Hacking RELEASE Sigpatches for Atmosphere (fusee-primary only!)

[Tokiwa]

Thanks, confirmed working on my end with 0.14.1.

Off-topic: I also took the chance to test Daybreak and updated from 10.0.4 to 10.1.0, no issues after updating with it as well.

 

[pofehof]

Off-topic: I also took the chance to test Daybreak and updated from 10.0.4 to 10.1.0, no issues after updating with it as well.

Does Daybreak use the same files that Choi used? Does it also let you choose between FAT32 installation and exFAT, or does it always default to exFAT?

 

[Tokiwa]

Does Daybreak use the same files that Choi used? Does it also let you choose between FAT32 installation and exFAT, or does it always default to exFAT?

It needs some files to be named differently but if you download your firmware files from that "darth site" they are already named correctly (just re-download to be sure, they are changed recently on the website).

Yes it let you choose if you want fat32 or fat32+exfat drivers before installation, it also asks if you want to factory reset.

 

[deejay87]

i made a vid about daybreak, very fast and easy to use

 

[burhansalih]

All the latest stuff does not work for me....Every game I try just gets stuck at at the nintendo switch in the bottom right side of the screen.

Any ideas?

 

[tataniko]

It's not easy to understand the progress without proper date.

Previously, there were two fs patches from April, are they for 10.0.x & 10.1.0?
(3EEBD9B7BCD1B5E0BCC2007D6514F7A4845A1F42AAD795573FD2865DADE1C5E0)
(817EA2B0B702C1F37EC5E0A7A61F745440422037DAA3537CEF4E856C40273F78)

After that, there was a single fs patch from May, what is that patch for?
(DE9FDDA4085DD5FE68DCB20B41095BB4010856AF280201552F38273B44CECD6F)

Thanks.

 

[burhansalih]

ok Im doing a clean install....it looks like exosphere doesn't work...I put =1 in to blank my SN but seems to make the switch not want to load anything..

 

[FocusedWiiWarrior]

It needs some files to be named differently but if you download your firmware files from that "darth site" they are already named correctly (just re-download to be sure, they are changed recently on the website).

Yes it let you choose if you want fat32 or fat32+exfat drivers before installation, it also asks if you want to factory reset.

What would be the difference between picking the fat32+exfat and fat32? If my SD is fat32 which one do I pick?
In choi if you pick exfat while being on fat32, it can brick the Switch. If you select the wrong format on Daybreak, does it have severe repercussions too??

 

[Deleted member 514822]

What would be the difference between picking the fat32+exfat and fat32? If my SD is fat32 which one do I pick?
In choi if you pick exfat while being on fat32, it can brick the Switch. If you select the wrong format on Daybreak, does it have severe repercussions too??

You should choose fat32+exfat. And I don't know where you heard that if you pick exfat in choi while on a fat32 SD it can brick your system. That's incredibly untrue.

 

[burhansalih]

Ok wondering if someone can help I have a clean install of Horizon and AMS14.1 and patches from here installed Animal Crossing with the latest update but it fails to load I installed it fine I click the icon its fine it gets past the Nintendo switch loading icon on the bottom right but then thats it....black screen I can't even exit the game by pressing the home button.

 

[Deleted member 514822]

Ok wondering if someone can help I have a clean install of Horizon and AMS14.1 and patches from here installed Animal Crossing with the latest update but it fails to load I installed it fine I click the icon its fine it gets past the Nintendo switch loading icon on the bottom right but then thats it....black screen I can't even exit the game by pressing the home button.

That doesn't sound like a sigpatch issue. Have you checked if other games work?

 

[burhansalih]

That doesn't sound like a sigpatch issue. Have you checked if other games work?

Yes other games work....for some reason animal crossing refuses to boot if I get past the Nintendo screen it then just gets stuck on the loading screen with the island on the bottom right corner...

Seems like main titles dont work...Cant get BOTW to boot or Super Smash Bros

 

[FocusedWiiWarrior]

You should choose fat32+exfat. And I don't know where you heard that if you pick exfat in choi while on a fat32 SD it can brick your system. That's incredibly untrue.

So if my SD card is fat32, I should pick fat32+exfat. Not fat32. Why? Is the fat32 option less beneficial than the fat32+exfat?
I ended up bricking my Switch when I was downgrading it, months ago. Wasn't sure what did it, me picking exfat instead of fat32?! Or something else. Bunch of people here verified it, saying its because I picked exfat when my SD was fat32.

 

[tataniko]

In the past, the fs patches were always twins for fat32 & exfat.
What is this single fs patch in the release?
(DE9FDDA4085DD5FE68DCB20B41095BB4010856AF280201552F38273B44CECD6F)

The kids tested the new loader patch in 10.0.2/AMS 0.14.1 file based emuMMC & works. Thanks.

 

[Deleted member 514822]

So if my SD card is fat32, I should pick fat32+exfat. Not fat32. Why? Is the fat32 option less beneficial than the fat32+exfat?
I ended up bricking my Switch when I was downgrading it, months ago. Wasn't sure what did it, me picking exfat instead of fat32?! Or something else. Bunch of people here verified it, saying its because I picked exfat when my SD was fat32.

Fat32+exfat supports both file systems as the name implies, and supports larger sd cards. And whoever here told you picking exfat bricked your system is absolutely wrong, it did not.

 

[Tokiwa]

So if my SD card is fat32, I should pick fat32+exfat. Not fat32. Why? Is the fat32 option less beneficial than the fat32+exfat?
I ended up bricking my Switch when I was downgrading it, months ago. Wasn't sure what did it, me picking exfat instead of fat32?! Or something else. Bunch of people here verified it, saying its because I picked exfat when my SD was fat32.

I always picked the exfat option in choi with my fat32 card and never had any issues. I also picked the fat32+exfat in Daybreak and no issues as well.

I'm pretty sure your issue was something else (maybe bad FW files?).

As Ibcap said you should pick the fat32+exfat option since it will give support for both formats, there is no reason to no pick it up to be honest.

 

[Binebina87]

Ok wondering if someone can help I have a clean install of Horizon and AMS14.1 and patches from here installed Animal Crossing with the latest update but it fails to load I installed it fine I click the icon its fine it gets past the Nintendo switch loading icon on the bottom right but then thats it....black screen I can't even exit the game by pressing the home button.

I'm having the exact same issue as you.

I also tried using Hekate (with the other sigpatches) and tried fixing the archive with Hekate. But I cant get ACNH to run with either Hekate or Atmos. Its always stuck on the Switch Icon in the bottom right corner and all I can do is hold down the power button for 12 secs.

Other games like Story of Seasons work.

Anyone got an idea on how to fix that?

 

[LorenzoMS]

Hi, after installing Atmosphere 0.14.1 and the sigpatches I get "Failed to apply 'noldrchk'! on Hekate after launching Atmosphere FSS0 EmuMMC. I even get 'Failed to launch HOS!' when pressing the VOL button on this error screen. Does anybody have any idea on how I might fix it? Thanks.

 

[burhansalih]

I'm having the exact same issue as you.

I also tried using Hekate (with the other sigpatches) and tried fixing the archive with Hekate. But I cant get ACNH to run with either Hekate or Atmos. Its always stuck on the Switch Icon in the bottom right corner and all I can do is hold down the power button for 12 secs.

Other games like Story of Seasons work.

Anyone got an idea on how to fix that?

The only way I managed to fix it was to do a clean install of Horizon and AMS and its now working....bit overkill but it works...you could also try removing any sys-modules you have installed like Edizon overlay etc

 

[Binebina87]

The only way I managed to fix it was to do a clean install of Horizon and AMS and its now working....bit overkill but it works...you could also try removing any sys-modules you have installed like Edizon overlay etc

Yep a clean AMS Install and the removal of the sys-modules did the trick. ACNH boots up again.

Thanks!

EDIT: I think the Emuiibo Folder messed things up. (in atmosphere/contents/0100000000000352)