Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,097,295
  • Replies Replies 47,953
  • Likes Likes 66
Hekate has an MTP feature that allows you to transfer files via a USB cable.

What are you trying to boot from Hekate? And what happens when you try booting it?

Booting straight into Atmosphere is vague. There are 2 ways of booting into Atmosphere; either with Hekate or fusee. Fusee is the default method of launching Atmosphere while Hekate requires either user configuration or downloading a pre-configured setup. Booting Atmosphere via Hekate has always been the superior option because not only is it faster but allows you to choose how you want to boot; fusee only boots Atmosphere and won't show you if its booting emuMMC or sysMMC. Using Hekate to inject fusee is the same as using fusee to boot Atmosphere so this is only useful if you're a purist who wishes to boot Atmosphere the intended way but keep Hekate as it is the most useful tool in the Switch scene.

You do not 'install' Hekate nor Atmosphere. Hekate is a payload that you must send every time you turn off the console and Atmosphere exists solely on the SD card; it cannot be installed to the console itself.

So make a copy of your hekate_ipl.ini file, delete the old bootloader folder, put the new onto your SD card, and put the backup of your hekate_ipl.ini file in the new bootloader folder.

Try installing it with TinWoo Installer instead.

1. Where did you download your patches from?
2. Not all places have the updated patches. Games don't need newer patches; new patches are only needed for firmware or CFW updates
3. What options do you see?

While Kosmos is discontinued, that doesn't mean you should switch to vanilla Atmosphere. Kosmos isn't a CFW; its just Atmosphere with Hekate so if you update both, it will achieve the same effect as using Kosmos. Alternatively, there is a spiritual successor to Kosmos called DeepSea that although isn't made by the same team, continues the tradition of bundling Hekate, Atmosphere, and some homebrew apps. Either way, I don't understand why anyone would recommend switching to vanilla Atmosphere as you would lose out on one of the mos valuable tools in the Switch scene which is Hekate. Also the general rule is to always update your CFW before your firmware because newer CFW versions will always support older firmware versions but older CFW versions won't support newer firmware versions.

I don't see anywhere that the Switch supports xCloud. Anyway, there is always a chance of being banned when you hack a console; that's general common sense. Whether you will or will not get banned is up to chance so nobody can tell you for sure what will happen. If you stay offline, you will not get banned but staying offline achieves the same result as being banned meaning no online access.
Thanks Drax

1. Where did you download your patches from? https://github.com/ITotalJustice/patches/releases

2. Not all places have the updated patches. Games don't need newer patches; new patches are only needed for firmware or CFW updates - Ok, so after trying three different files (nsp, xci, eshop etc), multiple installers and all result in corrupted data error when trying to launch the game, what else could it be for Dying Light?

3. What options do you see? When I was on v11, I could boot directly to fusee in Hekate. Now that menu is blank and I only see CFW SYSNAND, EMUEMC or whatever and SYSNAND Stock options. I don't need any features of the CFW/DeepSea, just want to boot to the main menu with no bells and whistles like I did on V11 firmware
 
Thanks Drax

1. Where did you download your patches from? https://github.com/ITotalJustice/patches/releases

2. Not all places have the updated patches. Games don't need newer patches; new patches are only needed for firmware or CFW updates - Ok, so after trying three different files (nsp, xci, eshop etc), multiple installers and all result in corrupted data error when trying to launch the game, what else could it be for Dying Light?

3. What options do you see? When I was on v11, I could boot directly to fusee in Hekate. Now that menu is blank and I only see CFW SYSNAND, EMUEMC or whatever and SYSNAND Stock options. I don't need any features of the CFW/DeepSea, just want to boot to the main menu with no bells and whistles like I did on V11 firmware
  1. Use the patches from this thread. I've never run into any issues when using these.
  2. I suspect the patches you downloaded weren't fully updated. The thread I linked above always has the latest patches
  3. So you were chainloading fusee from the Payloads menu or were you using a Launch option? Were you even using DeepSea before the update?
 
  1. Use the patches from this thread. I've never run into any issues when using these.
  2. I suspect the patches you downloaded weren't fully updated. The thread I linked above always has the latest patches
  3. So you were chainloading fusee from the Payloads menu or were you using a Launch option? Were you even using DeepSea before the update?
1-2: Thank you -- I'll see if that makes a difference.
3. Fusee from the Payloads menu. Yes, whatever DeepSea version went along with v11.0.1 firmware
 
1-2: Thank you -- I'll see if that makes a difference.
3. Fusee from the Payloads menu. Yes, whatever DeepSea version went along with v11.0.1 firmware
Well I'm not sure what happened to the fusee payload but you can download fusee.bin from the Atmosphere GitHub page and put it in the /bootloader/payloads folder so you can launch fusee again from the Payloads menu.
 
I don't see anywhere that the Switch supports xCloud. Anyway, there is always a chance of being banned when you hack a console; that's general common sense. Whether you will or will not get banned is up to chance so nobody can tell you for sure what will happen. If you stay offline, you will not get banned but staying offline achieves the same result as being banned meaning no online access.
I think i can install android os for xcloud
 
I think i can install android os for xcloud
Hmm, seems like it is indeed possible but only through handheld mode. Regardless, if your plan is to simply use Android, then its impossible to get banned. Android runs exclusively from the SD card and doesn't touch the Switch's operating system, Horizon, so you have nothing to fear.
 
Hmm, seems like it is indeed possible but only through handheld mode. Regardless, if your plan is to simply use Android, then its impossible to get banned. Android runs exclusively from the SD card and doesn't touch the Switch's operating system, Horizon, so you have nothing to fear.
Ok nice. How does it works to switch between android and stock firmware?
 
Well I'm not sure what happened to the fusee payload but you can download fusee.bin from the Atmosphere GitHub page and put it in the /bootloader/payloads folder so you can launch fusee again from the Payloads menu.
Ok, replaced sigs with yours and booted into fusee for Dying Light install and now all is good. Thanks D!
 
  • Like
Reactions: Draxzelex
Going to moving to a larger SD card and got a quick question before it arrives.

Can I just copy paste everything on to the fresh SD card and have it working? I made an emunand partition for the current SD so I'm wondering if I just drag and drop will that work? Or will I need to make a fresh partition through hekate first, then copy files? ... or let the switch format it normally, make the partition, then copy/redo things manually?
 
Im trying to use tinfoil to download/install games using the "shops". Iv seen people have the side menu have "new games" I dont see that option. I have added the shop any ideas ?
Iv seen other post about the system date and mine is set to go off of the internet.

also, is there a way to get my saves from my switch light and use them on my og cfw switch ?
 
Last edited by Got_Famous06,
Going to moving to a larger SD card and got a quick question before it arrives.

Can I just copy paste everything on to the fresh SD card and have it working? I made an emunand partition for the current SD so I'm wondering if I just drag and drop will that work? Or will I need to make a fresh partition through hekate first, then copy files? ... or let the switch format it normally, make the partition, then copy/redo things manually?
I'm planning on doing this too and have bookmarked this guide, which has a section specifically for SD cards with a partition based emuMMC: https://nh-server.github.io/switch-guide/extras/transfer_sd/
 
Im trying to use tinfoil to download/install games using the "shops". Iv seen people have the side menu have "new games" I dont see that option. I have added...
I think you might want to edit out the name of that shop. I'm new here so I could be wrong, but posting the name of a shop seems to violate the rules https://gbatemp.net/help/terms/
 
I think you might want to edit out the name of that shop. I'm new here so I could be wrong, but posting the name of a shop seems to violate the rules https://gbatemp.net/help/terms/

I think discussion of shops was allowed, names weren't allowed same as links. I think that was clarified after the SXOS stuff.
 
  • Like
Reactions: HeartFullaNapalm
Im trying to use tinfoil to download/install games using the "shops". Iv seen people have the side menu have "new games" I dont see that option. I have added the carcashoi. any ideas ?
Iv seen other post about the system date and mine is set to go off of the internet.

also, is there a way to get my saves from my switch light and use them on my og cfw switch ?
1) Remove shop name
2) Find a different shop
3) Only if you lite is modded afaik
 
1) Remove shop name
2) Find a different shop
3) Only if you lite is modded afaik

iv edited my post, didnt know that. and the one that i added was supposed to be the "ultimate". doesnt seem like any of them load anything

i think i got the shop working now, not sure what was the issue. thanks
 
Last edited by Got_Famous06,
New here, checked the faq but didn’t see this, so I was wondering if there was a list of games that don’t work on cfw? I know games like fortnite, apex don’t run because they need to connect to Nintendo servers but I was wondering if there’s a complete list of games that don’t run? If I remember correctly, battle grounds doesn’t run well either (i.e create a character and certain other features don’t work properly)
 
I have now android on switch and it works well. Must i everytime connect it to the PC to boot when i was in switch os?
 

Site & Scene News

Popular threads in this forum