Hacking SWITCH NOOB PARADISE - Ask questions here

[OrganicSpasm]

Is it true that the current version of Incognito_RCM doesn't work on 10.0.3? I've been meaning to restore my Serial info but I keep getting that "unknown pkg1 version" error.

 

[RODIFIRE]

I had this message
"

RCM Device with initialized successfully!
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected

"
but the screen is black
I dont know how the message should be
so maybe its not able to hacked yet?

 

[Hayato213]

I had this message
"

RCM Device with initialized successfully!
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected

"
but the screen is black
I dont know how the message should be
so maybe its not able to hacked yet?

https://gbatemp.net/threads/a-defin...atched-or-not-purchases-after-07-2018.512018/

Base on this, it is patched.

 

[Iesedobleac]

Hello, everyone. I bought a Nintendo Switch version 2019 (the one in the red box). Right now the only method to be able to run homebrew is by chip? If so, is there any news that it will be possible to do it by software soon? Thanks!

 

[RODIFIRE]

Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!

so I did everythink right but at this moment theres is not a way to hack it?

 

[Hayato213]

Switched to high buffer
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!

so I did everythink right but at this moment theres is not a way to hack it?

Base on your result you got a patched unit, 0x0000 mean the payload was accepted but the system refuse to execute the payload, meaning you got a patched unit.

 

[RODIFIRE]

and I

Base on your result you got a patched unit, 0x0000 mean the payload was accepted but the system refuse to execute the payload, meaning you got a patched unit.

and at the moment I cant do something to hacked only wait right?
I think I do everything correct usb driver say nintendo switch APX MODE
program get green with ok and I had run and fuse test too
and from comant I got this messages
a little different from the others in examples but that what I saw 0x0000
and I have to wait for now?

 

[Hayato213]

and I

and at the moment I cant do something to hacked only wait right?
I think I do everything correct usb driver say nintendo switch APX MODE
program get green with ok and I had run and fuse test too
and from comant I got this messages
a little different from the others in examples but that what I saw 0x0000
and I have to wait for now?

Based on your result you can't use the fusee-gelee exploit via RCM mode, what you can do is that you got to wait for the SX OS modchip to the public to hit the market and get your unit hard modded, on a second note if your firmware is over 7.0.1 then you can't use the software base Deja Vu exploit either.

 

[rollpaste23]

Are there going to be an exploit to downgrade firmwares and also what will happen to the v2 switch and lite since they no longer sell the mod chip

 

[Hayato213]

Are there going to be an exploit to downgrade firmwares and also what will happen to the v2 switch and lite since they no longer sell the mod chip

Switch has fuse for anti downgrade purpose, if you downgrade to a lower firmware with too many fuses burned the system refuse to boot.

 

[kojeek]

Had everything working on windows 7. I upgraded to 10. was trying to use Goldleaf to install an NSP over USB, but when i click explore content>connect to USB on the switch it tells me its not connected to a PC?

i used zadig to try and switch the driver, but the switch doesnt show in the list.

PC doesnt make a connection noise when i plug the switch into it.

if i start goldleaf on the switch windows makes a connection noise, and "goldleaf" shows in zadig, not "nintendo switch", but the switch still says its not connected.

used tegraRCM to install the driver, but it always says APX device driver is missing, every time i run it.

any ideas?

 

[Draxzelex]

Hello, has anyone updated cfw with matching FW from other OFW console? I have both cfw and ofw console and as cfw is on 8.0.1 I'm thinking of instead using Choi just to match 10.0.3 from my OFW but can't find on internet that anyone actually did that without problem?

It will work. Just remember that it will burn fuses if you update without AutoRCM enabled and not running CFW.

Is it true that the current version of Incognito_RCM doesn't work on 10.0.3? I've been meaning to restore my Serial info but I keep getting that "unknown pkg1 version" error.

Thankfully someone forked it to work on 10.0.3. However I hope you learn your lesson from this to not rely on Incognito and use something safer such as 90DNS.

Hello, everyone. I bought a Nintendo Switch version 2019 (the one in the red box). Right now the only method to be able to run homebrew is by chip? If so, is there any news that it will be possible to do it by software soon? Thanks!

If you want to hack a Switch without the chip, buy an unpatched unit.

Had everything working on windows 7. I upgraded to 10. was trying to use Goldleaf to install an NSP over USB, but when i click explore content>connect to USB on the switch it tells me its not connected to a PC?

i used zadig to try and switch the driver, but the switch doesnt show in the list.

PC doesnt make a connection noise when i plug the switch into it.

if i start goldleaf on the switch windows makes a connection noise, and "goldleaf" shows in zadig, not "nintendo switch", but the switch still says its not connected.

used tegraRCM to install the driver, but it always says APX device driver is missing, every time i run it.

any ideas?

Try another combo of installers such as Awoo Installer and NS USBloader.

 

[Krakenfy]

Thanks @Draxzelex !

Is there preferred fw version, or updating to 10.0.3 is fine and stable?

 

[rollpaste23]

What will happen to the v2 switch and lite since the mod chip is discontinued

 

[Draxzelex]

Thanks @Draxzelex !

Is there preferred fw version, or updating to 10.0.3 is fine and stable?

Personally I recommend updating to 9.2

What will happen to the v2 switch and lite since the mod chip is discontinued

The modchip is not discontinued as far as I'm aware.

 

[fatsquirrel]

Do you have a modded console? what Payloader r u using?

dude...that was from 2 years ago

 

[Latyana]

Is there an easier way to find out if it's patched or not? I honestly can't afford the chance if somehow i accidentally fry my switch thru checking the fusee gelee part. Ugh.

 

[pLaYeR^^]

Is there an easier way to find out if it's patched or not? I honestly can't afford the chance if somehow i accidentally fry my switch thru checking the fusee gelee part. Ugh.

Buy a jig if you don’t want to use the tinfoil method.

 

[oeffnen]

Hello,
I wanted to know, how can I switch from Kosmos to Atmospehre. Is it just coping the atmosphere files on the sd-card and override the kosmos files? Or do I have to delete some files before? I want to switch completly to atmosphere, so if there is a save way to get rid of kosmos but keep all my configs/homebrew-apps etc, that would be very nice

 

[Latyana]

Buy a jig if you don’t want to use the tinfoil method.

Jig? Tinfoil method?? Im lost lol