdcard in exfat atmosphere it starts without problems.
And all afternoon i try and try again and again with the same results.
I am using a samsung 256gb sdcard and the latest package from sdsetup.com,this is a mystery.

Should explain what is the error

 

[NeoGranzon]

Should explain what is the error

Yellow writing appears vertically when i try to inject hekate 5.6.5 which says that the minerva libs and things like that are missing and then if i try to run atmosphere a red writing appears that tells me to update the bootloader folder and that it doesn't exist, too the Nyx menu don't appear,instead i have a vertical menu with some options.

 

[Hayato213]

https://gbatemp.net/threads/how-to-hekate-chainload-vanilla-atmos.563255/

If you want you can try this, I guess is that sd setup files is what causing your problem you don't need any of the fss0 build if you learn to do your own setup.

 

[BaconBurg]

I've been trying to install nsp files for the past 2 days but when i try, it gives me the error:

Failed to install LetsgoPikachu.nsp
OpenFileSystemId:122 Failed to open file system with id:
@sdcardcontent://registered/000000FA/9d326feb80bac6f5b8faaacbca2f94eo.nca. Error Code 0x00234c02

I'm using tinwoo because tinfoil wont install. using latest atmosphere on switch 13.2. tinwoo lets me install updates and dlc, just not games. it also gave me this error when I tried to install an xci file instead with other games. any help would be appreciated.

 

[BigOnYa]

I've been trying to install nsp files for the past 2 days but when i try, it gives me the error:

Failed to install LetsgoPikachu.nsp
OpenFileSystemId:122 Failed to open file system with id:
@sdcardcontent://registered/000000FA/9d326feb80bac6f5b8faaacbca2f94eo.nca. Error Code 0x00234c02

I'm using tinwoo because tinfoil wont install. using latest atmosphere on switch 13.2. tinwoo lets me install updates and dlc, just not games. it also gave me this error when I tried to install an xci file instead with other games. any help would be appreciated.

Not sure if will help but read:
https://gbatemp.net/threads/error-0x00234c02-when-installing-nsp.555786/
But sounds like a Sigpatch problem, or a bad game rip.

 

[BaconBurg]

did that but now no application loads except for homebrew launcher and applications via applet mode. everything else just makes a black screen and forces me to force power off the switch. however i was able to install the nsp from applet mode, but when i loaded the game it still black screened me.

 

[BaconBurg]

did that but now no application loads except for homebrew launcher and applications via applet mode. everything else just makes a black screen and forces me to force power off the switch. however i was able to install the nsp from applet mode, but when i loaded the game it still black screened me.

just did a test and found out that by removing kip1patch=nosigchk from the ini it now lets me run the games i had installed, but now i cant install anymore so i think this is the setup i will use until I find a better method. add the line to install games and delete it to play them.

 

[Chaosta]

just did a test and found out that by removing kip1patch=nosigchk from the ini it now lets me run the games i had installed, but now i cant install anymore so i think this is the setup i will use until I find a better method. add the line to install games and delete it to play them.

you need to install sigpatches properly.

 

[ndgxo]

hey all,
quick question. i am trying to import a map on ACNH via NHSE, i can do buildings and acres just fine, however i am getting size errors when trying to upload items and terrain, which tells me the size is different.

i know that this map has the no beach/ocean/cliffs etc. but i am unsure how to edit that or if that is why i am getting the error?

TIA for any help

edit: i think i’ve posted in the wrong place sorry
x