Hacking SWITCH NOOB PARADISE - Ask questions here

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
Hello there
I tried to search through but still don’t get what I want to know.
I had my switch (2017 unpatched) on 10.1.0, hacked it with emuMMC on my SD card. Last time I had to install MissionControl, so I turned it off, take SD out and copy MissionControl into it. Then I plugged SD in, and boot my switch up, forgetting to boot RCM and send payload.
I turned it off asap when it showed Home screen.
The question is: if I reboot it with SD card in, will it boot to OFW? Is there any ban risk?
Thanks
If you're only ever using CFW with your emuMMC, then it is completely safe to boot into your clean sysMMC normally. As long as your emuMMC is offline, or has Incognito or 90DNS installed, there's little to no ban risk.

What's on your SD card doesn't matter.
 
  • Like
Reactions: mpham

Scorpiopt

Well-Known Member
Member
Joined
Nov 9, 2013
Messages
185
Trophies
0
Age
37
XP
294
Country
Dumb question but my switch was banned but bought a new one ( not going to be used for hacking) is it safe to login on the same nintendo account?
 

mpham

Member
Newcomer
Joined
Aug 30, 2020
Messages
10
Trophies
0
Age
48
Website
www.martinpham.com
XP
203
Country
Italy
If you're only ever using CFW with your emuMMC, then it is completely safe to boot into your clean sysMMC normally. As long as your emuMMC is offline, or has Incognito or 90DNS installed, there's little to no ban risk.

What's on your SD card doesn't matter.

thanks!
So if i reboot normally, without rcm + payload => switch will boot into OFW, right?
 

Fil o_O

Well-Known Member
Member
Joined
Dec 8, 2014
Messages
327
Trophies
0
Age
38
XP
453
Country
Germany
I've been out of the loop for quite some time. The thread with the serial numbers is still up, so I take it that there has not been any progress in exploit development for the patched units? is that correct?
 

sharingan08

Member
Newcomer
Joined
Aug 2, 2018
Messages
9
Trophies
0
Age
36
XP
92
Country
Philippines
hi, I am on CFW 10.1.0 | AM 0.14.1, and seem to have bricked my switch because of a possible corrupt Lets go Pikachu NSP game. It seems to be stucked on RCM (when I check on TegraRCM, RCM device is detected BUT when I try to "Inject payload" nothing happens) Kindly advise please!
 

WhiteArmor

Well-Known Member
Newcomer
Joined
Aug 11, 2020
Messages
75
Trophies
0
Age
28
Location
USA
XP
173
Country
United States
Hi everyone. When I boot hekate since a few days ago it says there's an update in yellow text - it has me press any key to continue and everything works fine i'm just wondering how to I update this?
 

jucaa

Well-Known Member
Member
Joined
Oct 7, 2012
Messages
148
Trophies
1
XP
676
Country
United States
Hey guys!
I hacked my switch some time ago and its on FW version 9.X with Hekate.

Now i need to update to play the newest games.

Can someone explain how should i update to version 10.X and also update the sigpatches?
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
Hey guys!
I hacked my switch some time ago and its on FW version 9.X with Hekate.

Now i need to update to play the newest games.

Can someone explain how should i update to version 10.X and also update the sigpatches?
Update your CFW and then update to 10.1.0 using Daybreak.
 

dangopig

Well-Known Member
Member
Joined
Aug 8, 2020
Messages
119
Trophies
0
XP
201
Country
Congo, Democratic Republic of the
I've been out of the loop for quite some time. The thread with the serial numbers is still up, so I take it that there has not been any progress in exploit development for the patched units? is that correct?

It's now possible to hack patched Switches with a modchip but that involves opening up the Switch and soldering, which not everyone will like.
 

Lacius

Well-Known Member
Member
Joined
May 11, 2008
Messages
18,099
Trophies
3
XP
18,338
Country
United States
Can you send me the topic for each step?
  1. Make sure the SD card is FAT32.
  2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
  3. Download the latest Atmosphere
  4. Download the latest fusee-primary (next to Atmosphere)
  5. Download these signature patches (for Atmosphere v0.14.1)
  6. Put Atmosphere and the signature patches onto your SD card
  7. Download the 10.1.0 update and put the 10.1.0 folder onto the root of your SD card
  8. Put the SD into your Switch
  9. Enter RCM
  10. Launch Atmosphere using fusee-primary
  11. Open the Homebrew Launcher, preferably using title override (R on a game instead of using the photo album)
  12. Boot Daybreak
  13. Select the 10.1.0 update. Choose the 10.1.0 exFAT option, even though you're using FAT32.
 

jucaa

Well-Known Member
Member
Joined
Oct 7, 2012
Messages
148
Trophies
1
XP
676
Country
United States
  1. Make sure the SD card is FAT32.
  2. Remove all CFW files/folders from your SD card (that would be folders like /sept/ and /atmosphere/)
  3. Download the latest Atmosphere
  4. Download the latest fusee-primary (next to Atmosphere)
  5. Download these signature patches (for Atmosphere v0.14.1)
  6. Put Atmosphere and the signature patches onto your SD card
  7. Download the 10.1.0 update and put the 10.1.0 folder onto the root of your SD card
  8. Put the SD into your Switch
  9. Enter RCM
  10. Launch Atmosphere using fusee-primary
  11. Open the Homebrew Launcher, preferably using title override (R on a game instead of using the photo album)
  12. Boot Daybreak
  13. Select the 10.1.0 update. Choose the 10.1.0 exFAT option, even though you're using FAT32.
Thank you for the help!
Is there any place i can download the update?
 

sharingan08

Member
Newcomer
Joined
Aug 2, 2018
Messages
9
Trophies
0
Age
36
XP
92
Country
Philippines
When Launching CFW emummc or FuSee, the switch does not boot but goes into recovery mode. I have reformatted my SD due to a softbrick for installing a possible corrupted NSP (Letsgo pikachu). Any way I can recover from this? Do I need to boot to stock?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • BigOnYa @ BigOnYa:
    I just been playing offline, and they give you a few bots here n there on your team to help battle. I don't think it's as funny as the other games tho, more battle oriented than humor, which kinda sucks, but I'm still early in it
  • Xdqwerty @ Xdqwerty:
    @BigOnYa, doesnt the game have a campaign mode?
  • BigOnYa @ BigOnYa:
    Yea, and co-op, but you can also start a pvp session and battle just with friends. You get special skill cards (powers) the more you play. And higher value cards, but you can only enable so many cards at a time.
  • K3Nv2 @ K3Nv2:
    If you can find enough for it
  • BigOnYa @ BigOnYa:
    Toilet paper is considered the money, you collect and buy stuff with TP, kinda funny. Graphics are def better than the other games tho, I think they used Unity 5 engine.
  • Psionic Roshambo @ Psionic Roshambo:
    Look if I zoom in enough I can see the herpes!!!
    +1
  • BigOnYa @ BigOnYa:
    In fact I'm gonna go make a drink, roll a fatty n play some, good night to all!
    +2
  • Xdqwerty @ Xdqwerty:
    I bet most people at the time still watched it in black and white
  • SylverReZ @ SylverReZ:
    @Xdqwerty, Many of them did before colour television was common.
  • SylverReZ @ SylverReZ:
    Likely because black and white TV was in-expensive.
    +1
  • K3Nv2 @ K3Nv2:
    It certainly wasn't inexpensive it cost the same as a new car back then
  • K3Nv2 @ K3Nv2:
    How much did a 1965 color TV cost?

    For example, a 21-inch (diagonal) GE color television in 1965 had an advertised price of $499, which is equal to $4,724 in today's dollars, according to the federal government's inflation calculator.
    +1
  • Xdqwerty @ Xdqwerty:
    @K3Nv2, take into consideration how economy was back then
  • K3Nv2 @ K3Nv2:
    Yeah that's why they listed inflation rates
  • Xdqwerty @ Xdqwerty:
    Sorry didnt read that part
  • BakerMan @ BakerMan:
    @LeoTCK don't worry i knew he was joking
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    My first color TV was like 1984 or something lol
  • Psionic Roshambo @ Psionic Roshambo:
    19 inches it was glorious lol
  • SylverReZ @ SylverReZ:
    @Psionic Roshambo, If it doesn't fit, you should've gotten one smaller lol
    +2
  • SylverReZ @ SylverReZ:
    If a racoon can fit up to 8-inches then so be it
    +1
  • Psionic Roshambo @ Psionic Roshambo:
    Lol it it fits I sit? Lol
    +1
  • SylverReZ @ SylverReZ:
    @Psionic Roshambo, Will it blend lol
    +1
    SylverReZ @ SylverReZ: @Psionic Roshambo, Will it blend lol +1