Hacking SWITCH NOOB PARADISE - Ask questions here

[Tenwarrior]

Is there any tool to extract file of a NSP game like text file?

 

[Adran_Marit]

i bought AmazonBasics USB 3.0 to 10/100/1000 Gigabit Ethernet Internet Adapter and connected with it my switch to my LAN while the switch is docked. im using ns-usb and awoo installer to install games over LAN. the speed is way too low tho.

10MB/s over laptop (wifi connection)
15-19MB/s over PC (LAN connection)

it should be alot higher someone who i know in discord gets 60MB/s with the same adapter.

i dont understand anyone know how to get the higher speed?

Could be any number of things... the cable or modem/router? is it plugged into the usb3.0 port on the dock??

 

[Latyana]

Should be 10.1.0 on the firmware, running the latest CFW of your choice

its working fine. tyvm

--------------------- MERGED ---------------------------

would i need to use tesla overlay to use rydogs text 2 cheat on my switch?? i have edizon on this and it doesnt seem to be doing like it should. he showed how to use it but uh its not doing. seen his video on how to use it but alas im confused. ben trying to find an answer for awhiles now and really tired of looking.

 

[Adran_Marit]

its working fine. tyvm

--------------------- MERGED ---------------------------

would i need to use tesla overlay to use rydogs text 2 cheat on my switch?? i have edizon on this and it doesnt seem to be doing like it should. he showed how to use it but uh its not doing. seen his video on how to use it but alas im confused. ben trying to find an answer for awhiles now and really tired of looking.

Maybe, I haven't used tesla so I can't say for certain but it can't hurt to try

 

[smc96]

Do i need to use nxdumptool if the software is downloaded from the eshop?


edit: figured it out, and yes i do

 

[mtlguy]

Is it possible to mod a brand new switch?

 

[Draxzelex]

Is it possible to mod a brand new switch?

A brand new console requires the TX modchip which has to be soldered inside.

 

[mtlguy]

A brand new console requires the TX modchip which has to be soldered inside.

any that connect like usb?or all have to be soldered? I have ver 10.0.2 running and I just got it from walmart.

 

[Draxzelex]

any that connect like usb?or all have to be soldered? I have ver 10.0.2 running and I just got it from walmart.

Its an internal modchip. Your other option is to get an unpatched Switch.

 

[Nerdtendo]

Can I install my own backups onto SX core emunand without getting banned? I want to use cheat codes/avoid switching back and forth as much as possible.

 

[alexj9626]

Havnt followed the scene in a while. Is there any Kosmos like CFW all in one? Is it just better to get atmos and the patches?

 

[Draxzelex]

Can I install my own backups onto SX core emunand without getting banned? I want to use cheat codes/avoid switching back and forth as much as possible.

As long as you never connect to Nintendo's servers with that emuMMC, then it cannot get banned.

Havnt followed the scene in a while. Is there any Kosmos like CFW all in one? Is it just better to get atmos and the patches?

The closest would have to be DeepSea brought to you by the new Team Neptune.

 

[Nerdtendo]

Has anyone been able to watch videos on goldleaf using sxos?

 

[th3joker]

ok....i have a friends switch thats already on atmosphere. does not have autorcm on and is on 10.0.0 firmware. he has a rcmloadr
er usb jig and a slider pin with it. ive personally use one i use my pc and a usb cable to inject payloads. he wants me to update the system update atmosphere and make it easier for his 3 year old kid to use cuz he keeps fully shutting it off or letting the batteries run out.

is there a guide for just updating a cfw not installing from scratch? idk if he has emummc but i assume so . he paid some other guy to mod it but that guy never explained anything to my friend about entering rcm mode so for the last 3 months he hasn't figured out how to get his games to play.

should i put it in autorcm mode for him first as to not burn fuses? idk im a noob and lost atm

 

[simsimsim]

I'm unable to install a split NSP with Goldleaf. The NSP divider divided the NSP into 4 file with number names like 00,01 etc. The folder itself that ends with .NSP is copied to the SD card, but I don't see any option to install it with Goldleaf. Even in extra option, there is no option to install it. Anyone know how this can be installed?

 

[Draxzelex]

Has anyone been able to watch videos on goldleaf using sxos?

Goldleaf has video support? Anyway I'm pretty sure there are better tools for the job like pPlay.

ok....i have a friends switch thats already on atmosphere. does not have autorcm on and is on 10.0.0 firmware. he has a rcmloadr
er usb jig and a slider pin with it. ive personally use one i use my pc and a usb cable to inject payloads. he wants me to update the system update atmosphere and make it easier for his 3 year old kid to use cuz he keeps fully shutting it off or letting the batteries run out.

is there a guide for just updating a cfw not installing from scratch? idk if he has emummc but i assume so . he paid some other guy to mod it but that guy never explained anything to my friend about entering rcm mode so for the last 3 months he hasn't figured out how to get his games to play.

should i put it in autorcm mode for him first as to not burn fuses? idk im a noob and lost atm

Updating CFW is as simple as putting the new files on the SD card. For best results, its recommended to delete the old CFW files from the SD card before applying the new ones.

I'm unable to install a split NSP with Goldleaf. The NSP divider divided the NSP into 4 file with number names like 00,01 etc. The folder itself that ends with .NSP is copied to the SD card, but I don't see any option to install it with Goldleaf. Even in extra option, there is no option to install it. Anyone know how this can be installed?

Why not just use USB install?

 

[simsimsim]

Goldleaf has video support? Anyway I'm pretty sure there are better tools for the job like pPlay.

Updating CFW is as simple as putting the new files on the SD card. For best results, its recommended to delete the old CFW files from the SD card before applying the new ones.

Why not just use USB install?

Installing via USB isn't working for me. Goldleaf would just freeze when I'm trying to browse my PC file.

 

[Adran_Marit]

Installing via USB isn't working for me. Goldleaf would just freeze when I'm trying to browse my PC file.

Use tinfoil or awoo

 

[Deleted User]

Hi!
Im new to the switch scene and have a few quick questions before i start modding.

1. Is this guide updated and safe to use for OFW 10.1.0?
https://switch.homebrew.guide/
EDIT: Just read FAQ, apparently this is updated : ]

2. Is this information outdated? Do I have to do any serial number checks?
https://gbatemp.net/threads/switch-...he-first-post-before-asking-questions.481215/
https://damota.me/ssnc/checker
EDIT: Just read FAQ, apparently this is updated : ]

3. Is their a reliable guide to modding a switch for OFW 10.1.0? All the research Ive done so far is all very confusing.


Thanks for any responses
If their is anything important I am missing please let me know (i.e. any really important HB apps I should install etc)

 

[th3joker]

Goldleaf has video support? Anyway I'm pretty sure there are better tools for the job like pPlay.

Updating CFW is as simple as putting the new files on the SD card. For best results, its recommended to delete the old CFW files from the SD card before applying the new ones.

Why not just use USB install?

to put autorcm on i have to first back everything up and format the card first right?